mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Updated Expanding Sonoffs (markdown)

Theo Arends 2017-03-15 12:35:01 +01:00
parent 2028e8473a
commit 0d1af51fbe
1 changed files with 3 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Expanding-Sonoffs.md

@ -39,13 +39,13 @@ If a pin is defined as GPIO_USER in the module template, you can assign it one o
# Examples
1. If you take a Sonoff Basic and connect a switch between pin4 (ground) and pin5 (GPIO4) of the 5 pin programming header you now have a second switch connected to the device. You can set this through the module config page as option `09 Switch1` or from the command line with `gpio4 9`
1. If you take a Sonoff Basic and connect a switch between pin4 (ground) and pin5 (GPIO4) of the 5 pin programming header you now have a second switch connected to the device. You can set this through the module config page as option ``09 Switch1`` or from the command line with ``gpio4 9``
If you have fewer than two relays on the module, the additional switch(es) will not show up any different than the built-in switch and will control the single relay unless you set switchtopic to something other than 0 (either 1 or a custom topic). Once this is done the built-in switch will produce `stat/<topic>/POWER1` while the new switch will produce `cmnd/<switchtopic>/POWER1`
If you have fewer than two relays on the module, the additional switch(es) will not show up any different than the built-in switch and will control the single relay unless you set switchtopic to something other than 0 (either 1 or a custom topic). Once this is done the built-in switch will produce ``stat/<topic>/POWER1`` while the new switch will produce ``cmnd/<switchtopic>/POWER1``
With more relays on the modules, the additional switch will create additional POWER\<n> events without the need to set switchtopic.
you can set the mode of each switch individually with switchmode1 or switchmode2
you can set the mode of each switch individually with ``switchmode1`` or ``switchmode2``
2. Instead of connecting a switch, you could connect a 4-pin 2.5mm jack, with the pins wired:
* tip pin5 (GPIO4)