mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Added LED HEX10 Color Codes

nick 2017-11-26 18:12:35 -06:00
parent d67f416bf7
commit 5a41c86d07
1 changed files with 13 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
Sonoff-B1.md

@ -14,3 +14,16 @@ As always, you need to access the serial interface. First pop up the top part of
The **four serial pins** (3V3, Rx, Tx, GND) as well as the GPIO0 signal line are available as test points and clearly marked. Solder wires to those or use pogo pins as you prefer. The **four serial pins** (3V3, Rx, Tx, GND) as well as the GPIO0 signal line are available as test points and clearly marked. Solder wires to those or use pogo pins as you prefer.
As with all modules pulling GPIO0 to GND is needed to put the chip in programming mode. You need to **connect GPIO0 and GND** during power up. An additional GND pad is available in the middle of the PCB. As with all modules pulling GPIO0 to GND is needed to put the chip in programming mode. You need to **connect GPIO0 and GND** during power up. An additional GND pad is available in the middle of the PCB.
### LED HEX10 Color Codes
The Sonoff B1 uses a TEN charter HEX code for all colors.
Colors tested with firmware 5.9.1 20171107:
* 00000000A0 = WARM
* 000000A000 = COOL
* 0000A00000 = BLUE
* FF14500000 = PURPLE
* 551A8B0000 = DARK PURPLE
* A300000000 = RED
* 00ff000000 = GREEN