mirrors
/
micropython
mirror of https://github.com/micropython/micropython.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
micropython/cc3200/hal/inc/hw_common_reg.h

1118 lines
60 KiB
C
Raw Normal View History

cc3200: Add cc3200 port of MicroPython. The port currently implements support for GPIO, RTC, ExtInt and the WiFi subsystem. A small file system is available in the serial flash. A bootloader which makes OTA updates possible, is also part of this initial implementation.
2015-02-06 14:35:48 +00:00
//*****************************************************************************
//
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
//
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#ifndef __HW_COMMON_REG_H__
#define __HW_COMMON_REG_H__
//*****************************************************************************
//
// The following are defines for the COMMON_REG register offsets.
//
//*****************************************************************************
#define COMMON_REG_O_I2C_Properties_Register \
0x00000000
#define COMMON_REG_O_SPI_Properties_Register \
0x00000004
#define COMMON_REG_O_APPS_sh_resource_Interrupt_enable \
0x0000000C
#define COMMON_REG_O_APPS_sh_resource_Interrupt_status \
0x00000010
#define COMMON_REG_O_NWP_sh_resource_Interrupt_enable \
0x00000014
#define COMMON_REG_O_NWP_sh_resource_Interrupt_status \
0x00000018
#define COMMON_REG_O_Flash_ctrl_reg \
0x0000001C
#define COMMON_REG_O_Bus_matrix_M0_segment_access_config \
0x00000024
#define COMMON_REG_O_Bus_matrix_M1_segment_access_config \
0x00000028
#define COMMON_REG_O_Bus_matrix_M2_segment_access_config \
0x0000002C
#define COMMON_REG_O_Bus_matrix_M3_segment_access_config \
0x00000030
#define COMMON_REG_O_Bus_matrix_M4_segment_access_config \
0x00000034
#define COMMON_REG_O_Bus_matrix_M5_segment_access_config \
0x00000038
#define COMMON_REG_O_GPIO_properties_register \
0x0000003C
#define COMMON_REG_O_APPS_NW_SEMAPHORE1 \
0x00000040
#define COMMON_REG_O_APPS_NW_SEMAPHORE2 \
0x00000044
#define COMMON_REG_O_APPS_NW_SEMAPHORE3 \
0x00000048
#define COMMON_REG_O_APPS_NW_SEMAPHORE4 \
0x0000004C
#define COMMON_REG_O_APPS_NW_SEMAPHORE5 \
0x00000050
#define COMMON_REG_O_APPS_NW_SEMAPHORE6 \
0x00000054
#define COMMON_REG_O_APPS_NW_SEMAPHORE7 \
0x00000058
#define COMMON_REG_O_APPS_NW_SEMAPHORE8 \
0x0000005C
#define COMMON_REG_O_APPS_NW_SEMAPHORE9 \
0x00000060
#define COMMON_REG_O_APPS_NW_SEMAPHORE10 \
0x00000064
#define COMMON_REG_O_APPS_NW_SEMAPHORE11 \
0x00000068
#define COMMON_REG_O_APPS_NW_SEMAPHORE12 \
0x0000006C
#define COMMON_REG_O_APPS_SEMAPPHORE_PEND \
0x00000070
#define COMMON_REG_O_NW_SEMAPPHORE_PEND \
0x00000074
#define COMMON_REG_O_SEMAPHORE_STATUS \
0x00000078
#define COMMON_REG_O_IDMEM_TIM_Update \
0x0000007C
#define COMMON_REG_O_FPGA_ROM_WR_EN \
0x00000080
#define COMMON_REG_O_NW_INT_MASK \
0x00000084
#define COMMON_REG_O_NW_INT_MASK_SET \
0x00000088
#define COMMON_REG_O_NW_INT_MASK_CLR \
0x0000008C
#define COMMON_REG_O_NW_INT_STS_CLR \
0x00000090
#define COMMON_REG_O_NW_INT_ACK 0x00000094
#define COMMON_REG_O_NW_INT_TRIG \
0x00000098
#define COMMON_REG_O_NW_INT_STS_MASKED \
0x0000009C
#define COMMON_REG_O_NW_INT_STS_RAW \
0x000000A0
#define COMMON_REG_O_APPS_INT_MASK \
0x000000A4
#define COMMON_REG_O_APPS_INT_MASK_SET \
0x000000A8
#define COMMON_REG_O_APPS_INT_MASK_CLR \
0x000000AC
#define COMMON_REG_O_APPS_INT_STS_CLR \
0x000000B0
#define COMMON_REG_O_APPS_INT_ACK \
0x000000B4
#define COMMON_REG_O_APPS_INT_TRIG \
0x000000B8
#define COMMON_REG_O_APPS_INT_STS_MASKED \
0x000000BC
#define COMMON_REG_O_APPS_INT_STS_RAW \
0x000000C0
#define COMMON_REG_O_IDMEM_TIM_Updated \
0x000000C4
#define COMMON_REG_O_APPS_GPIO_TRIG_EN \
0x000000C8
#define COMMON_REG_O_EMU_DEBUG_REG \
0x000000CC
#define COMMON_REG_O_SEMAPHORE_STATUS2 \
0x000000D0
#define COMMON_REG_O_SEMAPHORE_PREV_OWNER1 \
0x000000D4
#define COMMON_REG_O_SEMAPHORE_PREV_OWNER2 \
0x000000D8
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_I2C_Properties_Register register.
