Updated Smart Meter Interface Descriptors (markdown)

Smart-Meter-Interface-Descriptors.md

@@ -4,6 +4,7 @@
 - [COMBO Meter (Water,Gas,SML)](#COMBO-Meter-WaterGasSML)
 - [WOLF CSZ 11/300 Heater](#WOLF-CSZ-11300-Heater)
 - [MODBUS Device](#MODBUS-Device)
+- [Hager EHZ363 (SML) with daily values](#Hager-EHZ363-SML-with-daily-values)
 ------------------------------------------------------------------------------
 
 #### Hager EHZ363 (SML)
@@ -139,3 +140,66 @@
 [Back To Top](#top)
 
 ------------------------------------------------------------------------------
+
+
+#### Hager EHZ363 (SML) with daily values
+
+>`>D` 
+pin=0  
+pout=0  
+pi_d=0  
+po_d=0  
+hr=0  
+; permanent midnight values  
+p:pi_m=0  
+p:po_m=0  
+
+
+>`>B`  
+=>sensor53 r  
+
+>`>T`  
+; get total consumption and total feed  
+pin=SML#Total_in  
+pout=SML#Total_out  
+
+>`>S`  
+; on midnight, save meter total values  
+hr=hours  
+if chg[hr]>0  
+and hr==0  
+then  
+pi_m=pin  
+po_m=pout  
+svars  
+endif  
+
+>; on teleperiod calculate current daily values from midnight  
+if upsecs%tper==0  
+then  
+pi_d=pin-pi_m  
+po_d=pout-po_m  
+endif  
+
+>; show these values on WEB UI  
+>`>W`  
+Tagesverbrauch: {m} %pi_d% kWh  
+Tageseinspeisung: {m} %po_d% kWh    
+
+>; transmit these values with MQTT  
+>`>J`  
+;"daily_consumption":%pi_d%,"daily_feed":%po_d%  
+
+>; meter definition  
+>`>M 1`  
++1,3,s,0,9600,SML  
+  
+>1,77070100010800ff@1000,Verbrauch,KWh,Total_in,4  
+1,77070100020800ff@1000,Einspeisung,KWh,Total_out,4  
+1,77070100100700ff@1,Aktueller Verbrauch,W,Power_curr,0  
+1,77070100000009ff@#,Zähler Nr,,Meter_number,0  
+\#
+
+[Back To Top](#top)
+
+------------------------------------------------------------------------------