2014-03-12 06:55:41 +00:00
/**
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* @ file stm32f4xx_hal_rtc . h
* @ author MCD Application Team
2014-08-06 22:33:31 +01:00
* @ version V1 .1 .0
* @ date 19 - June - 2014
2014-03-12 06:55:41 +00:00
* @ brief Header file of RTC HAL module .
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* @ attention
*
* < h2 > < center > & copy ; COPYRIGHT ( c ) 2014 STMicroelectronics < / center > < / h2 >
*
* Redistribution and use in source and binary forms , with or without modification ,
* are permitted provided that the following conditions are met :
* 1. Redistributions of source code must retain the above copyright notice ,
* this list of conditions and the following disclaimer .
* 2. Redistributions in binary form must reproduce the above copyright notice ,
* this list of conditions and the following disclaimer in the documentation
* and / or other materials provided with the distribution .
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission .
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS " AS IS "
* AND ANY EXPRESS OR IMPLIED WARRANTIES , INCLUDING , BUT NOT LIMITED TO , THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED . IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT , INDIRECT , INCIDENTAL , SPECIAL , EXEMPLARY , OR CONSEQUENTIAL
* DAMAGES ( INCLUDING , BUT NOT LIMITED TO , PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES ; LOSS OF USE , DATA , OR PROFITS ; OR BUSINESS INTERRUPTION ) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY , WHETHER IN CONTRACT , STRICT LIABILITY ,
* OR TORT ( INCLUDING NEGLIGENCE OR OTHERWISE ) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE , EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE .
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
/* Define to prevent recursive inclusion -------------------------------------*/
# ifndef __STM32F4xx_HAL_RTC_H
# define __STM32F4xx_HAL_RTC_H
# ifdef __cplusplus
extern " C " {
# endif
/* Includes ------------------------------------------------------------------*/
# include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @ {
*/
/** @addtogroup RTC
* @ {
*/
/* Exported types ------------------------------------------------------------*/
/**
* @ brief HAL State structures definition
*/
typedef enum
{
HAL_RTC_STATE_RESET = 0x00 , /*!< RTC not yet initialized or disabled */
HAL_RTC_STATE_READY = 0x01 , /*!< RTC initialized and ready for use */
HAL_RTC_STATE_BUSY = 0x02 , /*!< RTC process is ongoing */
HAL_RTC_STATE_TIMEOUT = 0x03 , /*!< RTC timeout state */
HAL_RTC_STATE_ERROR = 0x04 /*!< RTC error state */
} HAL_RTCStateTypeDef ;
/**
* @ brief RTC Configuration Structure definition
*/
typedef struct
{
uint32_t HourFormat ; /*!< Specifies the RTC Hour Format.
This parameter can be a value of @ ref RTC_Hour_Formats */
uint32_t AsynchPrediv ; /*!< Specifies the RTC Asynchronous Predivider value.
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */
uint32_t SynchPrediv ; /*!< Specifies the RTC Synchronous Predivider value.
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF */
uint32_t OutPut ; /*!< Specifies which signal will be routed to the RTC output.
This parameter can be a value of @ ref RTC_Output_selection_Definitions */
uint32_t OutPutPolarity ; /*!< Specifies the polarity of the output signal.
This parameter can be a value of @ ref RTC_Output_Polarity_Definitions */
uint32_t OutPutType ; /*!< Specifies the RTC Output Pin mode.
This parameter can be a value of @ ref RTC_Output_Type_ALARM_OUT */
} RTC_InitTypeDef ;
/**
* @ brief RTC Time structure definition
*/
typedef struct
{
uint8_t Hours ; /*!< Specifies the RTC Time Hour.
2014-08-06 22:33:31 +01:00
This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected .
2014-03-12 06:55:41 +00:00
This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */
uint8_t Minutes ; /*!< Specifies the RTC Time Minutes.
This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
uint8_t Seconds ; /*!< Specifies the RTC Time Seconds.
This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
uint32_t SubSeconds ; /*!< Specifies the RTC Time SubSeconds.
This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
uint8_t TimeFormat ; /*!< Specifies the RTC AM/PM Time.
This parameter can be a value of @ ref RTC_AM_PM_Definitions */
2014-08-06 22:33:31 +01:00
uint32_t DayLightSaving ; /*!< Specifies DayLight Save Operation.
