463 lines
13 KiB
Python
463 lines
13 KiB
Python
import sys
|
|
import serial
|
|
import time
|
|
import struct
|
|
from collections import OrderedDict
|
|
|
|
__version__ = '0.0.6'
|
|
|
|
PYTHON2 = (sys.version_info < (3, 0))
|
|
|
|
import EDS
|
|
|
|
class I2CTimeout(Exception):
|
|
pass
|
|
|
|
class InternalState(OrderedDict):
|
|
def __repr__(self):
|
|
return "".join(["%8s %4x\n" % (k, v) for (k, v) in self.items()])
|
|
|
|
class _I2CEvent:
|
|
def rrw(self):
|
|
return ["WRITE", "READ"][self.rw]
|
|
def rack(self):
|
|
return ["NACK", "ACK"][self.ack]
|
|
|
|
class START(_I2CEvent):
|
|
def __init__(self, addr, rw, ack):
|
|
self.addr = addr
|
|
self.rw = rw
|
|
self.ack = ack
|
|
def __repr__(self):
|
|
return "<START 0x%02x %s %s>" % (self.addr, self.rrw(), self.rack())
|
|
def dump(self, f, fmt):
|
|
if fmt == "csv":
|
|
f.writerow(("START", self.rrw(), str(self.addr), self.rack()))
|
|
else:
|
|
assert False, "unsupported format"
|
|
|
|
class STOP(_I2CEvent):
|
|
def __repr__(self):
|
|
return "<STOP>"
|
|
def dump(self, f, fmt):
|
|
if fmt == "csv":
|
|
f.writerow(("STOP", None, None, None))
|
|
else:
|
|
assert False, "unsupported format"
|
|
|
|
class BYTE(_I2CEvent):
|
|
def __init__(self, b, rw, ack):
|
|
self.b = b
|
|
self.rw = rw
|
|
self.ack = ack
|
|
def __repr__(self):
|
|
return "<%s 0x%02x %s>" % (self.rrw(), self.b, self.rack())
|
|
def dump(self, f, fmt):
|
|
if fmt == "csv":
|
|
f.writerow(("BYTE", self.rrw(), str(self.b), self.rack()))
|
|
else:
|
|
assert False, "unsupported format"
|
|
|
|
class I2CDriver:
|
|
"""
|
|
A connected I2CDriver.
|
|
|
|
:ivar product: product code e.g. 'i2cdriver1'
|
|
:ivar serial: serial string of I2CDriver
|
|
:ivar uptime: time since I2CDriver boot, in seconds
|
|
:ivar voltage: USB voltage, in V
|
|
:ivar current: current used by attached device, in mA
|
|
:ivar temp: temperature, in degrees C
|
|
:ivar scl: state of SCL
|
|
:ivar sda: state of SDA
|
|
:ivar speed: current device speed in KHz (100 or 400)
|
|
:ivar mode: IO mode (I2C or bitbang)
|
|
:ivar pullups: programmable pullup enable pins
|
|
:ivar ccitt_crc: CCITT-16 CRC of all transmitted and received bytes
|
|
|
|
"""
|
|
def __init__(self, port = "/dev/ttyUSB0", reset = True):
|
|
"""
|
|
Connect to a hardware i2cdriver.
|
|
|
|
:param port: The USB port to connect to
|
|
:type port: str
|
|
:param reset: Issue an I2C bus reset on connection
|
|
:type reset: bool
|
|
|
|
"""
|
|
self.ser = serial.Serial(port, 1000000, timeout = 1)
|
|
|
|
# May be in capture or monitor mode, send char and wait for 50 ms
|
|
self.ser.write(b'@')
|
|
time.sleep(.050)
|
|
|
|
# May be waiting up to 64 bytes of input (command code 0xff)
|
|
self.ser.write(b'@' * 64)
|
|
self.ser.flush()
|
|
|
|
while self.ser.inWaiting():
|
|
self.ser.read(self.ser.inWaiting())
|
|
|
|
for c in [0x55, 0x00, 0xff, 0xaa]:
|
|
r = self.__echo(c)
|
|
if r != c:
|
|
print('Echo test failed - not attached?')
