micropython/stmhal/boards/CERB40/mpconfigboard.h

#define CERB40

#define MICROPY_HW_BOARD_NAME       "Cerb40"
#define MICROPY_HW_MCU_NAME         "STM32F405RG"
#define MICROPY_PY_SYS_PLATFORM     "pyboard"

#define MICROPY_HW_HAS_SWITCH       (0)
#define MICROPY_HW_HAS_FLASH        (1)
#define MICROPY_HW_HAS_SDCARD       (0)
#define MICROPY_HW_HAS_MMA7660      (0)
#define MICROPY_HW_HAS_LIS3DSH      (0)
#define MICROPY_HW_HAS_LCD          (0)
#define MICROPY_HW_ENABLE_RNG       (1)
#define MICROPY_HW_ENABLE_RTC       (1)
#define MICROPY_HW_ENABLE_TIMER     (1)
#define MICROPY_HW_ENABLE_SERVO     (0)
#define MICROPY_HW_ENABLE_DAC       (1)
#define MICROPY_HW_ENABLE_CAN       (1)

// HSE is 12MHz
#define MICROPY_HW_CLK_PLLM (12)
#define MICROPY_HW_CLK_PLLN (336)
#define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV2)
#define MICROPY_HW_CLK_PLLQ (7)

// UART config
#define MICROPY_HW_UART1_PORT (GPIOA)
#define MICROPY_HW_UART1_PINS (GPIO_PIN_9 | GPIO_PIN_10)
#define MICROPY_HW_UART2_PORT (GPIOA)
#define MICROPY_HW_UART2_PINS (GPIO_PIN_2 | GPIO_PIN_3)
#define MICROPY_HW_UART2_RTS  (GPIO_PIN_1)
#define MICROPY_HW_UART2_CTS  (GPIO_PIN_0)
#define MICROPY_HW_UART3_PORT (GPIOD)
#define MICROPY_HW_UART3_PINS (GPIO_PIN_8 | GPIO_PIN_9)
#define MICROPY_HW_UART3_RTS  (GPIO_PIN_12)
#define MICROPY_HW_UART3_CTS  (GPIO_PIN_11)
#define MICROPY_HW_UART4_PORT (GPIOA)
#define MICROPY_HW_UART4_PINS (GPIO_PIN_0 | GPIO_PIN_1)
#define MICROPY_HW_UART5_TX_PORT (GPIOC)
#define MICROPY_HW_UART5_TX_PIN  (GPIO_PIN_12)
#define MICROPY_HW_UART5_RX_PORT (GPIOD)
#define MICROPY_HW_UART5_RX_PIN  (GPIO_PIN_2)
#define MICROPY_HW_UART6_PORT (GPIOC)
#define MICROPY_HW_UART6_PINS (GPIO_PIN_6 | GPIO_PIN_7)

// I2C busses
#define MICROPY_HW_I2C1_SCL (pin_B6)
#define MICROPY_HW_I2C1_SDA (pin_B7)
#define MICROPY_HW_I2C2_SCL (pin_B10)
#define MICROPY_HW_I2C2_SDA (pin_B11)
#define MICROPY_HW_I2C3_SCL (pin_A8)
#define MICROPY_HW_I2C3_SDA (pin_C9)

// SPI busses
#define MICROPY_HW_SPI1_NSS  (pin_A4)
#define MICROPY_HW_SPI1_SCK  (pin_A5)
#define MICROPY_HW_SPI1_MISO (pin_A6)
#define MICROPY_HW_SPI1_MOSI (pin_A7)
#define MICROPY_HW_SPI3_NSS  (pin_A4)
#define MICROPY_HW_SPI3_SCK  (pin_B3)
#define MICROPY_HW_SPI3_MISO (pin_B4)
#define MICROPY_HW_SPI3_MOSI (pin_B5)

// The Cerb40 has No LEDs

// The Cerb40 has No SDCard

// USB config
//#define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9)
//#define MICROPY_HW_USB_OTG_ID_PIN      (pin_A10)
stmhal: Add support for FEZ Cerb40 II board from ghielectronics.com. 2015-01-16 05:45:21 +00:00			`#define CERB40`

			`#define MICROPY_HW_BOARD_NAME "Cerb40"`
			`#define MICROPY_HW_MCU_NAME "STM32F405RG"`
			`#define MICROPY_PY_SYS_PLATFORM "pyboard"`