2014-03-12 06:55:41 +00:00
This parameter can be a value of @ ref RTC_DayLightSaving_Definitions */
uint32_t StoreOperation ; /*!< Specifies RTC_StoreOperation value to be written in the BCK bit
in CR register to store the operation .
This parameter can be a value of @ ref RTC_StoreOperation_Definitions */
} RTC_TimeTypeDef ;
/**
* @ brief RTC Date structure definition
*/
typedef struct
{
uint8_t WeekDay ; /*!< Specifies the RTC Date WeekDay.
This parameter can be a value of @ ref RTC_WeekDay_Definitions */
uint8_t Month ; /*!< Specifies the RTC Date Month (in BCD format).
This parameter can be a value of @ ref RTC_Month_Date_Definitions */
uint8_t Date ; /*!< Specifies the RTC Date.
This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
uint8_t Year ; /*!< Specifies the RTC Date Year.
This parameter must be a number between Min_Data = 0 and Max_Data = 99 */
} RTC_DateTypeDef ;
/**
* @ brief RTC Alarm structure definition
*/
typedef struct
{
RTC_TimeTypeDef AlarmTime ; /*!< Specifies the RTC Alarm Time members */
uint32_t AlarmMask ; /*!< Specifies the RTC Alarm Masks.
This parameter can be a value of @ ref RTC_AlarmMask_Definitions */
uint32_t AlarmSubSecondMask ; /*!< Specifies the RTC Alarm SubSeconds Masks.
This parameter can be a value of @ ref RTC_Alarm_Sub_Seconds_Masks_Definitions */
uint32_t AlarmDateWeekDaySel ; /*!< Specifies the RTC Alarm is on Date or WeekDay.
This parameter can be a value of @ ref RTC_AlarmDateWeekDay_Definitions */
uint8_t AlarmDateWeekDay ; /*!< Specifies the RTC Alarm Date/WeekDay.
If the Alarm Date is selected , this parameter must be set to a value in the 1 - 31 range .
If the Alarm WeekDay is selected , this parameter can be a value of @ ref RTC_WeekDay_Definitions */
uint32_t Alarm ; /*!< Specifies the alarm .
This parameter can be a value of @ ref RTC_Alarms_Definitions */
} RTC_AlarmTypeDef ;
/**
* @ brief Time Handle Structure definition
*/
typedef struct
{
RTC_TypeDef * Instance ; /*!< Register base address */
RTC_InitTypeDef Init ; /*!< RTC required parameters */
HAL_LockTypeDef Lock ; /*!< RTC locking object */
__IO HAL_RTCStateTypeDef State ; /*!< Time communication state */
} RTC_HandleTypeDef ;
/* Exported constants --------------------------------------------------------*/
/** @defgroup RTC_Exported_Constants
* @ {
*/
/* Masks Definition */
# define RTC_TR_RESERVED_MASK ((uint32_t)0x007F7F7F)
# define RTC_DR_RESERVED_MASK ((uint32_t)0x00FFFF3F)
# define RTC_INIT_MASK ((uint32_t)0xFFFFFFFF)
# define RTC_RSF_MASK ((uint32_t)0xFFFFFF5F)
# define RTC_FLAGS_MASK ((uint32_t)(RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \
RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | RTC_FLAG_INITF | \
RTC_FLAG_RSF | RTC_FLAG_INITS | RTC_FLAG_WUTWF | \
RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF | RTC_FLAG_TAMP1F | \
RTC_FLAG_RECALPF | RTC_FLAG_SHPF ) )
# define RTC_TIMEOUT_VALUE 1000
/** @defgroup RTC_Hour_Formats
* @ {
*/
# define RTC_HOURFORMAT_24 ((uint32_t)0x00000000)
# define RTC_HOURFORMAT_12 ((uint32_t)0x00000040)
# define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \
( ( FORMAT ) = = RTC_HOURFORMAT_24 ) )
/**
* @ }
*/
/** @defgroup RTC_Output_selection_Definitions
* @ {
*/
