mirror of https://github.com/arendst/Tasmota.git
Created Components (markdown)
blakadder
parent
284a3ad11d
commit
7e84000b02
|
|
@ -0,0 +1,176 @@
|
|||
**Component** is anything wired to the ESP8266 to be controlled by or send data to it.
|
||||
|
||||
Components can be: buttons, switches, relays, LEDs, sensors, displays, MCU units, etc. Every component is assigned to the ESP8266 GPIO it is wired (connected) to in the device template.
|
||||
|
||||
Every Tasmota device has components configured by default. Most often there is a relay, a button and a LED configured as is the case for a Sonoff Basic in the following image.
|
||||
|
||||
|
||||
|
||||
> GPIOs configured as User (255) are the GPIOs that can be configured in the Configure Module page. See image in adding components!
|
||||
|
||||
## Adding Components
|
||||
If you wish to expand a device with your own component, after properly wiring everything, you need to assign it to a free GPIO in **Configure Module** page or use command [`GPIO`](commands#gpio).
|
||||
|
||||
|
||||
|
||||
Read more about adding specific [sensors](supported-sensors) or adding components to a [Sonoff Basic](Expanding-Sonoffs).
|
||||
|
||||
### Components List
|
||||
| # | Name | Description |
|
||||
| --- | --- | ---
|
||||
| 1 | DHT11 | DHT11 sensor |
|
||||
| 2 | AM2301 | AM230X, DHT21 and DHT22 sensor |
|
||||
| 3 | SI7021 | Only for Sonoff Si7021, not the i2c version|
|
||||
| 4 | DS18x20 | Dallas Semiconductor DS18b20 1-Wire temperature sensor |
|
||||
| 5 | I2C SCL | I2C serial clock pin - used with any I2C component (sensors, displays, ...) |
|
||||
| 6 | I2C SDA | I2C serial data pin - used with any I2C component (sensors, displays, ...) |
|
||||
| 7 | WS2812 | Addressable LEDs such as WS281X or Neopixel |
|
||||
| 8 | IRsend | IR Transmitter LED |
|
||||
| 9 | Switch1 | Switch |
|
||||
| 10 | Switch2 | Switch |
|
||||
| 11 | Switch3 | Switch |
|
||||
| 12 | Switch4 | Switch |
|
||||
| 13 | Switch5 | Switch |
|
||||
| 14 | Switch6 | Switch |
|
||||
| 15 | Switch7 | Switch |
|
||||
| 16 | Switch8 | Switch |
|
||||
| 17 | Button1 | Button |
|
||||
| 18 | Button2 | Button |
|
||||
| 19 | Button3 | Button |
|
||||
| 20 | Button4 | Button |
|
||||
| 21 | Relay1 | Relay |
|
||||
| 22 | Relay2 | Relay |
|
||||
| 23 | Relay3 | Relay |
|
||||
| 24 | Relay4 | Relay |
|
||||
| 25 | Relay5 | Relay |
|
||||
| 26 | Relay6 | Relay |
|
||||
| 27 | Relay7 | Relay |
|
||||
| 28 | Relay8 | Relay |
|
||||
| 29 | Relay1i | Relay inverted |
|
||||
| 30 | Relay2i | Relay inverted |
|
||||
| 31 | Relay3i | Relay inverted |
|
||||
| 32 | Relay4i | Relay inverted |
|
||||
| 33 | Relay5i | Relay inverted |
|
||||
| 34 | Relay6i | Relay inverted |
|
||||
| 35 | Relay7i | Relay inverted |
|
||||
| 36 | Relay8i | Relay inverted |
|
||||
| 37 | PWM1 | Pulse Width Modulated Output |
|
||||
| 38 | PWM2 | Pulse Width Modulated Output |
|
||||
| 39 | PWM3 | Pulse Width Modulated Output |
|
||||
| 40 | PWM4 | Pulse Width Modulated Output |
|
||||
| 41 | PWM5 | Pulse Width Modulated Output |
|
||||
| 42 | Counter1 | Counter Input |
|
||||
| 43 | Counter2 | Counter Input |
|
||||
| 44 | Counter3 | Counter Input |
|
||||
| 45 | Counter4 | Counter Input |
|
||||
