update RF pairing procedure

arendst 2017-04-08 17:48:49 +02:00
parent abd824da30
commit 3c2ebd075b
1 changed files with 6 additions and 0 deletions

@ -6,3 +6,9 @@ To pair a RF remote control with the Sonoff RF it is important that there is NO
User [gadjet](https://github.com/gadjet) installed a jumper in place of R21 allowing easy programming (jumper in), pairing (jumper out) and normal use (jumper out). User [gadjet](https://github.com/gadjet) installed a jumper in place of R21 allowing easy programming (jumper in), pairing (jumper out) and normal use (jumper out).
<img alt="RF jumper" src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoffrfjmpr.jpg" align="left" /> <img alt="RF jumper" src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoffrfjmpr.jpg" align="left" />
Pairing a RF remote is the same as with iTead software:
- two short button presses will blink a red led shortly and start RF signal recognition. Three longer blinks signal RF reception.
- three short button presses will keep the red led on for some seconds and erase the known RF code.
I was unable to pair the Sonoff RF 434MHz receiver with any of my KaKu switches so to me the RF functionality is a bit disappointing.