mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Updated Modules (markdown)

Michael Ingraham 2019-05-16 08:31:51 -04:00
parent d175300535
commit 745e60bd49
1 changed files with 70 additions and 71 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

141
Modules.md

@ -5,77 +5,76 @@ A **module** is a firmware supported device which has specific code to enable on
**Configure Module** page is used to configure your device as one of the modules **and** to configure additional components connected to one of the free GPIO pins.
> Use Generic module (`Module 18`) to have almost all GPIO pins available.
Each module is assigned a number which is used in [Template configuration](templates#base) or when using [`Module`](commands#module) command.
Each module is assigned a number which is used in [Template configuration](templates#base) or when using [`Module`](commands#module) command. Built-in modules have the required GPIO assignments coded for the device to function properly. In addition, some modules include special programming (e.g., calibrated power monitoring). The following table lists hard-coded device specific functionality. Notice that not all device modules need special programming.
| #| Name| Module specifics
| ---: | :--- | :---
| 0 | Template | Module from currently active template. Named after the template NAME field.|
| 1 | Sonoff Basic |
| 2 | Sonoff RF |
| 3 | Sonoff SV |
| 4 | Sonoff Th |
| 5 | Sonoff Dual | Process relay and button via hardware serial interface using GPIO01 and GPIO03. Change baudrate to 19200 bps. Process buttons as single press only
| 6 | Sonoff Pow |
| 7 | Sonoff 4Ch |
| 8 | Sonoff S2X |
| 9 | Slampher |
| 10 | Sonoff Touch | Invert LedState 1 functionality
| 11 | Sonoff LED | Set light type to 2 PWM channels disregarding SetOption15. Fix device specific LED instabilities by disabling GPIO04, GPIO5 and GPIO14
| 12 | 1 Channel |
| 13 | 4 Channel |
| 14 | Motor C/AC | Force all relays ON at Power On and disable command PowerOnState
| 15 | ElectroDragon |
| 16 | EXS Relay(s) | Enable pulse latching using even/odd numbered relay pairs
| 17 | WiOn |
| 18 | Generic | Show Wemos specific pin information in GUI
| 19 | Sonoff Dev |
| 20 | H801 | Change hardware UART Tx from GPIO01 to GPIO02
| 21 | Sonoff SC | Enable and Process data via hardware serial interface using GPIO01 and GPIO03. Change baudrate to 19200 bps
| 22 | Sonoff BN-SZ | Set light type to 1 PWM channel disregarding SetOption15
| 23 | Sonoff 4Ch Pro | Button handling disregarding SetOption13 only allowing single press to enable RF learning while holding the button
| 24 | Huafan SS |
| 25 | Sonoff RF Bridge | Enable and Process data via hardware serial interface using GPIO01 and GPIO03. Change baudrate to 19200 bps. Process 16 buttons in web GUI. Enable EFM8BB1 firmware upload
| 26 | Sonoff B1 | Set light type to RGBWC using MY92x1
| 27 | Ailight | Set light type to RGBW using MY92x1
| 28 | Sonoff T1 1Ch | See 10
| 29 | Sonoff T1 2Ch | See 10
| 30 | Sonoff T1 3Ch | See 10
| 31 | Supla Espablo |
| 32 | Witty Cloud |
| 33 | Yunshan Relay |
| 34 | MagicHome |
| 35 | Luani HVIO |
| 36 | KMC 70011 |
| 37 | Arilux LC01 |
| 38 | Arilux LC11 |
| 39 | Sonoff Dual R2 | Process buttons as single press only
| 40 | Arilux LC06 |
| 41 | Sonoff S31 | Sets serial interface to 4800 baud and disable serial logging
| 42 | Zengge WF017 |
| 43 | Sonoff Pow R2 |
| 44 | Sonoff IFan02 | Enable command Fanspeed. Disable Interlock and PulseTime. Tune status information, MQTT data and GUI. Sync with microcontroller. Process Domoticz Fan state
| 45 | Blitzwolf SHP | Module specific power monitoring calibration
| 46 | Shelly 1 |
| 47 | Shelly 2 |
| 48 | Xiaomi Philips | Process Color Temperature using PWM2 and Intensity using PWM1
| 49 | Neo Coolcam |
| 50 | ESP SwitCh |
| 51 | Obi Socket |
| 52 | Teckin |
| 53 | APLIC WDP303075 |
| 54 | Tuya Dimmer | Enable and Process data via software or hardware serial interface using GPIO 148 and 149 or forced GPIO01 and GPIO03. Change baudrate to 9600 bps. Process all Buttons
| 55 | Gosund SP1 v23 |
| 56 | Armtronix Dimmers | Enable and Process data via software or hardware serial interface using GPIO 148 and 149. Change baudrate to 115200 bps.
