mirror of https://github.com/arendst/Tasmota.git
Updated Templates (markdown)
parent
62f848ecda
commit
6b708f7074
|
@ -195,7 +195,7 @@ The FLAG value is an 8-bit mask where each bit controls a feature. Add FLAG valu
|
|||
FLAG | Mask | Feature description
|
||||
-----|----------|------------------------------
|
||||
0 | xxxxxxxx | No features
|
||||
<a id="ADC0"> </a> 1 | xxxxxxx1 | Allowing to use Analog0 (ADC0) as input if define USE_ADC_VCC in ``my_user_config.h`` is disabled<BR>Selecting ADC0 allows input of an analog signal through the ADC0 (A.K.A. A0) ESP8266 input (pin 6). **Check your ESP8266 version**. In earlier versions chip, the A0 pin operated at maximum voltage of 1.0V. Newer versions allow an input voltage in the range between 0 and 3.3 volts. You may need to use a voltage divider to ensure your input voltage is in the right range. ADC0 will be reported in telemetry messages as well as in the web UI. It can also be used as a [trigger](Rules#adc0) in [rules](Rules).
|
||||
<a id="ADC0"> </a> 1 | xxxxxxx1 | Allowing to use Analog0 (ADC0) as input if define USE_ADC_VCC in ``my_user_config.h`` is disabled<BR>Selecting ADC0 allows input of an analog signal through the ADC0 (A.K.A. A0) ESP8266 input (pin 6). **Check your ESP8266 version**. In earlier chip versions, the A0 pin operated at maximum voltage of 1.0V. Newer versions allow an input voltage in the range between 0 and 3.3 volts. You may need to use a voltage divider to ensure your input voltage is in the right range. ADC0 will be reported in telemetry messages as well as in the web UI. It can also be used as a [trigger](Rules#adc0) in [rules](Rules).
|
||||
2 | xxxxxx1x | Not used
|
||||
4 | xxxxx1xx | Not used
|
||||
8 | xxxx1xxx | Not used
|
||||
|
|
Loading…
Reference in New Issue