mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Added Zigbee commands

s-hadinger 2019-10-12 11:13:48 +02:00
parent d71272122b
commit 9e5c3aa076
1 changed files with 12 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
Zigbee.md

@ -326,6 +326,18 @@ ZIG: zigbee device ready, listening...
## Using Z2T
### Z2T Commands
Here are the additional commands available when Zigbee is activated. Note: Zigbee will automatically boot the CC2530 device, configure it and wait for Zigbee messages.
|Command|Paramaters|
|---|---|
|ZigbeePermitJoin|Enables or disables pairing of new devices, see below.<BR><BR>Ex: `ZigbeePermitjoin 1` allows pairing of new devices for 1 minute|
|ZigbeeReset|Does a full reset and reconfiguration of the CC2530. Warning: you will need to re-pair all Zigbee devices<BR><BR>Ex: `ZigbeeReset 1`|
|ZigbeeStatus|Shows data collected from connected Zigbee devices, see examples below.<BR><BR>`ZigbeeStatus` shows the list of all Zigbee devices seen on the network until last boot, with their short address and friendly name.<BR>`ZigbeeStatus 1` adds Manufacturer ID and Model ID of each devices<BR>`ZigbeeStatus 2` adds list of endpoints of each device and the clusterIds supported in each endpoint.|
|ZigbeeZCLSend|Send a raw ZCL message to a Zigbee device. This is a low-level command, and requires to manually build the ZCL parameters. Most common usage will be provided as high-level functions.|
### Z2T Status
You can inspect the log output to determine whether Z2T started correctly. Z2T sends several `ZigbeeStatus` messages to inform the MQTT host about initialization:
Ex: ```{"ZigbeeStatus":{"Status":1,"Message":"CC2530 booted","RestartReason":"Watchdog","MajorRel":2,"MinorRel":6}}```