|
|
print('Expected %r but received %r' % (c, r))
|
|
raise IOError
|
|
self.getstatus()
|
|
if reset == "never":
|
|
return
|
|
if reset or (self.scl, self.sda) != (1, 1):
|
|
if self.reset() != 3:
|
|
assert 0, "I2C bus is busy"
|
|
self.getstatus()
|
|
self.setspeed(100)
|
|
|
|
if PYTHON2:
|
|
def __ser_w(self, s):
|
|
if isinstance(s, list) or isinstance(s, tuple):
|
|
s = "".join([chr(c) for c in s])
|
|
self.ser.write(s)
|
|
else:
|
|
def __ser_w(self, s):
|
|
if isinstance(s, list) or isinstance(s, tuple):
|
|
s = bytes(s)
|
|
self.ser.write(s)
|
|
|
|
def __echo(self, c):
|
|
self.__ser_w([ord('e'), c])
|
|
r = self.ser.read(1)
|
|
if PYTHON2:
|
|
return ord(r[0])
|
|
else:
|
|
return r[0]
|
|
|
|
def setspeed(self, s):
|
|
"""
|
|
Set the I2C bus speed.
|
|
|
|
:param s: speed in KHz, either 100 or 400
|
|
:type s: int
|
|
"""
|
|
assert s in (100, 400)
|
|
c = {100:b'1', 400:b'4'}[s]
|
|
self.__ser_w(c)
|
|
|
|
def setpullups(self, s):
|
|
"""
|
|
Set the I2CDriver pullup resistors
|
|
|
|
:param s: 6-bit pullup mask
|
|
"""
|
|
assert 0 <= s < 64
|
|
self.__ser_w([ord('u'), s])
|
|
|
|
def scan(self, silent = False):
|
|
""" Performs an I2C bus scan.
|
|
If silent is False, prints a map of devices.
|
|
Returns a list of the device addresses.
|
|
|
|
>>> i2c.scan()
|
|
-- -- -- -- -- -- -- --
|
|
-- -- -- -- -- -- -- --
|
|
-- -- -- -- 1C -- -- --
|
|
-- -- -- -- -- -- -- --
|
|
-- -- -- -- -- -- -- --
|
|
-- -- -- -- -- -- -- --
|
|
-- -- -- -- -- -- -- --
|
|
-- -- -- -- -- -- -- --
|
|
48 -- -- -- -- -- -- --
|
|
-- -- -- -- -- -- -- --
|
|
-- -- -- -- -- -- -- --
|
|
-- -- -- -- -- -- -- --
|
|
68 -- -- -- -- -- -- --
|
|
-- -- -- -- -- -- -- --
|
|
[28, 72, 104]
|
|
"""
|
|
|
|
self.ser.write(b'd')
|
|
d = struct.unpack("112c", self.ser.read(112))
|
|
if not silent:
|
|
for a,p in enumerate(d, 8):
|
|
if p == b"1":
|
|
st = "%02X" % a
|
|
else:
|
|
st = "--"
|
|
sys.stdout.write(st + " ")
|
|
if (a % 8) == 7:
|
|
sys.stdout.write("\n")
|
|
return [a for a,p in enumerate(d, 8) if p == b"1"]
|
|
|
|
def reset(self):
|
|
""" Send an I2C bus reset """
|
|
self.__ser_w(b'x')
|
|
return struct.unpack("B", self.ser.read(1))[0] & 3
|
|
|
|
def start(self, dev, rw):
|
|
"""
|
|
Start an I2C transaction
|
|
|
|
:param dev: 7-bit I2C device address
|
|
:param rw: read (1) or write (0)
|
|
|
|
To write bytes ``[0x12,0x34]`` to device ``0x75``:
|
|
|
|
>>> i2c.start(0x75, 0)
|
|
>>> i2c.write([0x12,034])
|
|
>>> i2c.stop()
|
|
|
|
"""
|
|
self.__ser_w([ord('s'), (dev << 1) | rw])
|
|
return self.ack()
|
|
|
|
def ack(self):
|
|
a = ord(self.ser.read(1))
|
|
if a & 2:
|
|
raise I2CTimeout
|
|
return (a & 1) != 0
|
|
|
|
def read(self, l):
|
|
""" Read l bytes from the I2C device, and NAK the last byte """
|
|
r = []
|
|
if l >= 64:
|
|
bulkpart = (l-1) // 64
|
|
for i in range(bulkpart):
|
|
self.__ser_w([ord('a'), 64])
|
|
r.append(self.ser.read(64))
|
|
l -= 64 * bulkpart
|
|
assert 0 <= l <= 64
|
|
self.__ser_w([0x80 + l - 1])
|
|
r.append(self.ser.read(l))
|
|
return b''.join(r)
|
|
|
|
def write(self, bb):
|
|
"""
|
|
Write bytes to the selected I2C device
|
|
|
|
:param bb: sequence to write
|
|
"""
|
|
ack = True
|
|
for i in range(0, len(bb), 64):
|
|
sub = bb[i:i + 64]
|
|
self.__ser_w([0xc0 + len(sub) - 1])
|
|
self.__ser_w(sub)
|
|
ack = self.ack()
|
|
return ack
|
|
|
|
def stop(self):
|
|
""" stop the i2c transaction """
|
|
self.ser.write(b'p')
|
|
|
|
def reboot(self):
|
|
self.__ser_w(b'_')
|
|
time.sleep(.5)
|
|
|
|
def regrd(self, dev, reg, fmt = "B"):
|
|
"""
|
|
Read a register from a device.
