new: [config] Added config.sh file

1_sanity_check.sh

@@ -1,11 +1,20 @@
 #!/bin/bash
 
+source config.sh placeHolder
+
 echo "Running sanity checks..."
-if ! openocd -v >/dev/null 2>&1; then
+if ! ${OPENOCD} -v >/dev/null 2>&1; then
     echo "OpenOCD does not seem to be working. Please validate that you have it installed correctly!"
     exit 1
 fi
 
+if [[ "${OPENOCD_VERSION}" == "0.10.0" ]]; then
+  echo "You seem to be using a vanilla version of openocd."
+  echo "In case you see the following error: "
+  echo "  openocd/interface_stlink.cfg:1: Error: Can't find interface/stlink.cfg"
+  echo "Update your openocd version."
+fi
+
 if ! /usr/bin/env python3 -V >/dev/null 2>&1; then
     echo "Could not run python3. Please validate that you have it installed correctly!"
     exit 1

2_backup_flash.sh

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+source config.sh $1
+
 if [[ $# -ne 1 ]]; then
     echo "Usage: backup_flash.sh <Adapter: jlink or stlink>"
     exit 1
@@ -10,17 +12,12 @@ if test -f backups/flash_backup.bin; then
     exit 1
 fi
 
-ADAPTER=$1
-
 echo "Make sure your Game & Watch is turned on and in the time screen. Press return when ready!"
 read -n 1
 
-mkdir -p backups
-mkdir -p logs
-
-echo "Attempting to dump flash using adapter $1."
+echo "Attempting to dump flash using adapter ${ADAPTER}."
 echo "Running OpenOCD... (This will take roughly 30 seconds, your Game and Watch screen will blink in between.)"
-if ! openocd -f openocd/flash_"$1".cfg >>logs/2_openocd.log 2>&1; then
+if ! ${OPENOCD} -f openocd/flash_"${ADAPTER}".cfg >>logs/2_openocd.log 2>&1; then
     echo "Failed to dump SPI flash from device. Verify debug connection and try again."
     exit 1
 fi

3_backup_internal_flash.sh

@@ -2,13 +2,7 @@
 
 set -e
 
-if [[ $# -ne 1 ]]; then
-    echo "Usage: $0 <Adapter: jlink or stlink>"
-    exit 1
-fi
-
-ADAPTER=$1
-mkdir -p logs
+source config.sh $1
 
 if test -f backups/internal_flash_backup.bin; then
     echo "Already have a backup in backups/internal_flash_backup.bin, refusing to overwrite."
@@ -48,7 +42,7 @@ echo "- Press return (while still holding the power button)!"
 read -n 1
 
 echo "Dumping internal flash..."    
-if ! openocd -f openocd/interface_"$1".cfg \
+if ! ${OPENOCD} -f openocd/interface_"${ADAPTER}".cfg \
     -c "init;" \
     -c "halt;" \
     -c "dump_image backups/internal_flash_backup.bin 0x24000000 131072" \

4_unlock_device.sh

@@ -1,13 +1,6 @@
 #!/bin/bash
 
-
-if [[ $# -ne 1 ]]; then
-    echo "Usage: $0 <Adapter: jlink or stlink>"
-    exit 1
-fi
-
-ADAPTER=$1
-mkdir -p logs
+source config.sh $1
 
 echo "Unlocking your device will erase its internal flash. Even though your backup"
 echo "is validated, this still can go wrong. Are you sure? (Y/y)"
@@ -25,7 +18,7 @@ if ! shasum --check shasums/internal_flash_backup.bin.sha1 >/dev/null 2>&1; then
 fi
 
 echo "Unlocking device... (Takes up to 30 seconds.)"    
-if ! openocd -f openocd/interface_"$1".cfg \
+if ! ${OPENOCD} -f openocd/interface_"${ADAPTER}".cfg \
     -c "init;" \
     -c "halt;" \
     -f openocd/rdp0.cfg >>logs/4_openocd.log 2>&1; then

5_restore.sh

@@ -1,11 +1,6 @@
 #!/bin/bash
 
-
-if [[ $# -ne 1 ]]; then
-    echo "Usage: $0 <Adapter: jlink or stlink>"
-    exit 1
-fi
-
+source config.sh $1
 
 if ! test -f backups/internal_flash_backup.bin; then
     echo "No backup of internal flash found in backups/internal_flash_backup.bin"
@@ -17,13 +12,11 @@ if ! test -f backups/flash_backup.bin; then
     exit 1
 fi
 