| 57 | SK03 Outdoor (Tuya) |
| 58 | PS-16-DZ Dimmer | Enable and Process data via software or hardware serial interface using GPIO 148 and 149. Change baudrate to 19200 bps.
| 59 | Teckin_US |
| 60 | Manzoku Strip (Eu_4) |
| 61 | Obi Socket 2 |
| 62 | YTF IR Bridge | Disable serial interface to stop loopback
| 63 | Digoo DG-SP202 |
| 64 | KA10 |
| 65 | Luminea ZX2820 |
| 66 | Mi Desk Lamp | Process rotary and Button1 data specific to this device. *Requires `#define ROTARY_V1` in `my_user_config.h`**
| 67 | SP10 |
| 68 | WAGA CHCZ02MB |
| 69 | SYF05 |
<a id="SonoffBasic"> </a> 1 | Sonoff Basic |
<a id="SonoffRF"> </a> 2 | Sonoff RF |
<a id="SonoffSV"> </a> 3 | Sonoff SV |
<a id="SonoffTh"> </a> 4 | Sonoff TH |
<a id="SonoffDual"> </a> 5 | Sonoff Dual | Process relay and button via hardware serial interface using GPIO01 and GPIO03. Change baudrate to 19200 bps. Process buttons as single press only
<a id="SonoffPow"> </a> 6 | Sonoff POW |
<a id="Sonoff4Ch"> </a> 7 | Sonoff 4Ch |
<a id="SonoffS2X"> </a> 8 | Sonoff S2X |
<a id="Slampher"> </a> 9 | Slampher |
<a id="SonoffTouch"> </a> 10 | Sonoff Touch | Invert LedState 1 functionality
<a id="SonoffLED"> </a> 11 | Sonoff LED | Set light type to 2 PWM channels disregarding SetOption15. Fix device specific LED instabilities by disabling GPIO04, GPIO5 and GPIO14
<a id="1Channel"> </a> 12 | 1 Channel |
<a id="4Channel"> </a> 13 | 4 Channel | [See Sonoff Dual](#SonoffDual)
<a id="MotorC/AC"> </a> 14 | Motor C/AC | Force all relays ON at Power On and disable command PowerOnState
<a id="ElectroDragon"> </a> 15 | ElectroDragon |
<a id="EXSRelays"> </a> 16 | EXS Relay(s) | Enable pulse latching using even/odd numbered relay pairs
<a id="WION"> </a> 17 | WION |
<a id="Generic"> </a> 18 | Generic | Show Wemos specific pin information in GUI
<a id="SonoffDev"> </a> 19 | Sonoff Dev |
<a id="H801"> </a> 20 | H801 | Change hardware UART Tx from GPIO01 to GPIO02
<a id="SonoffSC"> </a> 21 | Sonoff SC | Enable and Process data via hardware serial interface using GPIO01 and GPIO03. Change baudrate to 19200 bps
<a id="SonoffBN-SZ"> </a> 22 | Sonoff BN-SZ | Set light type to 1 PWM channel disregarding SetOption15
<a id="Sonoff4ChPro"> </a> 23 | Sonoff 4Ch Pro | Button handling disregarding SetOption13 only allowing single press to enable RF learning while holding the button
<a id="HuafanSS"> </a> 24 | Huafan SS |
<a id="SonoffBridge"> </a> 25 | Sonoff Bridge | Enable and Process data via hardware serial interface using GPIO01 and GPIO03. Change baudrate to 19200 bps. Process 16 buttons in web GUI. Enable EFM8BB1 firmware upload
<a id="SonoffB1"> </a> 26 | Sonoff B1 | Set light type to RGBWC using MY92x1
<a id="Ailight"> </a> 27 | Ailight | Set light type to RGBW using MY92x1
<a id="SonoffT11Ch"> </a> 28 | Sonoff T1 1Ch | [See Sonoff Touch](#SonoffTouch)
<a id="SonoffT12Ch"> </a> 29 | Sonoff T1 2Ch | [See Sonoff Touch](#SonoffTouch)
