mirror of https://github.com/arendst/Tasmota.git
Updated Sonoff 4CH Pro (markdown)
parent
c9894d9546
commit
a8ee9f263f
|
@ -27,7 +27,7 @@ On the R2 module the GPIO0 pin is broken out to [a small pad to the right of the
|
||||||
If you have problems to program the 4CH Pro, you might find below tips useful:
|
If you have problems to program the 4CH Pro, you might find below tips useful:
|
||||||
* Use the ESP program header and ensure that the right port is set in the Arduino IDE.
|
* Use the ESP program header and ensure that the right port is set in the Arduino IDE.
|
||||||
* TX/RX are printed correctly on the pro version => TX goes to RX PIN and RX to TX.
|
* TX/RX are printed correctly on the pro version => TX goes to RX PIN and RX to TX.
|
||||||
* GPIO0 needs to be connected to ground for 3 seconds after reboot! If not you can not program it.
|
* GPIO0 needs to be connected to ground the first 3 seconds during reboot (or longer)! If not you can not program it.
|
||||||
|
|
||||||
1. If you use Windows7+, check in the device manager if the port is not added/removed all 2 seconds.
|
1. If you use Windows7+, check in the device manager if the port is not added/removed all 2 seconds.
|
||||||
- If yes then your USB port does not deliver enough ampere.
|
- If yes then your USB port does not deliver enough ampere.
|
||||||
|
@ -35,6 +35,9 @@ If you have problems to program the 4CH Pro, you might find below tips useful:
|
||||||
3. Use an active USB HUB if your computer delivers not enough ampere
|
3. Use an active USB HUB if your computer delivers not enough ampere
|
||||||
- External power source will stabilize the 4CH-pro and you can increase upload speed back to 115200.
|
- External power source will stabilize the 4CH-pro and you can increase upload speed back to 115200.
|
||||||
- Using a Laptop instead of a Desktop Tower might also do the trick as Laptops have a battery to deliver more ampere.
|
- Using a Laptop instead of a Desktop Tower might also do the trick as Laptops have a battery to deliver more ampere.
|
||||||
|
4. you can not flash it with sonoff-minimal.bin, you need to flash it with sonoff.bin ! Using esptool following commands might be usefull (you need to change com port)
|
||||||
|
to clear: esptool.exe -cp COM6 -cb 115200 -ce -v
|
||||||
|
to program: esptool.exe -cp COM6 -bm dout -cf sonoff.bin -v
|
||||||
|
|
||||||
## 4CH Pro DIPSwitch Configuration
|
## 4CH Pro DIPSwitch Configuration
|
||||||
|
|
||||||
|
|
Loading…
Reference in New Issue