|
|
|
|
:param dev: 7-bit I2C device address
|
|
:param reg: register address 0-255
|
|
:param fmt: :py:func:`struct.unpack` format string for the register contents
|
|
|
|
If device 0x75 has a 16-bit register 102, it can be read with:
|
|
|
|
>>> i2c.regrd(0x75, 102, ">H")
|
|
4999
|
|
"""
|
|
|
|
if isinstance(fmt, str):
|
|
n = struct.calcsize(fmt)
|
|
self.__ser_w(b'r' + struct.pack("BBB", dev, reg, n))
|
|
r = struct.unpack(fmt, self.ser.read(n))
|
|
if len(r) == 1:
|
|
return r[0]
|
|
else:
|
|
return r
|
|
else:
|
|
n = fmt
|
|
self.__ser_w(b'r' + struct.pack("BBB", dev, reg, n))
|
|
return self.ser.read(n)
|
|
|
|
def regwr(self, dev, reg, vv):
|
|
"""Write a device's register.
|
|
|
|
:param dev: 7-bit I2C device address
|
|
:param reg: register address 0-255
|
|
:param vv: value to write. Either a single byte, or a sequence
|
|
|
|
To set device 0x34 byte register 7 to 0xA1:
|
|
|
|
>>> i2c.regwr(0x34, 7, 0xa1)
|
|
|
|
If device 0x75 has a big-endian 16-bit register 102 you can set it to 4999 with:
|
|
|
|
>>> i2c.regwr(0x75, 102, struct.pack(">H", 4999))
|
|
|
|
"""
|
|
r = self.start(dev, 0)
|
|
if r:
|
|
r = self.write(struct.pack("B", reg))
|
|
if r:
|
|
if isinstance(vv, int):
|
|
vv = struct.pack("B", vv)
|
|
r = self.write(vv)
|
|
self.stop()
|
|
return r
|
|
|
|
def monitor(self, s):
|
|
""" Enter or leave monitor mode
|
|
|
|
:param s: ``True`` to enter monitor mode, ``False`` to leave
|
|
"""
|
|
|
|
if s:
|
|
self.__ser_w(b'm')
|
|
time.sleep(.1)
|
|
else:
|
|
self.__ser_w(b' ')
|
|
time.sleep(.1)
|
|
self.__echo(0x40)
|
|
|
|
def introspect(self):
|
|
""" Update all status variables """
|
|
self.ser.write(b'J')
|
|
r = self.ser.read(80)
|
|
assert len(r) == 80, r
|
|
body = r[1:-1].decode() # remove [ and ]
|
|
nn = (
|
|
"id ds sp SMB0CF SMB0CN T2 T3 IE EIE1 P0 P0MDIN P0MDOUT P1 P1MDIN P1MDOUT P2 P2MDOUT".split() +
|
|
"convs".split()
|
|
)
|
|
bb = [int(w, 16) for w in body.split()]
|
|
assert len(nn) == len(bb)
|
|
return InternalState(zip(nn, bb))
|
|
|
|
def restore(self):
|
|
self.ser.write(b'i')
|
|
|
|
def __repr__(self):
|
|
return "<%s serial=%s uptime=%d, SCL=%d, SDA=%d>" % (
|
|
self.product,
|
|
self.serial,
|
|
self.uptime,
|
|
self.scl,
|
|
self.sda)
|
|
|
|
def capture_start(self, idle=False, start = START, abyte = BYTE, stop = STOP):
|
|
self.__ser_w([ord('c')])
|
|
def nstream():
|
|
while True:
|
|
