mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Updated Home Assistant (markdown)

Michael Ingraham 2019-09-14 17:42:22 -04:00
parent 63ec1fb9a1
commit b383def7e3
1 changed files with 5 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
Home-Assistant.md

@ -13,7 +13,7 @@ If you don't want to use this option, please refer to:
- [[Home Assistant - Manual Config|Home-Assistant-‐-Manual-Config]] - For Home Assistant 0.84.2 or later together with Sonoff-Tasmota developement version built 2018-12-13 or later
- [[Home Assistant - Manual Config (Legacy)|Home-Assistant-‐-Manual-Config-(Legacy)]] - For older versions of Home Assistant or Sonoff-Tasmota
Hass configuration not exposed in the UI is done by editing the file `configuration.yaml` which is found in folder `.homeassistant` after installation and first start of Hass. (Or in the `/config` folder, if you’re using Hass.io.)
Hass configuration is not exposed in the web UI. It is done by editing the `configuration.yaml` file which is found in folder `.homeassistant` after installing and first starting of Hass (or in the `/config` folder, if you’re using Hass.io).
Note: After every change to the configuration file you'll need to restart Hass to make it aware of the changes.
This can be done either:
@ -65,12 +65,12 @@ For other type of devices, e.g iFan02, example entries for configuration.yaml is
On each Tasmota device which should be automatically discovered by Hass, enter the following commands in the web console:\
`SetOption19 1` - Enables MQTT discovery\
By executing command `SetOption19 1` the automatic discovery feature is enabled and a retained MQTT message starting with topic "homeassistant/..", as defined in user_config.h HOME_ASSISTANT_DISCOVERY_PREFIX, is sent containing parameters used by Home Assistant to automatically configure a device.
By executing `SetOption19 1`, the automatic discovery feature is enabled and a retained MQTT message starting with topic "homeassistant/..", as defined in `my_user_config.h` HOME_ASSISTANT_DISCOVERY_PREFIX, is sent containing parameters used by Home Assistant to automatically configure a device.
To disable the automatic discovery feature and remove the retained message, execute command `SetOption19 0` and the homeassistant topic is removed from Home Assistant and MQTT broker.\ Device topic will not revert to defaults, you have to manually change back the topic structure to `%prefix%/%topic%/` in [**MQTT Configuration**](MQTT).
To disable the automatic discovery feature and remove the retained message, execute `SetOption19 0` and the "homeassistant" topic is removed from Home Assistant and MQTT broker. The device topic will not revert to defaults. You have to manually change the topic structure back to `%prefix%/%topic%/` in [**MQTT Configuration**](MQTT).
#### :warning: Important:
This feature will change the default Tasmota topic `%prefix%/%topic%/COMMAND`, e.g. `cmnd/sonoff/POWER` to `%topic%/%prefix%/COMMAND`, e.g. `sonoff/cmnd/POWER`.
This feature will change the default Tasmota topic `%prefix%/%topic%/<command>`, e.g. `cmnd/sonoff/POWER` to `%topic%/%prefix%/<command>`, e.g., `sonoff/cmnd/POWER`.
You cannot use custom defined topics while `Setoption19` is on since it will always revert it to `%topic%/%prefix%` due to Home Assistant requirements.
## Setup Tasmota devices through Home Assistant
@ -112,7 +112,7 @@ Use this automation to get all your (auto discovered) devices in sync, including
If you want all your devices to be found by Home Assistant, add an automation which will enable `SetOption19` for all devices.\
The automation will be triggered each time Home Assistant is (re)started although it is necessary to run it only if you have a device that doesn't have `SetOption19` enabled. After all your devices are setup with autodiscovery its advisable to turn off or delete this automation.
Note: This must use the default Tasmota topic format `%prefix%/%topic%/COMMAND`. After enabling SetOption19, the format will change to `%topic%/%prefix%/COMMAND` and those devices won't see this message.
Note: This must use the default Tasmota topic format `%prefix%/%topic%/<command>`. After enabling SetOption19, the format will change to `%topic%/%prefix%/<command>` and those devices won't see this message.
This can also be done manually in Home Assistant UI through Developer tools - ![](https://cdn.pbrd.co/images/HY47i1b.jpg) (MQTT) by posting to topic `cmnd/sonoffs/SetOption19` with payload `1`