//
//******************************************************************************
#define COMMON_REG_I2C_Properties_Register_I2C_Properties_Register_M \
0x00000003 // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_I2C_Properties_Register_I2C_Properties_Register_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_SPI_Properties_Register register.
//
//******************************************************************************
#define COMMON_REG_SPI_Properties_Register_SPI_Properties_Register_M \
0x00000003 // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_SPI_Properties_Register_SPI_Properties_Register_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_sh_resource_Interrupt_enable register.
//
//******************************************************************************
#define COMMON_REG_APPS_sh_resource_Interrupt_enable_APPS_sh_resource_Interrupt_enable_M \
0x0000000F // Interrupt enable APPS bit 0 ->
// when '1' enable I2C interrupt bit
// 1 -> when '1' enable SPI
// interrupt bit 3 ->
// when '1' enable GPIO interrupt
#define COMMON_REG_APPS_sh_resource_Interrupt_enable_APPS_sh_resource_Interrupt_enable_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_sh_resource_Interrupt_status register.
//
//******************************************************************************
#define COMMON_REG_APPS_sh_resource_Interrupt_status_APPS_sh_resource_Interrupt_status_M \
0x0000000F // Interrupt enable APPS bit 0 ->
// when '1' enable I2C interrupt bit
// 1 -> when '1' enable SPI
// interrupt bit 3 ->
// when '1' enable GPIO interrupt
#define COMMON_REG_APPS_sh_resource_Interrupt_status_APPS_sh_resource_Interrupt_status_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NWP_sh_resource_Interrupt_enable register.
//
//******************************************************************************
#define COMMON_REG_NWP_sh_resource_Interrupt_enable_NWP_sh_resource_Interrupt_enable_M \
0x0000000F // Interrupt enable NWP bit 0 ->
// when '1' enable I2C interrupt bit
// 1 -> when '1' enable SPI
// interrupt bit 3 ->
// when '1' enable GPIO interrupt
#define COMMON_REG_NWP_sh_resource_Interrupt_enable_NWP_sh_resource_Interrupt_enable_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NWP_sh_resource_Interrupt_status register.
//
//******************************************************************************
#define COMMON_REG_NWP_sh_resource_Interrupt_status_NWP_sh_resource_Interrupt_status_M \
0x0000000F // Interrupt enable NWP bit 0 ->
// when '1' enable I2C interrupt bit
// 1 -> when '1' enable SPI
// interrupt bit 3 ->
// when '1' enable GPIO interrupt
#define COMMON_REG_NWP_sh_resource_Interrupt_status_NWP_sh_resource_Interrupt_status_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_Flash_ctrl_reg register.
//
//******************************************************************************
#define COMMON_REG_Flash_ctrl_reg_Flash_ctrl_reg_M \
0x00000003 // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_Flash_ctrl_reg_Flash_ctrl_reg_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_Bus_matrix_M0_segment_access_config register.
//
//******************************************************************************
#define COMMON_REG_Bus_matrix_M0_segment_access_config_Bus_matrix_M0_segment_access_config_M \
0x0003FFFF // Master 0 control word matrix to
// each segment. Tieoff. Bit value 1
// indicates segment is accesable.
#define COMMON_REG_Bus_matrix_M0_segment_access_config_Bus_matrix_M0_segment_access_config_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_Bus_matrix_M1_segment_access_config register.