| 46 | PWM1i | Pulse Width Modulated inverted Output |
|
||||
| 47 | PWM2i | Pulse Width Modulated inverted Output |
|
||||
| 48 | PWM3i | Pulse Width Modulated inverted Output |
|
||||
| 49 | PWM4i | Pulse Width Modulated inverted Output |
|
||||
| 50 | PWM5i | Pulse Width Modulated inverted Output |
|
||||
| 51 | IRrecv | IR Receiver Input (for eample TSOP1838) |
|
||||
| 52 | Led1 | LED |
|
||||
| 53 | Led2 | LED |
|
||||
| 54 | Led3 | LED |
|
||||
| 55 | Led4 | LED |
|
||||
| 56 | Led1i | Inverted LED - default state ON |
|
||||
| 57 | Led2i | Inverted LED - default state ON |
|
||||
| 58 | Led3i | Inverted LED - default state ON |
|
||||
| 59 | Led4i | Inverted LED - default state ON |
|
||||
| 60 | MHZ Rx | MHZ 19 Co2 Sensor |
|
||||
| 61 | MHZ Tx | MHZ 19 Co2 Sensor |
|
||||
| 62 | PZEM0XX Tx | Peacefair Pzem-0XX Power Meter Tx pin |
|
||||
| 63 | PZEM004 Rx | Peacefair Pzem-004 Power Meter Rx pin |
|
||||
| 64 | SAir Rx | Sensor Senseair |
|
||||
| 65 | SAir Tx | Sensor Senseair |
|
||||
| 66 | SPI CS | SPI Interface (ePaper Display) |
|
||||
| 67 | SPI DC | SPI Interface (ePaper Display) |
|
||||
| 68 | BkLight | Backlight (Display) |
|
||||
| 69 | PMS5003 | PMS5003 Air Quality Sensor |
|
||||
| 70 | SDS0X1 Rx | Nova Fitness SDS011 Laser Dust Sensor Rx pin |
|
||||
| 71 | SerBr Rx | Serial Bridge Receive |
|
||||
| 72 | SerBr Tx | Serial Bridge Transmit |
|
||||
| 73 | SR04 Tri | Ultrasonic Sensor HC-SR04 Trigger pin |
|
||||
| 74 | SR04 Ech | Ultrasonic Sensor HC-SR04 Echo pin |
|
||||
| 75 | SDMx20 Tx | SDMx20-Modbus Mutlifunction Power Analyser Tx pin |
|
||||
| 76 | SDMx20 Rx | SDMx20-Modbus Mutlifunction Power Analyser Rx pin |
|
||||
| 77 | SDM630 Tx | SDM630-Modbus Mutlifunction Power Analyser Tx pin |
|
||||
| 78 | SDM630 Rx | SDM630-Modbus Mutlifunction Power Analyser Rx pin |
|
||||
| 79 | TM16 CLK | TM1638 Switch Modul |
|
||||
| 80 | TM16 DIO | TM1638 Switch Modul |
|
||||
| 81 | TM16 STB | TM1638 Switch Modul |
|
||||
| 82 | Switch1n | Switch, no pullup resistor |
|
||||
| 83 | Switch2n | Switch, no pullup resistor |
|
||||
| 84 | Switch3n | Switch, no pullup resistor |
|
||||
| 85 | Switch4n | Switch, no pullup resistor |
|
||||
| 86 | Switch5n | Switch, no pullup resistor |
|
||||
| 87 | Switch6n | Switch, no pullup resistor |
|
||||
| 88 | Switch7n | Switch, no pullup resistor |
|
||||
| 89 | Switch8n | Switch, no pullup resistor |
|
||||
| 90 | Button1n | Button, no pullup resistor |
|
||||
| 91 | Button2n | Button, no pullup resistor |
|
||||
| 92 | Button3n | Button, no pullup resistor |
|
||||
| 93 | Button4n | Button, no pullup resistor |
|
||||
| 94 | Counter1n | Counter sensor, no pullup resistor |
|
||||
| 95 | Counter2n | Counter sensor, no pullup resistor |
|
||||
| 96 | Counter3n | Counter sensor, no pullup resistor |
|
||||
| 97 | Counter4n | Counter sensor, no pullup resistor |
|
||||
| 98 | PZEM016 Rx | Peacefair Pzem-016 Power Meter Rx pin |
|
||||
| 99 | PZEM017 Rx | Peacefair Pzem-017 Power Meter Rx pin |
|
||||
| 100 | MP3 Player | DF MP3 Player mini (Input) |
|
||||
| 101 | SDS0X1 Tx | Nova Fitness SDS011 Laser Dust Sensor Tx pin |
|
||||
| 102 | HX711 SCK | HX711 weight sensor serial clock input |
|
||||
| 103 | HX711 DAT | HX711 weight sensor data output |
