mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Move 4CH Pro

Thomas Dietrich 2017-07-26 20:04:22 +02:00
parent 9c6267b9e1
commit dc24af239e
1 changed files with 0 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
Hardware-Preparation.md

@ -104,13 +104,3 @@ Don't forget to reconnect the TX jumper after flashing ;)
<img alt="SonoffSC" src="https://puu.sh/vZZRI/ff36ff9244.jpg" width="230" />
<img alt="SonoffScRemoveTX" src="https://puu.sh/vZZSi/43244f3cc1.jpg" width="230" />
<img alt="SonoffSCButoom" src="https://puu.sh/vZZSC/aaa140afa3.jpg" width="130" />
### 4CH Pro
Because Firmware Button/Switch 1 is not directly connected to the GPIO0 of the ESP module a different method has to be used to program this board.
To program the ESP chip disconnect power from the board, connect a cable from any Ground (GND) pin to the GPIO0 pin on the ESP (be careful not to touch any of the other pins). This is the second pin to the right on the top row of pins (see picture). While holding the pin connected power on the board. The board does not respond to any button pressed when in programming mode and LED 1, 2 and 3 are on (might differ per board).
Use the ESP programming header as described in the picture to upload the firmware and follow regular programming procedure.
<img title="Sonoff 4CH Pro programming" src="https://github.com/arendst/arendst.github.io/blob/master/media/4chpro_gpio0.JPG" width="50%"/>