//
//******************************************************************************
#define COMMON_REG_Bus_matrix_M1_segment_access_config_Bus_matrix_M1_segment_access_config_M \
0x0003FFFF // Master 1 control word matrix to
// each segment. Tieoff. Bit value 1
// indicates segment is accesable.
#define COMMON_REG_Bus_matrix_M1_segment_access_config_Bus_matrix_M1_segment_access_config_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_Bus_matrix_M2_segment_access_config register.
//
//******************************************************************************
#define COMMON_REG_Bus_matrix_M2_segment_access_config_Bus_matrix_M2_segment_access_config_M \
0x0003FFFF // Master 2 control word matrix to
// each segment. Tieoff. Bit value 1
// indicates segment is accesable.
#define COMMON_REG_Bus_matrix_M2_segment_access_config_Bus_matrix_M2_segment_access_config_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_Bus_matrix_M3_segment_access_config register.
//
//******************************************************************************
#define COMMON_REG_Bus_matrix_M3_segment_access_config_Bus_matrix_M3_segment_access_config_M \
0x0003FFFF // Master 3 control word matrix to
// each segment. Tieoff. Bit value 1
// indicates segment is accesable.
#define COMMON_REG_Bus_matrix_M3_segment_access_config_Bus_matrix_M3_segment_access_config_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_Bus_matrix_M4_segment_access_config register.
//
//******************************************************************************
#define COMMON_REG_Bus_matrix_M4_segment_access_config_Bus_matrix_M4_segment_access_config_M \
0x0003FFFF // Master 4 control word matrix to
// each segment. Tieoff. Bit value 1
// indicates segment is accesable.
#define COMMON_REG_Bus_matrix_M4_segment_access_config_Bus_matrix_M4_segment_access_config_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_Bus_matrix_M5_segment_access_config register.
//
//******************************************************************************
#define COMMON_REG_Bus_matrix_M5_segment_access_config_Bus_matrix_M5_segment_access_config_M \
0x0003FFFF // Master 5 control word matrix to
// each segment. Tieoff. Bit value 1
// indicates segment is accesable.
#define COMMON_REG_Bus_matrix_M5_segment_access_config_Bus_matrix_M5_segment_access_config_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_GPIO_properties_register register.
//
//******************************************************************************
#define COMMON_REG_GPIO_properties_register_GPIO_properties_register_M \
0x000003FF // Shared GPIO configuration
// register. Bit [1:0] to configure
// GPIO0 Bit [3:2] to configure
// GPIO1 Bit [5:4] to configure
// GPIO2 Bit [7:6] to configure
// GPIO3 Bit [9:8] to configure
// GPIO4 each GPIO can be
// individully selected. When “00”
// GPIO is free resource. When “01”
// GPIO is APPS resource. When “10”
// GPIO is NWP resource. Writing 11
// doesnt have any affect, i.e. If
// one write only relevant gpio
// semaphore and other bits are 1s,
// it'll not disturb the other
// semaphore bits. For example : Say
// If NW wants to take control of
// gpio-1, one should write
// 10'b11_1111_1011 and if one wants
// to release it write
// 10'b11_1111_0011.
#define COMMON_REG_GPIO_properties_register_GPIO_properties_register_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE1 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE1_APPS_NW_SEMAPHORE1_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE1_APPS_NW_SEMAPHORE1_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE2 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE2_APPS_NW_SEMAPHORE2_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE2_APPS_NW_SEMAPHORE2_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE3 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE3_APPS_NW_SEMAPHORE3_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE3_APPS_NW_SEMAPHORE3_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE4 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE4_APPS_NW_SEMAPHORE4_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE4_APPS_NW_SEMAPHORE4_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE5 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE5_APPS_NW_SEMAPHORE5_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE5_APPS_NW_SEMAPHORE5_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE6 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE6_APPS_NW_SEMAPHORE6_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE6_APPS_NW_SEMAPHORE6_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE7 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE7_APPS_NW_SEMAPHORE7_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE7_APPS_NW_SEMAPHORE7_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE8 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE8_APPS_NW_SEMAPHORE8_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE8_APPS_NW_SEMAPHORE8_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE9 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE9_APPS_NW_SEMAPHORE9_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE9_APPS_NW_SEMAPHORE9_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE10 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE10_APPS_NW_SEMAPHORE10_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE10_APPS_NW_SEMAPHORE10_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE11 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE11_APPS_NW_SEMAPHORE11_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE11_APPS_NW_SEMAPHORE11_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE12 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE12_APPS_NW_SEMAPHORE12_M \
0xFFFFFFFF // APPS NW semaphore register - not
// reflected in status.
