mirror of https://github.com/arendst/Tasmota.git
Updated Hardware Preparation (markdown)
parent
5872ef7513
commit
daecdc0cd9
|
@ -35,6 +35,7 @@ For module specific instructions and restrictions of the individual devices, ple
|
||||||
* [Sonoff Dual](https://github.com/arendst/Sonoff-Tasmota/wiki/Sonoff-Dual)
|
* [Sonoff Dual](https://github.com/arendst/Sonoff-Tasmota/wiki/Sonoff-Dual)
|
||||||
* [Sonoff Pow](https://github.com/arendst/Sonoff-Tasmota/wiki/Sonoff-Pow)
|
* [Sonoff Pow](https://github.com/arendst/Sonoff-Tasmota/wiki/Sonoff-Pow)
|
||||||
* [Sonoff Touch](https://github.com/arendst/Sonoff-Tasmota/wiki/Sonoff-Touch)
|
* [Sonoff Touch](https://github.com/arendst/Sonoff-Tasmota/wiki/Sonoff-Touch)
|
||||||
|
* [Sonoff 4CH][https://github.com/arendst/Sonoff-Tasmota/wiki/Sonoff-4CH]
|
||||||
|
|
||||||
### Bringing the Module in Flash Mode
|
### Bringing the Module in Flash Mode
|
||||||
|
|
||||||
|
@ -87,12 +88,6 @@ This USB powered or external powered board provides one GPIO controlling two alt
|
||||||
|
|
||||||
Programming the on-board 3.3V [PSA-B](https://www.itead.cc/psa-01.html) is possible when Rx (Pin 7), Tx (Pin 8) and GND (Pin 9) are connected to the FTDI interface, the button is pressed and (USB) power is provided.
|
Programming the on-board 3.3V [PSA-B](https://www.itead.cc/psa-01.html) is possible when Rx (Pin 7), Tx (Pin 8) and GND (Pin 9) are connected to the FTDI interface, the button is pressed and (USB) power is provided.
|
||||||
|
|
||||||
### Sonoff 4ch
|
|
||||||
|
|
||||||
On the PCB the `TX` and `RX` pins are mislabeled. The `TX` of the programmer needs to connect to the `TX` on the 4ch PCB and the `RX` to the `RX`. Normally this is reversed.
|
|
||||||
|
|
||||||
Note to set the board to "Generic ESP8285 Module".
|
|
||||||
|
|
||||||
### Sonoff SC
|
### Sonoff SC
|
||||||
|
|
||||||
Flashing the ESP8266
|
Flashing the ESP8266
|
||||||
|
|
Loading…
Reference in New Issue