Updated Sonoff iFan03 (markdown)

2019-08-27 00:08:37 -04:00 · 2019-08-27 00:08:37 -04:00 · 920ff5688a
parent d3c2f3d763
commit 920ff5688a
1 changed files with 82 additions and 1 deletions
--- a/Sonoff-iFan03.md
+++ b/Sonoff-iFan03.md
@ -40,3 +40,84 @@ To pair the remote hold down any button on the remote and apply power to the iFa
 ## Incorrect Fan Speed for US based Ceiling Fans

 To correct the fan speeds for US based ceiling fans you need to remove the existing capacitors from the iFan03 (see picture 3 above) and replace them with equivalently electrically rated 5uF (microfarad) capacitors. **Do NOT do this if you are not comfortable using a soldering iron as improperly performing this action could increase the risk of bodily injury or property damage**
+
+### HomeAssistant MQTT Fan config
+
+Credit to [finity](https://community.home-assistant.io/t/sonoff-ifan02-tasmota-mqtt-fan/64083/13)
+
+There are two different configurations that need to be used depending on the method of use in Home Assistant.
+
+To use the iFan03 along with the [Fan Control Entity Row](https://github.com/finity69x2/fan-control-entity-row) then use the configuration below:
+
+```
+  - platform: mqtt  
+    name: "iFan03-2 Test Fan"
+    command_topic: "cmnd/iFan03-2/FanSpeed"
+    speed_command_topic: "cmnd/iFan03-2/FanSpeed"    
+    state_topic: "stat/iFan03-2/RESULT"
+    speed_state_topic: "stat/iFan03-2/RESULT"
+    state_value_template: >
+      {% if value_json.FanSpeed is defined %}
+        {% if value_json.FanSpeed == 0 -%}0{%- elif value_json.FanSpeed > 0 -%}4{%- endif %}
+      {% else %}
+        {% if states.fan.ifan03_2_test_fan.state == 'off' -%}0{%- elif states.fan.ifan03_2_test_fan.state == 'on' -%}4{%- endif %}
+      {% endif %}
+    speed_value_template: "{{ value_json.FanSpeed }}"
+    availability_topic: tele/iFan03-2/LWT
+    payload_off: "0"
+    payload_on: "4"
+    payload_low_speed: "1"
+    payload_medium_speed: "2"
+    payload_high_speed: "3"
+    payload_available: Online
+    payload_not_available: Offline
+    speeds:
+      - off
+      - low
+      - medium
+      - high
+```
+
+If you will not be using the Fan Control Row and will be using the regular toggle to control off & on and using the pop up "more info" window to control the speeds then use this configuration:
+
+```
+  - platform: mqtt  
+    name: "iFan03-2 Test Fan Popup"
+    command_topic: "cmnd/iFan03-2/FanSpeed"
+    speed_command_topic: "cmnd/iFan03-2/FanSpeed"    
+    state_topic: "stat/iFan03-2/RESULT"
+    speed_state_topic: "stat/iFan03-2/RESULT"
+    state_value_template: >
+      {% if value_json.FanSpeed is defined %}
+        {% if value_json.FanSpeed == 0 -%}0{%- elif value_json.FanSpeed > 0 -%}ON{%- endif %}
+      {% else %}
+        {% if states.fan.ifan03_2_test_fan_popup.state == 'off' -%}0{%- elif states.fan.ifan03_2_test_fan_popup.state == 'on' -%}ON{%- endif %}
+      {% endif %}
+    speed_value_template: "{{ value_json.FanSpeed }}"
+    availability_topic: tele/iFan03-2/LWT
+    payload_off: "0"
+    payload_on: "ON"
+    payload_low_speed: "1"
+    payload_medium_speed: "2"
+    payload_high_speed: "3"
+    payload_available: Online
+    payload_not_available: Offline
+    speeds:
+      - off
+      - low
+      - medium
+      - high
+```
+
+### HomeAssistant MQTT switch config for fan light
+
+```
+  - platform: mqtt
+    name: "iFan03-2 Light"
+    command_topic: "cmnd/iFan03-2/power1"
+    state_topic: "stat/iFan03-2/POWER1"
+    qos: 1
+    payload_on: "ON"
+    payload_off: "OFF"
+    retain: false
+```