mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Created Teckin sp10 (markdown)

Rob 2018-11-25 01:45:43 -08:00
parent e6e5be78a6
commit 9f91fa631a
1 changed files with 63 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

63
Teckin-sp10.md Normal file

@ -0,0 +1,63 @@
so I got a couple of these guys given to me
![](https://images-na.ssl-images-amazon.com/images/I/51mTgHIhufL._SL1001_.jpg)
[teckin sp10 on amazon.ca](https://www.amazon.ca/dp/B07FQMVW45/?coliid=IFFUFMWD4KEHL&colid=RXUNLV481TPQ&psc=0&ref_=lv_ov_lig_dp_it)
follow some great info here
I found the esp8266 as expected in here I was able to identify the module at a esp8266-s3
[spec sheet](https://fccid.io/2AKBPESP8266-S3/User-Manual/User-Manual-3594791.html)
@znanev did most of the work already
[the uk version of this plug as noted by Znanev](https://github.com/arendst/Sonoff-Tasmota/wiki/Hyleton-313-Smart-Plug)
it took a great deal of time to confirm that I did indeed have the same pin outs as this UK plug
I stumbled apon what I think is the original manufacturer of these but we will probably never know
[plug maker](http://en.hysiry.com/)
![](http://www.bobcat.ca/stuff/PICS/sp10/20181124_172106.jpg)
![](http://www.bobcat.ca/stuff/PICS/sp10/20181125_003621.jpg)
![](http://www.bobcat.ca/stuff/PICS/sp10/20181124_192606.jpg)
I am going to now shamelessly steal from @znanev as he wrote this much better than I could have
## WiFi module pins
Here is a close-up view of the module's pins as seen from the bottom of the main PCB:
![pcb-bottom-module-pins](https://znanev.github.io/images/hyleton-313/pcb-bottom-module-pins.jpg "module pins")
And this is how module pins numbers are mapped (I had to desolder the module looking for labels when I tried to identify it):
![module-pins-numbered](https://znanev.github.io/images/hyleton-313/module-pins-numbered.jpg "module pins")
Failed to identify the module, I had remove the metal shielding cap to find the routing of the ESP8266's pins, so I grabbed the multimeter and soon I had the following table:
|Module pin |ESP8266 pin|Pin name || Pin name |ESP8266 pin|Module pin|
|:---------:|:---------:|-------------|---|------------|:---------:|:--------:|
|**1** |7 |Chip Enable ||Tout (ADC) |6 |**2** |
|**3** |9 |MTMS / GPIO14 ||MTDI / GPIO12 |10 |**4** |
|**5** |12 |MTCK / GPIO13 ||MTDO / GPIO15 |13 |**6** |
|**7** |15 |GPIO0 ||GPIO2 |14 |**8** |
|**9** |16 |GPIO4 ||GPIO5 |24 |**10** |
|**11** |25 |U0RXD ||U0TXD |26 |**12** |
|**13** |*Vdd* |- ||- |*GND* |**14** |
## Serial Connection
For programming you need to solder 4 jumper wires to pins *11*, *12*, *13* and *14* (*Rx*, *Tx*, *Vdd* and *GND*). Connect the other end of the wires to your USB-to-serial adapter and make sure the supply voltage selected is 3.3V. Shorting pin *7* (GPIO0) to ground while plugging the serial adapter into the computer's USB port will bring the module into UART firmware upload mode.
## Configuration
Once *Sonoff-Tasmota*'s WebUI configuration interface is loaded in the browser, you can change many settings using the menu options. Console window is where you can change almost all configuration parameters.
Head straight to the *Configure Module* menu, selected *'Generic'* for *'Module type'*. Here are the settings that I selected on that screen:
![tasmota-generic-configuration](https://znanev.github.io/images/hyleton-313/tasmota-generic-configuration.jpg "Tasmota Generic configuration")
*Sonoff* devices usually have a bi-colour LED, but just one of the colours can be controlled directly. The other colour is usually tied together with the relay, so it cannot be controlled independently. I think that is the reason why the *Sonoff-Tasmota* firmware by default controls just *Led1* when a single relay is configured. In the configuration above, only the blue LED will be used (tied to *GPIO2*). But if you prefer the red LED, just change the values for *Led1i* and *Led2i* (select *Led1i* for *GPIO0* and *Led2i* for *GPIO2*).
end quote
if you care led 2 is blue and led 1 is red
I flashed the standard sonoff.bin file to it with out any problems with both the esptools and with arduino
the one benefit to using arduino is that I was able to configure my wifi in advance
I hope to update this and clean it up but I thought I should get it up here as I found nothing about this plug before I forget to post and I can't remember any details