|
||||
| 104 | TX20 | TX20 Wind Sensor (DTR or TxD?) |
|
||||
| 105 | RFSend | RF Emitter (433Mhz module needed) |
|
||||
| 106 | RFrecv | RF Receiver (433Mhz module needed) |
|
||||
| 107 | Tuya Tx | Tuya Transfer pin |
|
||||
| 108 | Tuya Rx | Tuya Receive pin |
|
||||
| 109 | MGC3130 Xfr | MGC3130 E-field Xfr pin |
|
||||
| 110 | MGC3130 Rst | MGC3130 E-field Reset pin |
|
||||
| 111 | SSPI MISO | Software SPI MISO (Display) |
|
||||
| 112 | SSPI MOSI | Software SPI MOSI (Display) |
|
||||
| 113 | SSPI SCLK | Software SPI SCLK (Display) |
|
||||
| 114 | SSPI CS | Software SPI CS (Display) |
|
||||
| 115 | SSPI DC | Software SPI DC (Display) |
|
||||
| 116 | RF Sensor | Theo Arendst RF433 Sensor |
|
||||
| 117 | AZ Rx | AZ 7798 CO2 datalogger |
|
||||
| 118 | AZ Tx | AZ 7798 CO2 datalogger |
|
||||
| 119 | MX31855 CS | MAX31855 Thermocouple Sensor Chip Select pin |
|
||||
| 120 | MX31855 CLK | MAX31855 Thermocouple Sensor Serial Clock pin |
|
||||
| 121 | MX31855 DO | MAX31855 Thermocouple Sensor Digital Output pin |
|
||||
| 122 | Button1i | Button inverted |
|
||||
| 123 | Button2i | Button inverted |
|
||||
| 124 | Button3i | Button inverted |
|
||||
| 125 | Button4i | Button inverted |
|
||||
| 126 | Button1in | Button inverted, no pullup resistor |
|
||||
| 127 | Button2in | Button inverted, no pullup resistor |
|
||||
| 128 | Button3in | Button inverted, no pullup resistor |
|
||||
| 129 | Button4in | Button inverted, no pullup resistor |
|
||||
| 130 | HLWBL SEL | Energy Monitoring (for example Pow) |
|
||||
| 131 | HLWBL SELi | Energy Monitoring (for example Pow) |
|
||||
| 132 | HLWBL CF1 | Energy Monitoring (for example Pow) |
|
||||
| 133 | HLW8012 CF | HLW8012 Single Phase Energy Monitor Chip CF pin |
|
||||
| 134 | BL0937 CF | BL0937 Single Phase Energy Monitor Chip CF pin |
|
||||
| 135 | MCP39F5 Tx | Energy Monitoring (for example Shelly2) |
|
||||
| 136 | MCP39F5 Rx | Energy Monitoring (for example Shelly2) |
|
||||
| 137 | MCP39F5 Rst | Energy Monitoring (for example Shelly2) |
|
||||
| 138 | PN532 Tx | PN532 RFID/NFC Reader Tx pin |
|
||||
| 139 | PN532 Rx | PN532 RFID/NFC Reader Rx pin |
|
||||
| 140 | SM16716 CLK | SM16716 Pixel LED Serial Clock pin |
|
||||
| 141 | SM16716 DAT | SM16716 Pixel LED Data pin |
|
||||
| 142 | SM16716 PWR | SM16716 Pixel LED Power pin |
|
||||
| 143 | MY92x1 DI | Light Bulb with MY92x controller |
|
||||
| 144 | MY92x1 DCKI | Light Bulb with MY92x controller |
|
||||
| 145 | CSE7766 Tx | CSE7766 Single Phase Energy Monitor Chip Tx pin |
|
||||
| 146 | CSE7766 Rx | CSE7766 Single Phase Energy Monitor Chip Rx pin |
|
||||
| 147 | ALux IrRcv | AriLux RGB Controller IR receive (Input) |
|
||||
| 148 | Serial Tx | Serial Transfer pin |
|
||||
| 149 | Serial Rx | Serial Receive pin |
|
||||
| 150 | Rotary1a | Rotary Encoder (Mi Desk Lamp) |
|
||||
| 151 | Rotary1b | Rotary Encoder (Mi Desk Lamp) |
|
||||
| 152 | Rotary1c | Rotary Encoder (Mi Desk Lamp) |
|
||||
| 153 | Rotary1d | Rotary Encoder (Mi Desk Lamp) |
|
||||
| 157 | LedLink | Device Status LED |
|
||||
| 158 | LedLinki | Device Status LED, inverted |
|
||||
| 159 | ALux IrSel | For AriLux devices - switches between IR/RF mode |
|
||||
Loading…
Reference in New Issue