mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Updated MagicHome with ESP8285 (markdown)

Def3nder 2019-05-10 17:46:22 +02:00
parent cbcc024fdc
commit ae2481c827
1 changed files with 54 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

62
MagicHome-with-ESP8285.md

@ -8,7 +8,7 @@ Aside from it going 9-28v, there are no other external model numbers etc, howeve
## Identifying this board ## Identifying this board
Looking closely you can see it's an ESP8285, on the main board, it has the part number: `ZJ-WFMN-B V1.1` Looking closely you can see it's an ESP8285, on the main board, it has the part number: `ZJ-WFMN-B V1.1` or `ZJ-WFMN-A V1.1`
<img width="40%" src="https://user-images.githubusercontent.com/816454/43895058-6fcb4e10-9c17-11e8-8c9c-b99c57a39c55.jpg" alt="board top 1"> <img width="40%" src="https://user-images.githubusercontent.com/816454/43895058-6fcb4e10-9c17-11e8-8c9c-b99c57a39c55.jpg" alt="board top 1">
<img width="40%" src="https://user-images.githubusercontent.com/816454/43895059-6ffdd7b8-9c17-11e8-994e-aeb8f65f47ef.jpg" alt="board top 2"> <img width="40%" src="https://user-images.githubusercontent.com/816454/43895059-6ffdd7b8-9c17-11e8-994e-aeb8f65f47ef.jpg" alt="board top 2">
@ -27,7 +27,7 @@ The `IO0` port is `GPIO0` that needs to be pulled to ground when powered on for
Once flashed, I configured it as follows (using Tasmota v6.1.1): Once flashed, I configured it as follows (using Tasmota v6.1.1):
ZJ-WFMN-B V1.1 ZJ-WFMN-B V1.1 (RGBW-Version)
| Field | Value | | Field | Value |
|---|---| |---|---|
@ -37,7 +37,7 @@ ZJ-WFMN-B V1.1
|D7 GPIO13|40 PWM4| |D7 GPIO13|40 PWM4|
|D5 GPIO14|37 PWM1| |D5 GPIO14|37 PWM1|
ZJ-WFMN-A V1.1 ZJ-WFMN-A V1.1 (RGBW Version with RF)
| Field | Value | Function | | Field | Value | Function |
|---|---|---| |---|---|---|
@ -49,13 +49,24 @@ ZJ-WFMN-A V1.1
|D8 GPIO15|40 PWM4|WHITE| |D8 GPIO15|40 PWM4|WHITE|
ZJ-WFMN-A V1.1(RGB version) ZJ-WFMN-A V1.1 (RGB version)
| Field | Value | Function | | Field | Value | Function |
|---|---|---| |---|---|---|
|Module type|18 Generic|Module type| |Module type|18 Generic|Module type|
|D1 GPIO5|38 PWM1|RED| |D1 GPIO5|37 PWM1|RED|
|D6 GPIO12|37 PWM2|GREEN| |D6 GPIO12|38 PWM2|GREEN|
|D7 GPIO13|39 PWM3|BLUE|
ZJ-WFMN-A V1.1 (RGB version with RF)
| Field | Value | Function |
|---|---|---|
|Module type|18 Generic|Module type|
|D2 GPIO4|51 IRRecv|IR Remote|
|D1 GPIO5|37 PWM1|RED|
|D6 GPIO12|38 PWM2|GREEN|
|D7 GPIO13|39 PWM3|BLUE| |D7 GPIO13|39 PWM3|BLUE|
With all that done, one of the critical things I needed to do so I could set the colors was to run the command to set `SetOption15` to `1`. For me, this was sending the MQTT command (you will need to adjust for your config): With all that done, one of the critical things I needed to do so I could set the colors was to run the command to set `SetOption15` to `1`. For me, this was sending the MQTT command (you will need to adjust for your config):
@ -71,7 +82,7 @@ mosquitto_pub -h openhab.sf -t 'cmnd/rgbled/color' -m '#ff0000ff'
### RF control ### RF control
If you have the RF variant, you will want to configure the GPIOs like this: If you have a RF variant, you will want to configure the GPIOs like this:
