mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Updated Mirabella Genio Bulb (markdown)

so3n 2019-02-04 15:16:02 +11:00
parent e52d51ebca
commit 703fa39b47
1 changed files with 1 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Mirabella-Genio-Bulb.md

@ -8,6 +8,7 @@ There are two ways: Over the Air (OTA) or via Serial.
Flashing over the air requires running a linux shell script called [tuya-convert](https://github.com/ct-Open-Source/tuya-convert) and hence requires a computer (I used a Raspberry PI 3) with a wifi adaptor that supports AP mode. There are options if you run Windows to use either a virtual machine (it is reported that KALI Linux running on VMWare has worked) or potentially a live usb (I haven't tested it).
Follow this [procedure](https://github.com/ct-Open-Source/tuya-convert#procedure).
To get the bulb into config mode, have the bulb on for at least 10 seconds, then cycle it off and on 3 times via a physical light switch. The bulb should flash rapidly when its in config mode.
The lightbulb will create an access point that you can connect to after it has been flashed.