#define COMMON_REG_APPS_NW_SEMAPHORE12_APPS_NW_SEMAPHORE12_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_SEMAPPHORE_PEND register.
//
//******************************************************************************
#define COMMON_REG_APPS_SEMAPPHORE_PEND_APPS_SEMAPPHORE_PEND_M \
0xFFFFFFFF // APPS SEMAPOHORE STATUS
#define COMMON_REG_APPS_SEMAPPHORE_PEND_APPS_SEMAPPHORE_PEND_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NW_SEMAPPHORE_PEND register.
//
//******************************************************************************
#define COMMON_REG_NW_SEMAPPHORE_PEND_NW_SEMAPPHORE_PEND_M \
0xFFFFFFFF // NW SEMAPHORE STATUS
#define COMMON_REG_NW_SEMAPPHORE_PEND_NW_SEMAPPHORE_PEND_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_SEMAPHORE_STATUS register.
//
//******************************************************************************
#define COMMON_REG_SEMAPHORE_STATUS_SEMAPHORE_STATUS_M \
0xFFFFFFFF // SEMAPHORE STATUS 9:8 :semaphore
// status of flash_control 7:6
// :semaphore status of
// gpio_properties 5:4
// :semaphore status of
// spi_propertie 1:0 :semaphore
// status of i2c_propertie
#define COMMON_REG_SEMAPHORE_STATUS_SEMAPHORE_STATUS_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_IDMEM_TIM_Update register.
//
//******************************************************************************
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_FPGA_ROM_WR_EN register.
//
//******************************************************************************
#define COMMON_REG_FPGA_ROM_WR_EN_FPGA_ROM_WR_EN \
0x00000001 // when '1' enables Write into
// IDMEM CORE ROM, APPS ROM, NWP ROM
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NW_INT_MASK register.
//
//******************************************************************************
#define COMMON_REG_NW_INT_MASK_NW_INT_MASK_M \
0xFFFFFFFF // 1= disable corresponding
// interrupt;0 = interrupt enabled
#define COMMON_REG_NW_INT_MASK_NW_INT_MASK_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NW_INT_MASK_SET register.
//
//******************************************************************************
#define COMMON_REG_NW_INT_MASK_SET_NW_INT_MASK_SET_M \
0xFFFFFFFF // write 1 to set corresponding bit
// in NW_INT_MASK;0 = no effect
#define COMMON_REG_NW_INT_MASK_SET_NW_INT_MASK_SET_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NW_INT_MASK_CLR register.
//
//******************************************************************************
#define COMMON_REG_NW_INT_MASK_CLR_NW_INT_MASK_CLR_M \
0xFFFFFFFF // write 1 to clear corresponding
// bit in NW_INT_MASK;0 = no effect
#define COMMON_REG_NW_INT_MASK_CLR_NW_INT_MASK_CLR_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NW_INT_STS_CLR register.
//
//******************************************************************************
#define COMMON_REG_NW_INT_STS_CLR_NW_INT_STS_CLR_M \
0xFFFFFFFF // write 1 to clear corresponding
// interrupt; 0 = no effect;
// interrupt is not lost if coincide
// with write operation
#define COMMON_REG_NW_INT_STS_CLR_NW_INT_STS_CLR_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NW_INT_ACK register.
//
//******************************************************************************
#define COMMON_REG_NW_INT_ACK_NW_INT_ACK_M \
0xFFFFFFFF // write 1 to clear corresponding
// interrupt;0 = no effect
#define COMMON_REG_NW_INT_ACK_NW_INT_ACK_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NW_INT_TRIG register.
//
//******************************************************************************
#define COMMON_REG_NW_INT_TRIG_NW_INT_TRIG_M \
0xFFFFFFFF // Writing a 1 to a bit in this
// register causes the the Host CPU
// if enabled (not masked). This
// register is self-clearing.
// Writing 0 has no effect
#define COMMON_REG_NW_INT_TRIG_NW_INT_TRIG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NW_INT_STS_MASKED register.
//
//******************************************************************************
#define COMMON_REG_NW_INT_STS_MASKED_NW_INT_STS_MASKED_M \
0xFFFFFFFF // 1= corresponding interrupt is
// active and not masked. read is
// non-destructive;0 = corresponding
// interrupt is inactive or masked
// by NW_INT mask
#define COMMON_REG_NW_INT_STS_MASKED_NW_INT_STS_MASKED_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NW_INT_STS_RAW register.
