mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

typos

mchoff 2019-07-24 18:41:53 -04:00
parent 2e1fa6f3fb
commit e6b9c072d3
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Sonoff-TX-T0-Touch-1CH-3CH----US.md

@ -17,7 +17,7 @@ Like the T1, this does not have enough room to solder a header on.
Use a piece of thick cardboard to lay your top board on. Firmly press some jumpers through the serial holes into the cardboard.
If you push these through at an angle will be good enough to make contact to connect to your serial adaptor, trial and error but is not hard. pic attached.
regular flashing steps apply, connect Ground, Vcc TX, RC to your serial adaptor. paying attention to tx/rx!
regular flashing steps apply, connect Ground, Vcc TX, RX to your serial adaptor. paying attention to tx/rx!
for flash mode i use another jumper through the ground hole on the C2 pins (left of the serial and label J1). same, push jumper through cardboard to secure it.
While powered off hold the other end of jumper to R19 and then power up (plug in your usb serial adaptor).