# define RTC_OUTPUT_DISABLE ((uint32_t)0x00000000)
# define RTC_OUTPUT_ALARMA ((uint32_t)0x00200000)
# define RTC_OUTPUT_ALARMB ((uint32_t)0x00400000)
# define RTC_OUTPUT_WAKEUP ((uint32_t)0x00600000)
# define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
( ( OUTPUT ) = = RTC_OUTPUT_ALARMA ) | | \
( ( OUTPUT ) = = RTC_OUTPUT_ALARMB ) | | \
( ( OUTPUT ) = = RTC_OUTPUT_WAKEUP ) )
/**
* @ }
*/
/** @defgroup RTC_Output_Polarity_Definitions
* @ {
*/
# define RTC_OUTPUT_POLARITY_HIGH ((uint32_t)0x00000000)
# define RTC_OUTPUT_POLARITY_LOW ((uint32_t)0x00100000)
# define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \
( ( POL ) = = RTC_OUTPUT_POLARITY_LOW ) )
/**
* @ }
*/
/** @defgroup RTC_Output_Type_ALARM_OUT
* @ {
*/
# define RTC_OUTPUT_TYPE_OPENDRAIN ((uint32_t)0x00000000)
# define RTC_OUTPUT_TYPE_PUSHPULL ((uint32_t)0x00040000)
# define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \
( ( TYPE ) = = RTC_OUTPUT_TYPE_PUSHPULL ) )
/**
* @ }
*/
/** @defgroup RTC_Asynchronous_Predivider
* @ {
*/
# define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7F)
/**
* @ }
*/
/** @defgroup RTC_Synchronous_Predivider
* @ {
*/
# define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7FFF)
/**
* @ }
*/
/** @defgroup RTC_Time_Definitions
* @ {
*/
# define IS_RTC_HOUR12(HOUR) (((HOUR) > (uint32_t)0) && ((HOUR) <= (uint32_t)12))
# define IS_RTC_HOUR24(HOUR) ((HOUR) <= (uint32_t)23)
# define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= (uint32_t)59)
# define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= (uint32_t)59)
/**
* @ }
*/
/** @defgroup RTC_AM_PM_Definitions
* @ {
*/
# define RTC_HOURFORMAT12_AM ((uint8_t)0x00)
# define RTC_HOURFORMAT12_PM ((uint8_t)0x40)
# define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || ((PM) == RTC_HOURFORMAT12_PM))
/**
* @ }
*/
/** @defgroup RTC_DayLightSaving_Definitions
* @ {
*/
# define RTC_DAYLIGHTSAVING_SUB1H ((uint32_t)0x00020000)
# define RTC_DAYLIGHTSAVING_ADD1H ((uint32_t)0x00010000)
# define RTC_DAYLIGHTSAVING_NONE ((uint32_t)0x00000000)
# define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \
( ( SAVE ) = = RTC_DAYLIGHTSAVING_ADD1H ) | | \
( ( SAVE ) = = RTC_DAYLIGHTSAVING_NONE ) )
/**
* @ }
*/
/** @defgroup RTC_StoreOperation_Definitions
* @ {
*/
# define RTC_STOREOPERATION_RESET ((uint32_t)0x00000000)
# define RTC_STOREOPERATION_SET ((uint32_t)0x00040000)
# define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \
( ( OPERATION ) = = RTC_STOREOPERATION_SET ) )
/**
* @ }
*/
/** @defgroup RTC_Input_parameter_format_definitions
* @ {
*/
# define FORMAT_BIN ((uint32_t)0x000000000)
# define FORMAT_BCD ((uint32_t)0x000000001)
# define IS_RTC_FORMAT(FORMAT) (((FORMAT) == FORMAT_BIN) || ((FORMAT) == FORMAT_BCD))
/**
* @ }
*/
/** @defgroup RTC_Year_Date_Definitions
* @ {
*/
# define IS_RTC_YEAR(YEAR) ((YEAR) <= (uint32_t)99)
/**
* @ }
*/
/** @defgroup RTC_Month_Date_Definitions
* @ {
*/
/* Coded in BCD format */
# define RTC_MONTH_JANUARY ((uint8_t)0x01)
# define RTC_MONTH_FEBRUARY ((uint8_t)0x02)
# define RTC_MONTH_MARCH ((uint8_t)0x03)
# define RTC_MONTH_APRIL ((uint8_t)0x04)
# define RTC_MONTH_MAY ((uint8_t)0x05)
# define RTC_MONTH_JUNE ((uint8_t)0x06)
# define RTC_MONTH_JULY ((uint8_t)0x07)
# define RTC_MONTH_AUGUST ((uint8_t)0x08)
# define RTC_MONTH_SEPTEMBER ((uint8_t)0x09)
# define RTC_MONTH_OCTOBER ((uint8_t)0x10)
# define RTC_MONTH_NOVEMBER ((uint8_t)0x11)
# define RTC_MONTH_DECEMBER ((uint8_t)0x12)
# define IS_RTC_MONTH(MONTH) (((MONTH) >= (uint32_t)1) && ((MONTH) <= (uint32_t)12))
# define IS_RTC_DATE(DATE) (((DATE) >= (uint32_t)1) && ((DATE) <= (uint32_t)31))
/**