//
//******************************************************************************
#define COMMON_REG_NW_INT_STS_RAW_NW_INT_STS_RAW_M \
0xFFFFFFFF // 1= corresponding interrupt is
// active. read is non-destructive;0
// = corresponding interrupt is
// inactive
#define COMMON_REG_NW_INT_STS_RAW_NW_INT_STS_RAW_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_INT_MASK register.
//
//******************************************************************************
#define COMMON_REG_APPS_INT_MASK_APPS_INT_MASK_M \
0xFFFFFFFF // 1= disable corresponding
// interrupt;0 = interrupt enabled
#define COMMON_REG_APPS_INT_MASK_APPS_INT_MASK_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_INT_MASK_SET register.
//
//******************************************************************************
#define COMMON_REG_APPS_INT_MASK_SET_APPS_INT_MASK_SET_M \
0xFFFFFFFF // write 1 to set corresponding bit
// in APPS_INT_MASK;0 = no effect
#define COMMON_REG_APPS_INT_MASK_SET_APPS_INT_MASK_SET_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_INT_MASK_CLR register.
//
//******************************************************************************
#define COMMON_REG_APPS_INT_MASK_CLR_APPS_INT_MASK_CLR_M \
0xFFFFFFFF // write 1 to clear corresponding
// bit in APPS_INT_MASK;0 = no
// effect
#define COMMON_REG_APPS_INT_MASK_CLR_APPS_INT_MASK_CLR_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_INT_STS_CLR register.
//
//******************************************************************************
#define COMMON_REG_APPS_INT_STS_CLR_APPS_INT_STS_CLR_M \
0xFFFFFFFF // write 1 to clear corresponding
// interrupt; 0 = no effect;
// interrupt is not lost if coincide
// with write operation
#define COMMON_REG_APPS_INT_STS_CLR_APPS_INT_STS_CLR_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_INT_ACK register.
//
//******************************************************************************
#define COMMON_REG_APPS_INT_ACK_APPS_INT_ACK_M \
0xFFFFFFFF // write 1 to clear corresponding
// interrupt;0 = no effect
#define COMMON_REG_APPS_INT_ACK_APPS_INT_ACK_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_INT_TRIG register.
//
//******************************************************************************
#define COMMON_REG_APPS_INT_TRIG_APPS_INT_TRIG_M \
0xFFFFFFFF // Writing a 1 to a bit in this
// register causes the the Host CPU
// if enabled (not masked). This
// register is self-clearing.
// Writing 0 has no effect
#define COMMON_REG_APPS_INT_TRIG_APPS_INT_TRIG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_INT_STS_MASKED register.
//
//******************************************************************************
#define COMMON_REG_APPS_INT_STS_MASKED_APPS_INT_STS_MASKED_M \
0xFFFFFFFF // 1= corresponding interrupt is
// active and not masked. read is
// non-destructive;0 = corresponding
// interrupt is inactive or masked
// by APPS_INT mask
#define COMMON_REG_APPS_INT_STS_MASKED_APPS_INT_STS_MASKED_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_INT_STS_RAW register.
//
//******************************************************************************
#define COMMON_REG_APPS_INT_STS_RAW_APPS_INT_STS_RAW_M \
0xFFFFFFFF // 1= corresponding interrupt is
// active. read is non-destructive;0
// = corresponding interrupt is
// inactive
#define COMMON_REG_APPS_INT_STS_RAW_APPS_INT_STS_RAW_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_IDMEM_TIM_Updated register.
//
//******************************************************************************
#define COMMON_REG_IDMEM_TIM_Updated_TIM_UPDATED \
0x00000001 // toggle in this signal
// indicatesIDMEM_TIM_UPDATE
// register mentioned above is
// updated.
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_GPIO_TRIG_EN register.
//
//******************************************************************************
#define COMMON_REG_APPS_GPIO_TRIG_EN_APPS_GPIO_TRIG_EN_M \
0x0000001F // APPS GPIO Trigger EN control.
// Bit 0: when '1' enable GPIO 0
// trigger. This bit enables trigger
// for all GPIO 0 pins (GPIO 0 to
// GPIO7). Bit 1: when '1' enable
// GPIO 1 trigger. This bit enables
// trigger for all GPIO 1 pins (
// GPIO8 to GPIO15). Bit 2: when '1'
// enable GPIO 2 trigger. This bit
// enables trigger for all GPIO 2
// pins (GPIO16 to GPIO23). Bit 3:
// when '1' enable GPIO 3 trigger.
