mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Improve image alignment.

Johan Bloemberg 2017-07-25 22:22:35 +02:00
parent 8d620e8639
commit 43c61ac3b6
1 changed files with 7 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
Hardware-Preparation.md

@ -93,14 +93,17 @@ Programming the on-board 3.3V [PSA-B](https://www.itead.cc/psa-01.html) is possi
Flashing the ESP8266
Remove the 4 screws on the bottom.
<img alt="SonoffSC" src="https://puu.sh/vZZRI/ff36ff9244.jpg" width="230" align="right"/> The button is connected to GPIO0.
The button is connected to GPIO0.
You will have to remove the TX jumper in the board to avoid the ATMega328P to interfere in the upload process.
<img alt="SonoffScRemoveTX" src="https://puu.sh/vZZSi/43244f3cc1.jpg" width="230" align="right"/>
Press and hold the button while powering the board to set the ESP8266 into flashing mode.
Note! After flashing you need to set the baudrate to 19200.
Don't forget to reconnect the TX jumper after flashing ;)
<img alt="SonoffSCButoom" src="https://puu.sh/vZZSC/aaa140afa3.jpg" width="130" align="right"/>
<img alt="SonoffSC" src="https://puu.sh/vZZRI/ff36ff9244.jpg" width="230" />
<img alt="SonoffScRemoveTX" src="https://puu.sh/vZZSi/43244f3cc1.jpg" width="230" />
<img alt="SonoffSCButoom" src="https://puu.sh/vZZSC/aaa140afa3.jpg" width="130" />
### 4CH Pro
@ -110,5 +113,4 @@ To program the ESP chip disconnect power from the board, connect a cable from an
Use the ESP programming header as described in the picture to upload the firmware and follow regular programming procedure.
<img title="Sonoff 4CH Pro programming" src="https://github.com/arendst/arendst.github.io/blob/master/media/4chpro_gpio0.JPG" width="50%" />
<img title="Sonoff 4CH Pro programming" src="https://github.com/arendst/arendst.github.io/blob/master/media/4chpro_gpio0.JPG" width="50%"/>