mirror of https://github.com/arendst/Tasmota.git
Updated Dynamic Sleep (markdown)
parent
fb87b0432e
commit
e43d5ff0c2
|
@ -21,7 +21,7 @@ To make this manageable from device to device a new setting has been introduced
|
||||||
|
|
||||||
For default operation, this will be set to 50 milliseconds as there are generally no drivers or sensors that need to be polled at a rate higher than this.
|
For default operation, this will be set to 50 milliseconds as there are generally no drivers or sensors that need to be polled at a rate higher than this.
|
||||||
|
|
||||||
To allow for power usage flexibility this value may also be increased to a value of up to 255 milliseconds which is very useful to reduce power and processing demand on non-time critical devices such as switches (which is what most of Sonoff-Tasmota is used for.)
|
To allow for power usage flexibility this value may also be increased to a value of up to 250 milliseconds which is very useful to reduce power and processing demand on non-time critical devices such as switches (which is what most of Sonoff-Tasmota is used for.)
|
||||||
|
|
||||||
The purpose of this setting is to allow you as a user to set the speed at which driver and sensors will be serviced and as a result also the amount of time given to the SDK / Arduino ESP8266 core to handle its background tasks (which are not under direct control of the Sonoff-Tasmota firmware.)
|
The purpose of this setting is to allow you as a user to set the speed at which driver and sensors will be serviced and as a result also the amount of time given to the SDK / Arduino ESP8266 core to handle its background tasks (which are not under direct control of the Sonoff-Tasmota firmware.)
|
||||||
|
|
||||||
|
|
Loading…
Reference in New Issue