mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

explain that flash mode is entered by the 'button'; it isn't explained otherwise except "hey watch this long video".

Ted Timmons 2019-04-30 12:03:02 -07:00
parent 19f00e338b
commit 4e54e6f48a
1 changed files with 2 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Sonoff-Pow-and-Pow-R2.md

@ -27,6 +27,8 @@ As always, you need to access the serial interface.
- **Pow R2**: The **four serial pins** (VDD, E-RX, E-TX, GND) are available at the rear/short end of the PCB. Do not use I04 and I05.
- **Pow**: The **four serial pins** (3V3, Rx, Tx, GND) are available at the rear/short end of the PCB as can be seen in the upper part of the image to the right.
To enter **flash mode**, press down on the button while powering the device.
Note - After the module type is changed to "Sonoff Pow" or "Sonoff Pow R2" using the "module" command, the serial port is no longer available for entering configuration commands because the serial port is used to communicate to the power measurement chip. Make sure you have set up your network connection before doing this.
### Video tutorial by alsolh