mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Itead DIY video link

Michael Ingraham 2019-07-02 11:32:28 -04:00
parent 056f2cf30d
commit e0c5087c88
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Sonoff-Basic.md

@ -26,7 +26,7 @@ This is the board layout for the third design iteration of the Sonoff Basic.
The Sonoff Basic R3 uses the ESP8255 chip. With this version, the mains power reverts to solder rails directly on the PCB. It also moves the Wi-Fi module to a separate PCB mounted on the main PCB. It makes access to the underside of the serial interface contacts quite difficult.
This version of the device supports the new Itead DIY architecture which allows OTA firmware upload. The process for performing an OTA update requires access to a jumper on the PCB (i.e., inside the case) and further Wi-Fi hotspot and app configuration. The device was reviewed by DigiblurDIY in [this video](https://www.youtube.com/watch?v=A-WcIz47Lco).
This version of the device supports the new Itead DIY architecture which [allows OTA firmware upload](https://www.youtube.com/watch?v=fRS-ukCgD_I). The process for performing an OTA update requires access to a jumper on the PCB (i.e., inside the case) and further Wi-Fi hotspot and app configuration. The device was reviewed by DigiblurDIY in [this video](https://www.youtube.com/watch?v=A-WcIz47Lco).
The serial interface pins are broken out on the PCB making flashing using a serial adapter considerably simpler than the Itead OTA process. Since the underside of the contacts is not easily reachable, use a solderless solution (i.e., friction) to maintain contact with the pins to flash the device.