Updated Sonoff T1 UK, EU, and US (markdown)

Maurice Meyer 2019-05-01 14:31:57 +02:00
parent 20f71a0898
commit a4c3442376
1 changed files with 1 additions and 1 deletions

@ -151,7 +151,7 @@ DO NOT attempt to power the device from your programmer when connected to the re
For most devices, the UK version flashing guide may be working. However, for at least the 2 Channel board version 1.0, you need to solder (or otherwise permanently connect) GPIO0 (R19) permanently to GND before powering the board and only disconnect them once the flashing is complete. For most devices, the UK version flashing guide may be working. However, for at least the 2 Channel board version 1.0, you need to solder (or otherwise permanently connect) GPIO0 (R19) permanently to GND before powering the board and only disconnect them once the flashing is complete.
![Sonoff T1 R2 EU board V1.0](https://imgur.com/a/KDomml4) ![Sonoff T1 R2 EU board V1.0](https://i.imgur.com/bI9f5sa.jpg)
After having connected GPIO0 and GND, power the board - it will boot directly to flashing mode. Flash your firmware and disconnect the board. After having connected GPIO0 and GND, power the board - it will boot directly to flashing mode. Flash your firmware and disconnect the board.