refresh

Domoticz.md

@@ -1,14 +1,16 @@
 <img alt="Sonoff" src="https://github.com/arendst/arendst.github.io/blob/master/media/domoticz2.jpg" width="250" align="right" /> 
-Sonoff supports [Domoticz](http://www.domoticz.com/) MQTT 'out of the box'. Find below the procedure to start using it.
+Sonoff supports [Domoticz](http://www.domoticz.com/) MQTT 'out of the box' for both relays and sensors.
 
-## Assumptions
+Find below the procedure to configure Domoticz and Sonoff-Tasmota.
+
+## Prerequisites
 The following servers should be made available:
 
-- You have installed/access to a MQTT server and made contact with your sonoff
+- You have installed/access to a MQTT broker server and made contact with your sonoff
 - You have installed Domoticz
 
-## Domoticz
-Configure MQTT and Virtual Sensor hardware
+### Domoticz MQTT and Virtual Sensor
+Configure Domoticz MQTT and Virtual Sensor hardware.
 
 1. On the hardware page add Type ```MQTT Client Gateway with LAN interface```
     1. Give it a name
@@ -16,15 +18,19 @@ Configure MQTT and Virtual Sensor hardware
     3. Set the ```Public Topic``` to flat (which seems to relate to ```out``` in the select field)
 2. On the hardware page add Type ```Dummy (used for virtual switches)```
     1. Give it a name
+
+### Virtual switch
+Make a new virtual switch and remeber its Idx number.
+
 3. Make a new virtual switch to be used with Sonoff by clicking ```Create Virtual Sensors```
     1. Give it a name
     2. Select ```Sensor Type Switch```
 4. On the Devices page find the new switch by it's name
     1. Remember it's Idx number
 
-## Sonoff
+## Sonoff-Tasmota
 <img alt="Sonoff" src="https://github.com/arendst/arendst.github.io/blob/master/media/domoticz3.jpg" width="250" align="right" /> 
-Sonoff provides several ways of configuring Domoticz parameters.
+Sonoff provides different ways to configure Domoticz parameters.
 
 - Use the webinterface and select ```Configuration - Configure Domoticz```
     1. Set ```In topic``` to ```domoticz/in``` as hardcoded in Domoticz
@@ -39,7 +45,7 @@ Sonoff provides several ways of configuring Domoticz parameters.
     2. ```DomoticzOutTopic``` with ```domoticz/out``` as hardcoded in Domoticz
     3. ```DomoticzIdx1``` with the value read in step 4.1
 
-## Domoticz    
+## Usage    
 That's it! You can now switch Sonoff from the Domoticz user interface.
 
 - On the Switches page scroll down and find your Switch as configured in step 3