mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Typo

Michael Ingraham 2019-10-23 15:00:18 -04:00
parent 425da8dae9
commit 5a682f9c11
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
FAQ.md

@ -161,7 +161,7 @@ We've also seen reports then when a specific LED light bulb was hooked up near o
All you can really do is check the solder joints, move the device closer to your Access Point. If all else fails, replace the device.
### Weaker Wi-Fi signal after upgrade
In some cases the Wi-Fi signal strength (RSSI) drops significantly after upgrading to a newer version, specially when upgrading the Arduino core version. In such a case it is good to save the devicee configuration and run `reset 5` command which erases all flash and resets parameters to firmware defaults but keeps Wi-Fi settings. This also deletes Wi-Fi calibration data and after a restart Wi-Fi will recalibrate. After this is done you will need to configure your device back to its previous settings.
In some cases the Wi-Fi signal strength (RSSI) drops significantly after upgrading to a newer version, specially when upgrading the Arduino core version. In such a case it is good to save the device configuration and run [`Reset 5`](Commands#reset) command which erases all flash and resets parameters to firmware defaults but keeps Wi-Fi settings. This also deletes Wi-Fi calibration data and after a restart Wi-Fi will re-calibrate. After this is done you will need to configure your device back to its previous settings.
## MQTT
### Cannot connect to my MQTT broker