mirror of https://github.com/arendst/Tasmota.git
Updated Sonoff 4CH and 4CH Pro (markdown)
parent
513474e529
commit
a2f3c7869a
|
@ -33,7 +33,7 @@ As always, you need to access the serial interface. The **four serial pins** (3V
|
||||||
|
|
||||||
The Sonoff 4CH features four hardware buttons of which one is already connected to GPIO0, which hence can be used to bring the module into [Programming Mode](Hardware-Preparation#bringing-the-module-in-flash-mode). The button is shown on the second picture.
|
The Sonoff 4CH features four hardware buttons of which one is already connected to GPIO0, which hence can be used to bring the module into [Programming Mode](Hardware-Preparation#bringing-the-module-in-flash-mode). The button is shown on the second picture.
|
||||||
|
|
||||||
The "Sonoff 4CH R2 V1.0" can be flashed using the FTDI 232-1 USB to serial converter. The Rx and Tx pins are correctly labelled. The button labelled IO0 does put the module in flash mode.
|
The "Sonoff 4CH **R2** V1.0" can be flashed using the FTDI 232-1 USB to serial converter. The Rx and Tx pins are correctly labelled. The button labelled IO0 does put the module in flash mode.
|
||||||
|
|
||||||
### Sonoff 4CH Pro
|
### Sonoff 4CH Pro
|
||||||
|
|
||||||
|
|
Loading…
Reference in New Issue