mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Updated LC Technology WiFi Relay (markdown)

Michael Ingraham 2019-10-07 16:35:56 -04:00
parent fa91b0c22c
commit 96e83b5e76
1 changed files with 46 additions and 24 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

70
LC-Technology-WiFi-Relay.md

@ -1,16 +1,25 @@
## LC Technology WiFi Relay - Single Relay ## LC Technology WiFi Relay - Single Relay
In order to use LC Technology WiFi Relay for 1 relay version, please The LC Technology relay devices use GPIO1 and GPIO3 for the serial communications used to control the relays. You do not need to specify these in the template. `SerialSend` uses these standard serial communications GPIO by default.
In order to use LC Technology WiFi Relay for 1 relay version:
* Set module to Generic (in module configuration and click save) * Set module to Generic (in module configuration and click save)
* Set i.e. GPIO12 as Relay1 (in module configuration and click save) * Set GPIO12 as Relay1 (in module configuration and click save)
* Disable seriallog (type ``seriallog 0`` in the tasmota console) * Disable SerialLog (type `seriallog 0` in the Tasmota console)
* Enable rules (type ``rule1 1`` in the tasmota console)
* Add the following rules typing in the console: * Add the following rules typing in the console:
``Rule1 on System#Boot do Baudrate 9600 endon on Power1#State=1 do SerialSend5 A00101A2 endon on Power1#State=0 do SerialSend5 A00100A1 endon`` ```
* Note: If that doesn't work for you, you may find that using Power1#Boot as the event to trigger the baudrate setting (instead of System#Boot) works, as it did for me. So the alternate rule one command is.. Rule1
``on Power1#Boot do Baudrate 9600 endon on Power1#State=1 do SerialSend5 A00101A2 endon on Power1#State=0 do SerialSend5 A00100A1 endon`` on System#Boot do Backlog Baudrate 9600; SerialSend5 0 endon
on Power1#State=1 do SerialSend5 A00101A2 endon
on Power1#State=0 do SerialSend5 A00100A1 endon
```
* Enable the rule (type `rule1 1` in the Tasmota console)
* Note: If that doesn't work for you, you may find that using `Power1#Boot` as the event to trigger the baud rate setting (instead of `System#Boot`) works, as it did for me. So the alternate rule is:
```
on Power1#Boot do Backlog Baudrate 9600; SerialSend5 0 endon
on Power1#State=1 do SerialSend5 A00101A2 endon
on Power1#State=0 do SerialSend5 A00100A1 endon
```
## LC Technology WiFi Relay - Dual Relay (note, older versions of this board used a baud rate of 9600, so if 115200 doesn't work, try 9600) ## LC Technology WiFi Relay - Dual Relay (note, older versions of this board used a baud rate of 9600, so if 115200 doesn't work, try 9600)
@ -18,26 +27,39 @@ To configure an LC Technology ESP8266 Relay X2, use the following settings...
* Set module to Generic (in module configuration and click save) * Set module to Generic (in module configuration and click save)
* Set GPIO0 and GPIO2 as Relay1 and Relay 2 (in module configuration and click save) * Set GPIO0 and GPIO2 as Relay1 and Relay 2 (in module configuration and click save)
* Disable seriallog (type ``seriallog 0`` in the tasmota console) * Disable SerialLog (type ``seriallog 0`` in the Tasmota console)
* Enable rule1 (type ``rule1 1`` in the tasmota console) * Add the following rules typing in the Tasmota console:
* Enable rule2 (type ``rule2 1`` in the tasmota console) ```
* Add the following rules typing in the console: Rule1
on System#Boot do Backlog Baudrate 9600; SerialSend5 0 endon
``Rule1 on System#Boot do Baudrate 9600 endon on Power1#State=1 do SerialSend5 A00101A2 endon on Power1#State=0 do SerialSend5 A00100A1 endon`` on Power1#State=1 do SerialSend5 A00101A2 endon
on Power1#State=0 do SerialSend5 A00100A1 endon
``Rule2 on Power2#State=1 do SerialSend5 A00201A3 endon on Power2#State=0 do SerialSend5 A00200A2 endon`` on Power2#State=1 do SerialSend5 A00201A3 endon
on Power2#State=0 do SerialSend5 A00200A2 endon
```
* Enable the rule (type `rule1 1` in the Tasmota console)
## LC Technology WiFi Relay - Quad Relay (note, older versions of this board used a baud rate of 9600, so if 115200 doesn't work, try 9600) ## LC Technology WiFi Relay - Quad Relay (note, older versions of this board used a baud rate of 9600, so if 115200 doesn't work, try 9600)
In configuration open `Configure Other` paste this template and select activate In configuration open `Configure Other` paste this template and select activate
``{"NAME":"LC Technology 4CH Relay","GPIO":[52,255,17,255,255,255,255,255,21,22,23,24,255],"FLAG":0,"BASE":18}`` `{"NAME":"LC Technology 4CH Relay","GPIO":[52,255,17,255,255,255,255,255,21,22,23,24,255],"FLAG":0,"BASE":18}`
Enable rule1 (type ``rule1 1`` in the tasmota console) Enter this command in console (configure the 1st rule)
Run this command in console (configure the 1st rule) ```
``Rule1 on Power1#State=1 do SerialSend5 A00101A2 endon on Power1#State=0 do SerialSend5 A00100A1 endon on Power2#State=1 do SerialSend5 A00201A3 endon on Power2#State=0 do SerialSend5 A00200A2 endon on Power3#State=1 do SerialSend5 A00301A4 endon on Power3#State=0 do SerialSend5 A00300A3 endon on Power4#State=1 do SerialSend5 A00401A5 endon on Power4#State=0 do SerialSend5 A00400A4 endon`` Rule1
on System#Boot do Backlog Baudrate 9600; SerialSend5 0 endon
on Power1#State=1 do SerialSend5 A00101A2 endon
on Power1#State=0 do SerialSend5 A00100A1 endon
on Power2#State=1 do SerialSend5 A00201A3 endon
on Power2#State=0 do SerialSend5 A00200A2 endon
on Power3#State=1 do SerialSend5 A00301A4 endon
on Power3#State=0 do SerialSend5 A00300A3 endon
on Power4#State=1 do SerialSend5 A00401A5 endon
on Power4#State=0 do SerialSend5 A00400A4 endon
```
Enable the rule (type `rule1 1` in the Tasmota console)
## Beware of counterfeit modules ## Beware of counterfeit modules
If your board just [continuously flashes its led when powered on](https://www.youtube.com/watch?v=5Le9kNT_Bm4) and no esp-01 is entered, the onboard STC15F104W needs to be programmed! If your board just [continuously flashes its led when powered on](https://www.youtube.com/watch?v=5Le9kNT_Bm4) and no esp-01 is entered, the onboard STC15F104W needs to be programmed! For more details ([link](https://www.esp8266.com/viewtopic.php?f=160&t=13164&start=68#p74262))
For more details see https://www.esp8266.com/viewtopic.php?f=160&t=13164&start=68#p74262
Additionally once programmed, you may also have to remove r4, some issues exist where r3 and r4 are swapped, but just removing r4 works. Additionally, once programmed, you may also have to remove r4. Some issues exist where r3 and r4 are swapped, but just removing r4 works.