Updated PAJ7620 (markdown)

PAJ7620.md

@@ -25,16 +25,18 @@ Compile Tasmota with `#define USE_PAJ7620` uncommented in `user_config_override.
   
 
 
-### 0 - no readings / muted sensor  
+### 0 - No readings / muted sensor  
 ### 1 - Gesture Mode:
 gesture names: Up, Down, Left, Right, Near, Far, CW (clockwise rotation), CCW (counter-clockwise rotation)  
-TELE-message: …{Up:1}
+TELE-message:  
+…{Up:1}  
 …{Left:3} -> 3 times „Left“ in a row, without any other gesture in between
 
 ### 2 - Proximity Mode:
 Arbitrary value between 0 (far away) and 255 (very near) are given. Exit from the sensor field will always give at least one „zero message“. TELE is only triggered, when the value has changed  
-TELE-message: …{Proximity:255} - virtually touching the sensor in close proximity
-…{Proximity:0}	- object has left the sensing volume
+TELE-message:  
+…{Proximity:255} - virtually touching the sensor in close proximity  
+…{Proximity:0}	- object has left the sensing volume  
 
 ### 3 - Corner Mode:
 Quarters of the sensing volume(area) are organised like this:  
@@ -45,15 +47,18 @@ Quarters of the sensing volume(area) are organised like this:
 
 
 An object in one of the corners will trigger the corresponding number, a bit like a pie menu in a GUI.  
-TELE-message: …{Corner:2} - upper right corner
+TELE-message:  
+…{Corner:2} - upper right corner
 
 ### 4- PIN mode:
 Based on the corner mode a fluent movement of an object through a given sequence of corners (e.g. 1,2,3,4 -> begin upper left, move right, move diagonally down left, move right) will trigger a valid „PIN“.  
-TELE-message: …{PIN:1} - valid PIN
+TELE-message:  
+…{PIN:1} - valid PIN
 
 ### 5- Cursor mode:
 Shows x- and y-coordinates, mainly intended for debugging and „seeing“ the sensing area. This reads only the upper 5-bit-values, which automatically removes much of the jitter, giving values between 0 and 15.  
-TELE-message: …{x:1, y:15} - upper left corner
+TELE-message:  
+…{x:1, y:15} - upper left corner
 
 
 ***