mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

I ran into difficulties with a very similar switch. Impossible to control from Tasmota - until I flashed the sonoff.bin rather than then sonoff-basic or classic firmware files. As such I am proposing this edit to ensure that others benefit from this (missing?) information.

nealeydee 2019-04-04 16:33:18 +02:00
parent 7e9dc410de
commit 1d5a9b06d1
1 changed files with 1 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Dimmer-switch-with-Nuvoton-chip.md

@ -43,6 +43,7 @@ TX to TX
SW to GND -- only durning power up, to put the ESP in programming mode.
From here the upload is the same as for all other Tasmota devices. See the [Tasmota page](https://github.com/arendst/Sonoff-Tasmota/wiki/Upload) for detailed info.
Note: sonoff basic and classic variants do not support the serial bridge. To get this working you should use the standard sonoff.bin - NOT basic or classic.
After the upload was successful, unplug the device from the serial adapter. You can now desolder all the connections you have made earlier. Also remove the wire between RES1 and GND.
Then plug the board back in its housing. Be careful with the connector on the underside of the board.