-ADAPTER=$1
-mkdir -p logs
 echo "Ok, restoring original firmware! (We will not lock the device, so you won't have to repeat this procedure!)"
 
 
 echo "Restoring internal flash..."
-if ! openocd -f openocd/interface_"$1".cfg \
+if ! ${OPENOCD} -f openocd/interface_"${ADAPTER}".cfg \
     -c "init;" \
     -c "halt;" \
     -c "program backups/internal_flash_backup.bin 0x08000000 verify;" \

config.sh

@@ -0,0 +1,18 @@
+#!/bin/bash
+
+OPENOCD=${OPENOCD:-$(which openocd)}
+OPENOCD_VERSION=$(openocd -v 2> >(cut -f 4 -d\ ) |head -1)
+ADAPTER=$1
+
+
+mkdir -p logs backups
+
+if [[ $# -ne 1 ]] && [[ ! "$0" =~ .*"config.sh" ]]; then
+    echo "Usage: $0 <Adapter: jlink or stlink>"
+    exit 1
+fi
+
+if [[ -z ${OPENOCD} ]]; then
+  echo "Cannot find 'openocd' in the PATH. You can set the environment variable 'OPENOCD' to manually specify the location"
+  exit 2
+fi

install_pwnadventure.sh

@@ -1,17 +1,9 @@
 #!/bin/bash
 
-
-if [[ $# -ne 1 ]]; then
-    echo "Usage: $0 <Adapter: jlink or stlink>"
-    exit 1
-fi
-
-ADAPTER=$1
-mkdir -p logs
-
+source config.sh $1
 
 echo "Installing on internal flash..."
-if ! openocd -f openocd/interface_"$1".cfg \
+if ! ${OPENOCD} -f openocd/interface_"${ADAPTER}".cfg \
     -c "init;" \
     -c "halt;" \
     -c "program prebuilt/gw_retrogo_nes.elf;" \

scripts/flashloader.sh

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+source config.sh $1
+
 DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null 2>&1 && pwd )"
 ELF=firmware/flash_programmer.elf
 ADDRESS=0
@@ -23,7 +25,7 @@ VAR_program_done=$(printf '0x%08x\n' $(get_symbol "program_done"))
 VAR_program_erase=$(printf '0x%08x\n' $(get_symbol "program_erase"))
 
 
-if ! openocd -f openocd/interface_"$1".cfg \
+if ! ${OPENOCD} -f openocd/interface_"${ADAPTER}".cfg \
     -c "init;" \
     -c "echo \"Resetting device\";" \
     -c "echo \"Programming ELF\";" \
@@ -51,7 +53,7 @@ echo "    (If this takes more than 2 minutes something went wrong.)"
 echo "    (If the screen blinks rapidly, something went wrong.)"
 echo "    (If the screen blinks slowly, everything worked but the script didn't detect it)"
 while true; do
-    DONE_MAGIC=$(openocd -f  openocd/interface_${1}.cfg -c "init; mdw ${VAR_program_done}" -c "exit;" 2>&1 | grep ${VAR_program_done} | cut -d" " -f2)
+    DONE_MAGIC=$(${OPENOCD} -f  openocd/interface_${ADAPTER}.cfg -c "init; mdw ${VAR_program_done}" -c "exit;" 2>&1 | grep ${VAR_program_done} | cut -d" " -f2)
     if [[ "$DONE_MAGIC" == "cafef00d" ]]; then
         echo "Done!"
         break;

scripts/rdp1.sh

@@ -1,13 +1,6 @@
 #!/bin/bash
 
-
-if [[ $# -ne 1 ]]; then
-    echo "Usage: $0 <Adapter: jlink or stlink>"
-    exit 1
-fi
-
-ADAPTER=$1
-mkdir -p logs
+source config.sh $1
 
 echo "This will look your device! Are you sure? (Y/y)"
 read -n 1 -r
@@ -24,7 +17,7 @@ if ! shasum --check shasums/internal_flash_backup.bin.sha1 >/dev/null 2>&1; then
 fi
 
 echo "Locking device... (Takes up to 30 seconds.)"    
-if ! openocd -f openocd/interface_"$1".cfg \
+if ! ${OPENOCD} -f openocd/interface_"${ADAPTER}".cfg \
     -c "init;" \
     -c "halt;" \
     -f openocd/rdp1.cfg >>logs/rdp1_openocd.log 2>&1; then