mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

How to use the IR Remote with rules

sillyfrog 2018-08-29 11:34:33 +10:00
parent 39417b3951
commit ece5da847e
1 changed files with 13 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
MagicHome-LED-strip-controller.md

@ -55,6 +55,18 @@ Due to variants, you can configure:
- GPIO13 - This pin is not used on RGB board (so you'll leave it as "None"), but on RGBW, it's driving another channel (cold white or warm white) for LED strip.
Variant without Rx/Tx pads:
## Variant without Rx/Tx pads:
-![](https://raw.githubusercontent.com/wiki/xoseperez/espurna/images/flashing/ledcontroller-20-flash.jpg)
## Using the IRrecv (IR Remote) feature
If you have a variant with an IR Remote (as per the opening picture), you can use the new `rule` command to make the remote buttons change the light levels. For example, this rule allows me to turn it on and off, change the brightness, and turn it on to full white:
```
mosquitto_pub -t 'cmnd/light/rule1' -m 'on IrReceived#Data=FFF807 do power OFF endon on IrReceived#Data=FFB04F do WAKEUP endon on IrReceived#Data=FF906F do dimmer + endon on IrReceived#Data=FFB847 do dimmer - endon on IrReceived#Data=FFA857 do color #000000ff endon'
```
The hex codes for the "Data" value come from the data tag when looking at the JSON sent via MQTT. From here you can program it to do what ever you want. See here for more details: https://github.com/arendst/Sonoff-Tasmota/wiki/Rules
![](https://i.imgur.com/AWXrYTp.jpg)