mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Adding Variant pinout

edit21 2017-12-16 16:33:58 +00:00
parent 6f522ae3a8
commit 53bbe983c9
1 changed files with 5 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
MagicHome-LED-strip-controller.md

@ -48,4 +48,8 @@ Some GPIO are preconfigured with the board:
Due to variants, you can configure:
- GPIO04 - on non-IR boards, it's an open pin you can use for Onewire, button or something else. It might have pull-down resistor and/or bypass capacitor, so please take that into consideration. On IR-enabled boards, IR receiver is connected to this pin, so you can use IRRecv as functionality.
- GPIO13 - This pin is not used on RGB board (so you'll leave it as "None"), but on RGBW, it's driving another channel (cold white or warm white) for LED strip.
- GPIO13 - This pin is not used on RGB board (so you'll leave it as "None"), but on RGBW, it's driving another channel (cold white or warm white) for LED strip.
Variant without Rx/Tx pads:
![](https://bytebucket.org/xoseperez/espurna/wiki/images/flashing/ledcontroller-20-flash.jpg?rev=d9ba29098b873a331c76b1b8c4ac2614e1b4022e)