			`#define MICROPY_HW_HAS_SWITCH (0)`
stmhal/diskio: Introduce MICROPY_HW_HAS_FLASH setting. To allow to reuse stmhal/diskio for ports which don't have flash but have other storage devices. 2016-02-06 12:48:58 +00:00			`#define MICROPY_HW_HAS_FLASH (1)`
stmhal: Add support for FEZ Cerb40 II board from ghielectronics.com. 2015-01-16 05:45:21 +00:00			`#define MICROPY_HW_HAS_SDCARD (0)`
			`#define MICROPY_HW_HAS_MMA7660 (0)`
			`#define MICROPY_HW_HAS_LIS3DSH (0)`
			`#define MICROPY_HW_HAS_LCD (0)`
			`#define MICROPY_HW_ENABLE_RNG (1)`
			`#define MICROPY_HW_ENABLE_RTC (1)`
			`#define MICROPY_HW_ENABLE_TIMER (1)`
			`#define MICROPY_HW_ENABLE_SERVO (0)`
			`#define MICROPY_HW_ENABLE_DAC (1)`
			`#define MICROPY_HW_ENABLE_CAN (1)`

stmhal: Make HSE PLL parameters configurable per board. 2015-04-18 15:30:04 +01:00			`// HSE is 12MHz`
			`#define MICROPY_HW_CLK_PLLM (12)`
			`#define MICROPY_HW_CLK_PLLN (336)`
			`#define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV2)`
			`#define MICROPY_HW_CLK_PLLQ (7)`

stmhal: Allow to configure UART pins completely via mpconfigboard.h. 2015-05-02 17:31:39 +01:00			`// UART config`
			`#define MICROPY_HW_UART1_PORT (GPIOA)`
			`#define MICROPY_HW_UART1_PINS (GPIO_PIN_9 \| GPIO_PIN_10)`
			`#define MICROPY_HW_UART2_PORT (GPIOA)`
			`#define MICROPY_HW_UART2_PINS (GPIO_PIN_2 \| GPIO_PIN_3)`
			`#define MICROPY_HW_UART2_RTS (GPIO_PIN_1)`
			`#define MICROPY_HW_UART2_CTS (GPIO_PIN_0)`
			`#define MICROPY_HW_UART3_PORT (GPIOD)`
			`#define MICROPY_HW_UART3_PINS (GPIO_PIN_8 \| GPIO_PIN_9)`
			`#define MICROPY_HW_UART3_RTS (GPIO_PIN_12)`
			`#define MICROPY_HW_UART3_CTS (GPIO_PIN_11)`
			`#define MICROPY_HW_UART4_PORT (GPIOA)`
			`#define MICROPY_HW_UART4_PINS (GPIO_PIN_0 \| GPIO_PIN_1)`
stmhal: Add support for UART5 I tested this on my CERB40 board and it seems to be working fine. 2015-05-31 23:37:37 +01:00			`#define MICROPY_HW_UART5_TX_PORT (GPIOC)`
			`#define MICROPY_HW_UART5_TX_PIN (GPIO_PIN_12)`
			`#define MICROPY_HW_UART5_RX_PORT (GPIOD)`
			`#define MICROPY_HW_UART5_RX_PIN (GPIO_PIN_2)`
stmhal: Allow to configure UART pins completely via mpconfigboard.h. 2015-05-02 17:31:39 +01:00			`#define MICROPY_HW_UART6_PORT (GPIOC)`
			`#define MICROPY_HW_UART6_PINS (GPIO_PIN_6 \| GPIO_PIN_7)`

stmhal: Make I2C busses and their pins configurable in mpconfigboard.h. 2015-04-18 16:12:57 +01:00			`// I2C busses`
			`#define MICROPY_HW_I2C1_SCL (pin_B6)`
			`#define MICROPY_HW_I2C1_SDA (pin_B7)`
			`#define MICROPY_HW_I2C2_SCL (pin_B10)`
			`#define MICROPY_HW_I2C2_SDA (pin_B11)`
stmhal: CERB40 - Add pins defines for I2C3 2016-02-11 05:25:30 +00:00			`#define MICROPY_HW_I2C3_SCL (pin_A8)`
			`#define MICROPY_HW_I2C3_SDA (pin_C9)`
stmhal: Make I2C busses and their pins configurable in mpconfigboard.h. 2015-04-18 16:12:57 +01:00
stmhal: For SPI config, use HW_SPIx_SCK instead of HW_ENABLE_SPIx. Previously, SPI was configured by a board defining MICROPY_HW_ENABLE_SPIx to 0 or 1. Now, the board should define MICROPY_HW_SPIx_SCK, MISO, MOSI and NSS. This makes it the same as how I2C is configured. 2015-12-12 15:02:02 +00:00			`// SPI busses`
			`#define MICROPY_HW_SPI1_NSS (pin_A4)`
			`#define MICROPY_HW_SPI1_SCK (pin_A5)`
			`#define MICROPY_HW_SPI1_MISO (pin_A6)`
			`#define MICROPY_HW_SPI1_MOSI (pin_A7)`
			`#define MICROPY_HW_SPI3_NSS (pin_A4)`
			`#define MICROPY_HW_SPI3_SCK (pin_B3)`
			`#define MICROPY_HW_SPI3_MISO (pin_B4)`
			`#define MICROPY_HW_SPI3_MOSI (pin_B5)`

stmhal: Add support for FEZ Cerb40 II board from ghielectronics.com. 2015-01-16 05:45:21 +00:00			`// The Cerb40 has No LEDs`

			`// The Cerb40 has No SDCard`

			`// USB config`
			`//#define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9)`
			`//#define MICROPY_HW_USB_OTG_ID_PIN (pin_A10)`