Buzzer 0

Commands.md

@@ -108,7 +108,7 @@ Backlog<a id="Backlog"></a>|List of commands to be executed in sequence separate
 BlinkCount<a id="BlinkCount"></a>|Number of relay toggles ([blinks](#power)) **(does not control the status LED)**<BR> `0` = blink many times before restoring power state <BR> `1..32000` = set number of blinks *(default = `10`)*
 BlinkTime<a id="BlinkTime"></a>|`2..3600` set duration, in 0.1 second increments, to [blink](#power) (i.e., toggle Power) for a relay **(does not control the status LED)**
 ButtonDebounce<a id="ButtonDebounce"></a>|**6.2.0**<BR>User control over button debounce timing <BR>`40..1000` = set button debounce time in milliseconds *(default = `50`)*
-Buzzer<a id="Buzzer"></a>|**6.6.0.4**<BR>`<count>,<beep>,<silence>,<tune>`<BR>All parameters are optional. The default is one 100 millisecond beep (`1` for `<count>`, `<beep>`, and `<silence>`).<BR>The `<tune >` parameter is a 32-bit [bitmask](https://en.wikipedia.org/wiki/Mask_(computing)#Masking_bits_to_1) where a `1` bit beeps and a `0` bit is silence according to the `<beep>` and `<silence>` duration parameters, respectively. The tune is played from most significant bit (MSB) to least significant bit (LSB). Leading and trailing `0` bits are ignored. If the `<tune>` parameter is specified, the `<count>` parameter is ignored. If the `<tune>` parameter is `0`, it is ignored.<BR><BR>`3` - Beep three times with 100 milliseconds duration and 100 milliseconds pause<BR>`2,3` - Beep twice with 300 milliseconds duration and 100 milliseconds pause<BR>`2,3,4` - Beep twice with 300 milliseconds duration and 400 milliseconds pause<BR>`1,2,3,0xF54` (0000 0000 0000 0000 0000 1111 0101 0100). Each `1` bit beeps for 200 milliseconds and each bounded `0` bit pauses for 300 milliseconds<BR>A device LED can be assigned as a `Buzzer` component to display a blink pattern.
+Buzzer<a id="Buzzer"></a>|**6.6.0.18**<BR>`0` = stop active buzzer cycle<BR>**6.6.0.4**<BR>`<count>,<beep>,<silence>,<tune>`<BR>All parameters are optional. The default is one 100 millisecond beep (`1` for `<count>`, `<beep>`, and `<silence>`).<BR>The `<tune >` parameter is a 32-bit [bitmask](https://en.wikipedia.org/wiki/Mask_(computing)#Masking_bits_to_1) where a `1` bit beeps and a `0` bit is silence according to the `<beep>` and `<silence>` duration parameters, respectively. The tune is played from most significant bit (MSB) to least significant bit (LSB). Leading and trailing `0` bits are ignored. If the `<tune>` parameter is specified, the `<count>` parameter is ignored. If the `<tune>` parameter is `0`, it is ignored.<BR><BR>`3` - Beep three times with 100 milliseconds duration and 100 milliseconds pause<BR>`2,3` - Beep twice with 300 milliseconds duration and 100 milliseconds pause<BR>`2,3,4` - Beep twice with 300 milliseconds duration and 400 milliseconds pause<BR>`1,2,3,0xF54` (0000 0000 0000 0000 0000 1111 0101 0100). Each `1` bit beeps for 200 milliseconds and each bounded `0` bit pauses for 300 milliseconds<BR>A device LED can be assigned as a `Buzzer` component to display a blink pattern.
 FanSpeed<a id="FanSpeed"></a>|**6.1.0**<BR>Fan speed control *(iFan02/iFan03 only)*<BR>`0` = turn fan OFF<BR>`1..3` = set fan speed<BR>`+` = increase fan speed <BR>`-` = decrease fan speed <BR>
 Interlock<a id="Interlock"></a>|**6.5.0**<BR>Relay interlock mode and group selection.<BR>`0` = disable relay interlock for all relays (i.e., each relay is self-locking) *(default)*<BR> `1` = set interlock mode for selected relays
 ||Add up to 8 relays in 1 to 4 interlock groups, each separated by a space. For example<BR> `1,2 3,4` = Group Relay1 and Relay2 in group 1 and Relay3 and Relay4 in group 2 (_note the space between the two group declarations_) <BR> `1,2,3` = group Relay1, Relay2 and Relay3 in a single interlock group <BR>`1 3 2,4` = Relay1 is in group 1, Relay3 in group 2, Relay2 and Relay4 in group 3