mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Updated Commands (markdown)

blakadder 2019-10-27 22:04:43 +01:00
parent a4dd6831f0
commit 0dc864f510
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Commands.md

@ -394,7 +394,7 @@ SetOption31<a id="SetOption31"></a>|Disable status LED blinking during Wi-Fi an
SetOption32<a id="SetOption32"></a>|Number of 0.1 seconds to hold button before sending `HOLD` action message.<BR> `1..100` to set button hold time *(default = `40`)*. This option also affects the time required to perform a firmware defaults reset (10x `HOLD` action time)
SetOption33<a id="SetOption33"></a>|Max power limit can be exceeded by number of seconds before the relay is turned off<BR> `1..250` = set number of seconds *(default = `5`)*
SetOption34<a id="SetOption34"></a>|`0..255` = set [Backlog](#backlog) inter-command delay in milliseconds *(default = `200`)*&emsp; » v6.6.0.17
SetOption36<a id="SetOption36"></a>|xžBoot loop defaults restoration control.&emsp; » v6.6.0.17<BR>`0` = disable boot loop control<BR> `1..200` = set number of boot loops (a restart caused by any exception or watchdog timer within less than `BOOT_LOOP_TIME` (default 10 seconds) before beginning to restore settings *(default = `1`)*. Once this number is reached, subsequent restarts will:<ul><li>1<sup>st</sup> restart: disable ESP8285 generic GPIOs interfering with flash SPI</li><li>2<sup>nd</sup> restart: disable rules causing boot loop</li><li>3<sup>rd</sup> restart: disable all rules</li><li>4<sup>th</sup> restart: reset user defined GPIOs to disable any attached peripherals</li><li>5<sup>th</sup> restart: reset module to Sonoff Basic (1)</li></ul>
SetOption36<a id="SetOption36"></a>|Boot loop defaults restoration control.&emsp; » v6.6.0.17<BR>`0` = disable boot loop control<BR> `1..200` = set number of boot loops (a restart caused by any exception or watchdog timer within less than `BOOT_LOOP_TIME` (default 10 seconds) before beginning to restore settings *(default = `1`)*. Once this number is reached, subsequent restarts will:<ul><li>1<sup>st</sup> restart: disable ESP8285 generic GPIOs interfering with flash SPI</li><li>2<sup>nd</sup> restart: disable rules causing boot loop</li><li>3<sup>rd</sup> restart: disable all rules</li><li>4<sup>th</sup> restart: reset user defined GPIOs to disable any attached peripherals</li><li>5<sup>th</sup> restart: reset module to Sonoff Basic (1)</li></ul>
SetOption37<a id="SetOption37"></a>|Color remapping for led channels, also provides an option for allowing independent handling of RGB and white channels.&emsp; » v6.5.0<BR>`0` = disabled<br>`1..119` = according to [this table](SetOption37---Color-channel-mapping)<br>`120..127` = invalid (results in same as `0`)<br>`128..255` = same as `0..127` but with independent channel handling enabled
SetOption38<a id="SetOption38"></a>|`6..255 ` = set IRReceive protocol detection sensitivity minimizing UNKNOWN protocols&emsp; » v6.6.0
SetOption39<a id="SetOption39"></a>|Control handling of invalid power measurements. [Read more...](Power-monitoring-calibration#known-issues)&emsp; » v6.6.0<BR>`0` = reset to default on next restart<BR>`1..255` = number of invalid power readings before reporting no load *(default =`128`)*.