bb = self.ser.read(256)
|
|
if PYTHON2:
|
|
for b in bb:
|
|
yield (ord(b) >> 4) & 0xf
|
|
yield ord(b) & 0xf
|
|
else:
|
|
for b in bb:
|
|
yield (b >> 4) & 0xf
|
|
yield b & 0xf
|
|
def parser():
|
|
starting = False
|
|
rw = 0
|
|
for n in nstream():
|
|
if n == 0:
|
|
if idle:
|
|
yield None
|
|
elif n == 1:
|
|
starting = True
|
|
bits = []
|
|
elif n == 2:
|
|
yield stop()
|
|
starting = True
|
|
bits = []
|
|
elif n in (8,9,10,11,12,13,14,15):
|
|
# w(str(n&7))
|
|
bits.append(n & 7)
|
|
if len(bits) == 3:
|
|
b9 = (bits[0] << 6) | (bits[1] << 3) | bits[2]
|
|
b8 = (b9 >> 1)
|
|
ack = b9 & 1
|
|
if starting:
|
|
rw = b8 & 1
|
|
yield start(b8 >> 1, rw, ack == 0)
|
|
starting = False
|
|
else:
|
|
yield abyte(b8, rw, ack == 0)
|
|
bits = []
|
|
else:
|
|
assert 0, "unexpected token"
|
|
return parser
|
|
|
|
def capture_stop(self):
|
|
while self.ser.in_waiting:
|
|
self.ser.read(self.ser.in_waiting)
|
|
self.__ser_w([ord('c')])
|
|
while self.ser.in_waiting:
|
|
self.ser.read(self.ser.in_waiting)
|
|
self.__echo(0x40)
|
|
|
|
def capture(self):
|
|
self.__ser_w([ord('c')])
|
|
while 0:
|
|
b = self.ser.read(1)
|
|
for c in b:
|
|
print("%02x" % c)
|
|
w = sys.stdout.write
|
|
def nstream():
|
|
while 1:
|
|
for b in self.ser.read(256):
|
|
yield (b >> 4) & 0xf
|
|
yield b & 0xf
|
|
bits = []
|
|
for n in nstream():
|
|
if n == 0:
|
|
w(".")
|
|
elif n == 1:
|
|
w("S")
|
|
bits = []
|
|
elif n == 2:
|
|
w("P\n")
|
|
bits = []
|
|
elif n in (8,9,10,11,12,13,14,15):
|
|
# w(str(n&7))
|
|
bits.append(n & 7)
|
|
if len(bits) == 3:
|
|
b9 = (bits[0] << 6) | (bits[1] << 3) | bits[2]
|
|
b8 = (b9 >> 1)
|
|
ack = b9 & 1
|
|
w('%02x%s' % (b8, " !"[ack]))
|
|
bits = []
|
|
else:
|
|
assert 0, "unexpected token"
|
|
|
|
def getstatus(self):
|
|
""" Update all status variables """
|
|
self.ser.write(b'?')
|
|
r = self.ser.read(80)
|
|
body = r[1:-1].decode() # remove [ and ]
|
|
(self.product,
|
|
self.serial,
|
|
uptime,
|
|
voltage,
|
|
current,
|
|
temp,
|
|
mode,
|
|
sda,
|
|
scl,
|
|
speed,
|
|
pullups,
|
|
ccitt_crc) = body.split()
|
|
self.uptime = int(uptime)
|
|
self.voltage = float(voltage)
|
|
self.current = float(current)
|
|
self.temp = float(temp)
|
|
self.mode = mode
|
|
self.scl = int(scl)
|
|
self.sda = int(sda)
|
|
self.speed = int(speed)
|
|
self.pullups = int(pullups, 16)
|
|
self.ccitt_crc = int(ccitt_crc, 16)
|
|
return repr(self)
|