<a id="SonoffT13Ch"> </a> 30 | Sonoff T1 3Ch | [See Sonoff Touch](#SonoffTouch)
<a id="SuplaEspablo"> </a> 31 | Supla Espablo |
<a id="WittyCloud"> </a> 32 | Witty Cloud |
<a id="YunshanRelay"> </a> 33 | Yunshan Relay |
<a id="MagicHome"> </a> 34 | MagicHome |
<a id="LuaniHVIO"> </a> 35 | Luani HVIO |
<a id="KMC70011"> </a> 36 | KMC 70011 |
<a id="AriluxLC01"> </a> 37 | Arilux LC01 |
<a id="AriluxLC11"> </a> 38 | Arilux LC11 |
<a id="SonoffDualR2"> </a> 39 | Sonoff Dual R2 | Process buttons as single press only
<a id="AriluxLC06"> </a> 40 | Arilux LC06 |
<a id="SonoffS31"> </a> 41 | Sonoff S31 | Selects GPIO types for the CSE7766 (serial connected energy monitoring chip) with Rx and Tx hardware serial (even parity) on GPIO01 and GPIO03 respectively. Sets serial interface to 4800 baud and disables serial logging
<a id="ZenggeWF017"> </a> 42 | Zengge WF017 |
<a id="SonoffPowR2"> </a> 43 | Sonoff Pow R2 |
<a id="SonoffIFan02"> </a> 44 | Sonoff IFan02 | Enable command Fanspeed. Disable Interlock and PulseTime. Tune status information, MQTT data and GUI. Sync with microcontroller. Process Domoticz Fan state
<a id="BlitzwolfSHP"> </a> 45 | Blitzwolf SHP | Module specific power monitoring calibration
<a id="Shelly1"> </a> 46 | Shelly 1 |
<a id="Shelly2"> </a> 47 | Shelly 2 |
<a id="XiaomiPhilips"> </a> 48 | Xiaomi Philips | Process Color Temperature using PWM2 and Intensity using PWM1
<a id="NeoCoolcam"> </a> 49 | Neo Coolcam |
<a id="ESPSwitCh"> </a> 50 | ESP SwitCh |
<a id="ObiSocket"> </a> 51 | Obi Socket |
<a id="Teckin"> </a> 52 | Teckin |
<a id="APLICWDP303075"> </a> 53 | APLIC WDP303075 |
<a id="TuyaDimmer"> </a> 54 | Tuya Dimmer | Enable and Process data via software or hardware serial interface using GPIO 148 and 149 or forced GPIO01 and GPIO03. Change baudrate to 9600 bps. Process all Buttons
<a id="GosundSP1v23"> </a> 55 | Gosund SP1 v23 |
<a id="ArmtronixDimmers"> </a> 56 | Armtronix Dimmers | Enable and Process data via software or hardware serial interface using GPIO 148 and 149. Change baudrate to 115200 bps.
<a id="SK03OutdoorTuya"> </a> 57 | SK03 Outdoor (Tuya) |
<a id="PS-16-DZ"> </a> 58 | PS-16-DZ | Enable and Process data via software or hardware serial interface using GPIO 148 and 149. Change baudrate to 19200 bps.
<a id="TeckinUS"> </a> 59 | Teckin US |
<a id="ManzokuStripEU_4"> </a> 60 | Manzoku Strip (EU 4) |
<a id="ObiSocket2"> </a> 61 | Obi Socket 2 |
<a id="YTFLRBridge"> </a> 62 | YTF LR Bridge | Disable serial interface to stop loopback
<a id="DigooDG-SP202"> </a> 63 | Digoo DG-SP202 |
<a id="KA10"> </a> 64 | KA10 |
<a id="LumineaZX2820"> </a> 65 | Luminea ZX2820 |
<a id="MiDeskLamp"> </a> 66 | Mi Desk Lamp | Process rotary and Button1 data specific to this device
<a id="SP10"> </a> 67 | SP10 |
<a id="WAGACHCZ02MB"> </a> 68 | WAGA CHCZ02MB |
<a id="SYF05"> </a> 69 | SYF05 |