``` ```
{ "MagicHome RF", // Magic Home RF (ESP8266) - (Arilux LC10) { "MagicHome RF", // Magic Home RF (ESP8266) - (Arilux LC10)
@ -89,4 +100,39 @@ If you have the RF variant, you will want to configure the GPIOs like this:
0, 0 0, 0
}, },
``` ```
After chosing the correct module type in your Tasmota configuration, press a key on the remote after boot for the device to learn your code.
or like this:
```
{ "MagicHome RF", // Magic Home RF (ESP8285) - (IRrecv)
GPIO_USER, // GPIO00 Optional Button
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
GPIO_LED1_INV, // GPIO02 Blue onboard LED (not soldered)
GPIO_USER, // GPIO03 Serial TXD and Optional sensor0
GPIO_IRRECV, // GPIO04 RF receiver input
GPIO_PWM1, // GPIO05 RGB LED Green
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_PWM2, // GPIO12 RGB LED Blue
GPIO_PWM3, // GPIO13 RGBW LED White
0, 0, 0
},
```
After chosing the correct module type in your Tasmota configuration, press a key on the remote after boot for the device to learn your code.
### Full Set of rules for IR remote
Each rule can only be 511 characters long, some of the colors below use the built in predefined shortcut color numbers.
```
mosquitto_pub -t 'cmnd/RGBled/rule1' -m 'On IrReceived#Data=0x00FF906F Do Dimmer + EndOn On IrReceived#Data=0x00FF9867 Do Color2 1 EndOn On IrReceived#Data=0x00FFE817 Do HSBColor1 13 EndOn On IrReceived#Data=0x00FF02FD Do HSBColor1 23 EndOn On IrReceived#Data=0x00FF50AF Do HSBColor1 33 EndOn On IrReceived#Data=0x00FF38C7 Do HSBColor1 43 EndOn On IrReceived#Data=0x00FFB847 Do Dimmer - EndOn On IrReceived#Data=0x00FFD827 Do Color2 2 EndOn On IrReceived#Data=0x00FF48B7 Do HSBColor1 140 EndOn On IrReceived#Data=0x00FF32CD Do HSBColor1 160 EndOn'
mosquitto_pub -t 'cmnd/RGBled/rule2' -m 'Rule2 On IrReceived#Data=0x00FF7887 Do HSBColor1 180 EndOn On IrReceived#Data=0x00FF28D7 Do HSBColor1 200 EndOn On IrReceived#Data=0x00FFF807 Do Power 0 EndOn On IrReceived#Data=0x00FF8877 Do Color2 3 EndOn On IrReceived#Data=0x00FF6897 Do HSBColor1 260 EndOn On IrReceived#Data=0x00FF20DF Do HSBColor1 280 EndOn On IrReceived#Data=0x00FF708F Do HSBColor1 300 EndOn On IrReceived#Data=0x00FFF00F Do HSBColor1 320 EndOn'
mosquitto_pub -t 'cmnd/RGBled/rule3' -m 'Rule3 On IrReceived#Data=0x00FFB04F Do Power 1 EndOn On IrReceived#Data=0x00FFA857 Do Color2 12 EndOn On IrReceived#Data=0x00FFB24D Do Backlog Power 0; WakeupDuration 1; Dimmer 100; Wakeup EndOn On IrReceived#Data=0x00FF00FF Do Backlog Power 0; WakeupDuration 5; Wakeup EndOn On IrReceived#Data=0x00FF58A7 Do Backlog Scheme 2; Speed 1 EndOn On IrReceived#Data=0x00FF30CF Do Backlog Scheme 3; Speed 5 EndOn'
```
After setting the rules you need to activate them with the following:
```
mosquitto_pub -t 'cmnd/RGBled/rule1' -m 'ON'
mosquitto_pub -t 'cmnd/RGBled/rule2' -m 'ON'
mosquitto_pub -t 'cmnd/RGBled/rule3' -m 'ON'
```
The hex codes for the "Data" value come from the data tag when looking at the JSON sent via MQTT. You can also view this data on the Tasmota console screen. From here you can program it to do what ever you want. See here for more details: https://github.com/arendst/Sonoff-Tasmota/wiki/Rules