// This bit enables trigger for all
// GPIO 3 pins (GPIO24 to GPIO31).
// Bit 4: when '1' enable GPIO 4
// trigger. This bit enables trigger
// for all GPIO 4 pins.(GPIO32 to
// GPIO39)
#define COMMON_REG_APPS_GPIO_TRIG_EN_APPS_GPIO_TRIG_EN_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_EMU_DEBUG_REG register.
//
//******************************************************************************
#define COMMON_REG_EMU_DEBUG_REG_EMU_DEBUG_REG_M \
0xFFFFFFFF // 0 th bit used for stalling APPS
// DMA and 1st bit is used for
// stalling NWP DMA for debug
// purpose. Other bits are unused.
#define COMMON_REG_EMU_DEBUG_REG_EMU_DEBUG_REG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_SEMAPHORE_STATUS2 register.
//
//******************************************************************************
#define COMMON_REG_SEMAPHORE_STATUS2_SEMPAPHORE_STATUS2_M \
0x00FFFFFF // SEMAPHORE STATUS 23:22
// :semaphore status of
// apps_nw_semaphore11 21:20
// :semaphore status of
// apps_nw_semaphore11 19:18
// :semaphore status of
// apps_nw_semaphore10 17:16
// :semaphore status of
// apps_nw_semaphore9 15:14
// :semaphore status of
// apps_nw_semaphore8 13:12
// :semaphore status of
// apps_nw_semaphore7 11:10
// :semaphore status of
// apps_nw_semaphore6 9:8 :semaphore
// status of apps_nw_semaphore5 7:6
// :semaphore status of
// apps_nw_semaphore4 5:4 :semaphore
// status of apps_nw_semaphore3 3:2
// :semaphore status of
// apps_nw_semaphore2 1:0 :semaphore
// status of apps_nw_semaphore1
#define COMMON_REG_SEMAPHORE_STATUS2_SEMPAPHORE_STATUS2_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_SEMAPHORE_PREV_OWNER1 register.
//
//******************************************************************************
#define COMMON_REG_SEMAPHORE_PREV_OWNER1_SEMAPHORE_PREV_OWNER1_M \
0x0003FFFF // 1:0 : prvious owner of
// i2c_properties_reg[1:0] 3:2 :
// prvious owner of
// spi_properties_reg[1:0] 5:4 :
// prvious owner of
// gpio_properties_reg[1:0] 9:8 :
// prvious owner of
// gpio_properties_reg[3:2] 11:10 :
// prvious owner of
// gpio_properties_reg[5:4] 13:12 :
// prvious owner of
// gpio_properties_reg[7:6] 15:14 :
// prvious owner of
// gpio_properties_reg[9:8] 17:16 :
// prvious owner of
// flash_control_reg[1:0]
#define COMMON_REG_SEMAPHORE_PREV_OWNER1_SEMAPHORE_PREV_OWNER1_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_SEMAPHORE_PREV_OWNER2 register.
//
//******************************************************************************
#define COMMON_REG_SEMAPHORE_PREV_OWNER2_SEMAPHORE_PREV_OWNER2_M \
0x00FFFFFF // 1:0 : previous owner of
// apps_nw_semaphore1_reg[1:0] 3:2 :
// previous owner of
// apps_nw_semaphore2_reg[1:0] 5:4 :
// previous owner of
// apps_nw_semaphore3_reg[1:0] 7:6 :
// previous owner of
// apps_nw_semaphore4_reg[1:0] 9:8 :
// previous owner of
// apps_nw_semaphore5_reg[1:0] 11:10
// : previous owner of
// apps_nw_semaphore6_reg[1:0] 13:12
// : previous owner of
// apps_nw_semaphore7_reg[1:0] 15:14
// : previous owner of
// apps_nw_semaphore8_reg[1:0] 17:16
// : previous owner of
// apps_nw_semaphore9_reg[1:0] 19:18
// : previous owner of
// apps_nw_semaphore10_reg[1:0]
// 21:20 : previous owner of
// apps_nw_semaphore11_reg[1:0]
// 23:22 : previous owner of
// apps_nw_semaphore12_reg[1:0]
#define COMMON_REG_SEMAPHORE_PREV_OWNER2_SEMAPHORE_PREV_OWNER2_S 0
#endif // __HW_COMMON_REG_H__