mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Updated Sonoff Touch (markdown)

Thomas Dietrich 2017-06-24 01:17:04 +02:00
parent 2b660f7cbb
commit d098b92cbf
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Sonoff-Touch.md

@ -16,7 +16,7 @@ As always, you need to access the serial interface. Carefully remove the top PCA
Be careful while removing and reassembling the top PCB. The touch sensor should be back in its intended place, be sure to not touch it directly during the modifications. Be careful while removing and reassembling the top PCB. The touch sensor should be back in its intended place, be sure to not touch it directly during the modifications.
The Sonoff-Touch button is not connected to **GPIO0** and can hence not be used to bring the module into [Programming Mode](https://github.com/arendst/Sonoff-Tasmota/wiki/Hardware-Preparation#bringing-the-module-in-flash-mode). A connection between GPIO0 and GND needs to be made manually. GPIO0 can be found on the right side of the ESP8285 and is the second pin from the bottom, as can be seen on the pictures. The Sonoff Touch button is not connected to **GPIO0** and can hence not be used to bring the module into [Programming Mode](https://github.com/arendst/Sonoff-Tasmota/wiki/Hardware-Preparation#bringing-the-module-in-flash-mode). A connection between GPIO0 and GND needs to be made manually. GPIO0 can be found on the right side of the ESP8285 and is the second pin from the bottom, as can be seen on the pictures.
### Arduino IDE Modifications ### Arduino IDE Modifications