Fixed some typos and made changes to required tools (#14)
Added "libftdi1" to required tools as it's required by some builds before installing the nightly openocd-git build.
This commit is contained in:
parent
fb675c90ec
commit
ec07514ff1
|
@ -24,7 +24,7 @@ Please note that we recommend either a (full-size, not mini) J-Link/J-Link Edu,
|
||||||
|
|
||||||
## Connecting the debugger
|
## Connecting the debugger
|
||||||
|
|
||||||
When connecting the debugger ensrue that at least SWDIO, SWDCLK and GND are connected. Do *not* under any circumstances connect 3.3V to the VDD connection. If your debug probe (for example ST-Link clones) does not have a VTREF connector, just leave VDD unconnected. Connecting 3.3V to VDD will likely destroy your SPI flash.
|
When connecting the debugger ensure that at least SWDIO, SWDCLK and GND are connected. Do *not* under any circumstances connect 3.3V to the VDD connection. If your debug probe (for example ST-Link clones) does not have a VTREF connector, just leave VDD unconnected. Connecting 3.3V to VDD will likely destroy your SPI flash.
|
||||||
|
|
||||||
### Supported Debuggers
|
### Supported Debuggers
|
||||||
|
|
||||||
|
@ -37,7 +37,7 @@ Programmers we had a lot of trouble with: J-Link EDU Mini (does not work), cheap
|
||||||
Install the required tools:
|
Install the required tools:
|
||||||
|
|
||||||
```
|
```
|
||||||
sudo apt-get install gcc-arm-none-eabi binutils-arm-none-eabi openocd python3
|
sudo apt-get install gcc-arm-none-eabi binutils-arm-none-eabi python3 libftdi1
|
||||||
```
|
```
|
||||||
|
|
||||||
Note: The version of openocd included in Ubuntu 20.04 (0.10.0) does not include functionality that is needed by these scripts. A build from the unreleased master branch is needed. Please install a newer version either by building it yourself, or by installing a prebuilt package, e.g. from [this nightly build](https://github.com/kbeckmann/ubuntu-openocd-git-builder), using [xPack](https://xpack.github.io/openocd/) or similar.
|
Note: The version of openocd included in Ubuntu 20.04 (0.10.0) does not include functionality that is needed by these scripts. A build from the unreleased master branch is needed. Please install a newer version either by building it yourself, or by installing a prebuilt package, e.g. from [this nightly build](https://github.com/kbeckmann/ubuntu-openocd-git-builder), using [xPack](https://xpack.github.io/openocd/) or similar.
|
||||||
|
@ -59,7 +59,7 @@ OPENOCD="/opt/openocd-git/bin/openocd" ; ./1_sanity_check.sh
|
||||||
OPENOCD="/opt/openocd-git/bin/openocd" ; ./2_....
|
OPENOCD="/opt/openocd-git/bin/openocd" ; ./2_....
|
||||||
```
|
```
|
||||||
|
|
||||||
Finally you could just hardwire some variables in 'config.sh'
|
Finally, you could just hardwire some variables in 'config.sh'
|
||||||
|
|
||||||
### Mac Setup
|
### Mac Setup
|
||||||
|
|
||||||
|
|
Loading…
Reference in New Issue