mirror of https://github.com/arendst/Tasmota.git
Updated Sonoff Th (markdown)
parent
094b62e45a
commit
fb7c21d592
10
Sonoff-Th.md
10
Sonoff-Th.md
|
@ -4,11 +4,13 @@ Itead Wiki: https://www.itead.cc/wiki/Sonoff_TH_10/16
|
|||
|
||||
![](https://smartlife.tech/blog/wp-content/uploads/2017/06/SonoffTHDiagram-1.jpg)
|
||||
|
||||
Relay:
|
||||
**One Relay:**
|
||||
rated to 10 or 16 amps (Input voltage: 90~ 250V AC)
|
||||
|
||||
Jack socket 2.5mm:
|
||||
**One Jack socket 2.5mm:**
|
||||
The jack socket make the most interesting difference to a Sonoff Basic. The jack socket connects clean to GPIO14.
|
||||
|
||||
Sonoff sensors with 2.5mm jack:
|
||||
Sonoff sells 3 sensors with 2.5mm jack, which are offered to use with the Sonoff Th. Sonoff TH Sensor Si7021 / Sonoff TH Sensor-AM2301 / Sonoff Temp Sensor-DS18B20. Lengs of the wire are approximately 47cm. The DS18b20 come with a wire length of approximately 1m. Sonoff Th and all 3 Sonoff sensors are supported in Tasmota. **It's important to clarify: A Si7021 sensor is out of the box a i2C device. The "Sonoff Si7021 sensor" is BASED on an Si7021. To make it plug&play with a Sonoff Th, an 8-bit MCU is added on the board. This changes the i2C communication of an Si7021 sensor over to a 1-wire device ! **
|
||||
**Sonoff sensors with 2.5mm jack:**
|
||||
Sonoff sells 3 sensors with 2.5mm jack, which are offered to use with the Sonoff Th. Sonoff TH Sensor Si7021 / Sonoff TH Sensor-AM2301 / Sonoff Temp Sensor-DS18B20. Lengs of the wires are approximately 47cm. The DS18b20 come with a wire length of approximately 1m.
|
||||
|
||||
**It's important to clarify: Out of the box a Si7021 sensor is a i2C device. The "Sonoff Si7021 sensor" is BASED on an Si7021. To make this sensor plug&play on a Sonoff Th together with the other two sensors sold by Sonoff, an 8-bit MCU is added on the board. This changes the i2C communication of an Si7021 sensor over to a 1-wire communication!**
|
Loading…
Reference in New Issue