mirror of https://github.com/arendst/Tasmota.git
Updated How to Flash the RF Bridge (markdown)
parent
3129b09d73
commit
d096a25a19
|
@ -46,6 +46,6 @@ Seect this AFTER you plugged in the bridge correctly while holding down the pair
|
||||||
|
|
||||||
11. At the top right of the Arduio IDE software, click on the right arrow (UPLOAD) to upload the firmware. This should take about 2-3 minutes as it compiles the firmware then uploads it.
|
11. At the top right of the Arduio IDE software, click on the right arrow (UPLOAD) to upload the firmware. This should take about 2-3 minutes as it compiles the firmware then uploads it.
|
||||||
|
|
||||||
When compete, disconnect the cables etc, switch the switch back to the ON position and it should now be working as you expect.
|
When compete, disconnect the cables etc, switch the switch back to the ON position (away from the 5 pin header) and it should now be working as you expect.
|
||||||
|
|
||||||
Credits @erew123 #1841
|
Credits @erew123 #1841
|
||||||
|
|
Loading…
Reference in New Issue