Updated Builds (markdown)

blakadder 2019-10-25 13:35:52 +02:00
parent 24d6ef13cf
commit 23da9bcd5a
1 changed files with 1 additions and 1 deletions

@ -11,7 +11,7 @@ Features that are not available in any release build have to be enabled in sourc
**sonoff-BG.bin** to **sonoff-TW.bin** the same features as _sonoff.bin_ with localized language support. *(Note: sonoff-UK.bin is for the Ukrainian language)*
- **sonoff-basic.bin** *(bas)* addresses a problem with some Sonoff Basics that lack sufficient electrical power (due to its poor design) to properly run the electronics. In this firmware variant, most sensors are disabled to minimize background tasks. This reduces the required CPU cycles in order to reduce power draw to allow the device to run reliably.
>This is the pre-compiled Tasmota binary that comes bundled within the Tuya-Convert package when you install their OTA flashing tool. If you used Tuya-Convert to flash your device, it is strongly recommended to update to `sonoff.bin`. Otherwise some crucial features (e.g., energy monitoring, auto-discovery, etc.) will not work.
- **sonoff-classic.bin** *(cla)* stripped down version but it allows initial installation using either [Wi-Fi Manager](Initial-Configuration#configure-wi-fi), [WPS](https://en.wikipedia.org/wiki/Wi-Fi_Protected_Setup) or [ESP8266 SmartConfig](http://techiesms.com/iot-projects/now-no-need-enter-ssid-name-password-inside-code-esp8266-smart-config/).
- **sonoff-classic.bin** **!DISCONTINUED SINCE v6.7.0!** *(cla)* stripped down version but it allows initial installation using either [Wi-Fi Manager](Initial-Configuration#configure-wi-fi), [WPS](https://en.wikipedia.org/wiki/Wi-Fi_Protected_Setup) or [ESP8266 SmartConfig](http://techiesms.com/iot-projects/now-no-need-enter-ssid-name-password-inside-code-esp8266-smart-config/).
- **sonoff-minimal.bin** *(min)* is a specialised build to subsequently allow OTA uploads. ***This version should NOT be used for initial installation!***
- **sonoff-sensors.bin** *(sns)* enables the same features as _sonoff.bin_ and includes support for additional sensors
- **sonoff-knx.bin** *(knx)* includes [KNX](KNX-Features) support but omits some features. If you need additional features, compile your own firmware (e.g., [Gitpod](Compiling-Tasmota-on-Gitpod)).