mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Updated Commands (markdown)

Michael Ingraham 2019-07-25 15:29:09 -04:00
parent 06e2043002
commit 453ef2255e
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Commands.md

@ -114,7 +114,7 @@ LedPower\<x\> | LED\<x\> power state control. **Enabled only when LedLink(i) is
LedState | Manage LED state<BR> `0` = disable use of LED as much as possible <BR> `1` = show power state on LED (LED on when power on) *(default)* *(inverted for Sonoff Touch/T1)*<BR> `2` = show MQTT subscriptions as a LED blink<BR> `3` = show power state and MQTT subscriptions as a LED blink<BR> `4` = show MQTT publications as a LED blink<BR> `5` = show power state and MQTT publications as a LED blink<BR> `6` = show all MQTT messages as a LED blink<BR> `7` = show power state and MQTT messages as a LED blink<BR><BR>`8` = LED on when Wi-Fi and MQTT are connected. ***Cannot be issued directly*** and is only activated when `LedPower` is switched from `0` to `1`<a id="Power"></a>
Power\<x\> | Control the corresponding Relay (enumerated) power state and also restart PulseTime\<x\><BR> `0` / `off` = turn OFF <BR> `1` / `on` = turn ON <BR> `2` / `toggle` = if relay is `ON` switch to `OFF` and vice versa<BR> `3` / `blink` = toggle power for [BlinkCount](#blinkcount) times each [BlinkTime](#blinktime) duration (at the end of `blink`, relay power is returned to pre-blink state)<BR> `4` / `blinkoff` = stop blink sequence and return relay power to pre-blink state<a id="PowerOnState"></a>
PowerOnState | Control relay state after _**powering up**_ the device. [More information](PowerOnState-Configuration)<BR> `0` / `OFF` = keep relay(s) OFF after power up <BR> `1` / `ON` = turn relay(s) ON after power up <BR> `2` / `TOGGLE` = toggle relay(s) from last saved state <BR> `3` = switch relay(s) to their last saved state *(default)* <BR> `4` = turn relay(s) ON and disable further relay control <BR> `5` = after a `PulseTime` period turn relay(s) ON (acts as inverted [`PulseTime`](Commands#pulsetime) mode)<a id="PulseTime"></a>
PulseTime\<x\> | Display the amount of `PulseTime` remaining on the corresponding Relay (enumerated)<BR>`<value>` Set the duration to keep the corresponding Relay `ON` when `Power<x> ON` command is issued. After this amount of time, the relay will be turned `OFF`.<BR>`0` / `OFF` = disable use of PulseTime for the corresponding Relay<BR>`1..111` = set PulseTime for the corresponding Relay in 0.1 second increments<BR>`112..64900` = set PulseTime for the correspondingRelay, offset by 100, in 1 second increments. Add 100 to desired interval in seconds, e.g., `PulseTime 113` = 13 seconds and `PulseTime 460` = 6 minutes (i.e., 360 seconds)<BR><a id="SwitchDebounce"></a>
PulseTime\<x\> | Display the amount of `PulseTime` remaining on the corresponding Relay (enumerated)<BR>`<value>` Set the duration to keep the corresponding Relay `ON` when `Power<x> ON` command is issued. After this amount of time, the relay will be turned `OFF`.<BR>`0` / `OFF` = disable use of PulseTime for the corresponding Relay<BR>`1..111` = set PulseTime for the corresponding Relay in 0.1 second increments<BR>`112..64900` = set PulseTime for the corresponding Relay, offset by 100, in 1 second increments. Add 100 to desired interval in seconds, e.g., `PulseTime 113` = 13 seconds and `PulseTime 460` = 6 minutes (i.e., 360 seconds)<BR><a id="SwitchDebounce"></a>
SwitchDebounce | User control over switch debounce timing <BR> `40..1000` = set switch debounce time in ms. Default is `40`<a id="SwitchMode"></a>
SwitchMode\<x\> | [Switch mode](Buttons-and-Switches#switchmode) <BR> `0` = toggle *(default)* <BR> `1` = follow (0 = off, 1 = on) <BR> `2` = inverted follow (0 = on, 1 = off) <BR> `3` = pushbutton (default 1, 0 = toggle) <BR> `4` = inverted pushbutton (default 0, 1 = toggle) <BR> `5` = pushbutton with hold (default 1, 0 = toggle, Hold = hold) <BR> `6` = inverted pushbutton with hold (default 0, 1 = toggle, hold = hold) <BR> `7` = pushbutton toggle (0 = toggle, 1 = toggle)
See also | [`SetOption11`](#SetOption11) - Swap pushbutton single and double press functionality<BR>[`SetOption13`](#SetOption13) - Allow immediate action on single button press<BR>[`SetOption26`](#SetOption26) - Use indexes even when only one relay is present<BR>[`SetOption31`](#SetOption31) - Disable Wi-Fi LED status blinking<BR>[`SetOption32`](#SetOption32) - Set hold interval before sending `HOLD` action