* @ }
*/
/** @defgroup RTC_WeekDay_Definitions
* @ {
*/
# define RTC_WEEKDAY_MONDAY ((uint8_t)0x01)
# define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02)
# define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03)
# define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04)
# define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05)
# define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06)
# define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07)
# define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
( ( WEEKDAY ) = = RTC_WEEKDAY_TUESDAY ) | | \
( ( WEEKDAY ) = = RTC_WEEKDAY_WEDNESDAY ) | | \
( ( WEEKDAY ) = = RTC_WEEKDAY_THURSDAY ) | | \
( ( WEEKDAY ) = = RTC_WEEKDAY_FRIDAY ) | | \
( ( WEEKDAY ) = = RTC_WEEKDAY_SATURDAY ) | | \
( ( WEEKDAY ) = = RTC_WEEKDAY_SUNDAY ) )
/**
* @ }
*/
/** @defgroup RTC_Alarm_Definitions
* @ {
*/
# define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) >(uint32_t) 0) && ((DATE) <= (uint32_t)31))
# define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
( ( WEEKDAY ) = = RTC_WEEKDAY_TUESDAY ) | | \
( ( WEEKDAY ) = = RTC_WEEKDAY_WEDNESDAY ) | | \
( ( WEEKDAY ) = = RTC_WEEKDAY_THURSDAY ) | | \
( ( WEEKDAY ) = = RTC_WEEKDAY_FRIDAY ) | | \
( ( WEEKDAY ) = = RTC_WEEKDAY_SATURDAY ) | | \
( ( WEEKDAY ) = = RTC_WEEKDAY_SUNDAY ) )
/**
* @ }
*/
/** @defgroup RTC_AlarmDateWeekDay_Definitions
* @ {
*/
# define RTC_ALARMDATEWEEKDAYSEL_DATE ((uint32_t)0x00000000)
# define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY ((uint32_t)0x40000000)
# define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \
( ( SEL ) = = RTC_ALARMDATEWEEKDAYSEL_WEEKDAY ) )
/**
* @ }
*/
/** @defgroup RTC_AlarmMask_Definitions
* @ {
*/
# define RTC_ALARMMASK_NONE ((uint32_t)0x00000000)
# define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4
# define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3
# define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2
# define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1
# define RTC_ALARMMASK_ALL ((uint32_t)0x80808080)
# define IS_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7F) == (uint32_t)RESET)
/**
* @ }
*/
/** @defgroup RTC_Alarms_Definitions
* @ {
*/
# define RTC_ALARM_A RTC_CR_ALRAE
# define RTC_ALARM_B RTC_CR_ALRBE
# define IS_ALARM(ALARM) (((ALARM) == RTC_ALARM_A) || ((ALARM) == RTC_ALARM_B))
/**
* @ }
*/
/** @defgroup RTC_Alarm_Sub_Seconds_Value
* @ {
*/
# define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= (uint32_t)0x00007FFF)
/**
* @ }
*/
/** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions
* @ {
*/
# define RTC_ALARMSUBSECONDMASK_ALL ((uint32_t)0x00000000) / *!< All Alarm SS fields are masked.
There is no comparison on sub seconds
for Alarm */
# define RTC_ALARMSUBSECONDMASK_SS14_1 ((uint32_t)0x01000000) / *!< SS[14:1] are don't care in Alarm
comparison . Only SS [ 0 ] is compared . */
# define RTC_ALARMSUBSECONDMASK_SS14_2 ((uint32_t)0x02000000) / *!< SS[14:2] are don't care in Alarm
comparison . Only SS [ 1 : 0 ] are compared */
# define RTC_ALARMSUBSECONDMASK_SS14_3 ((uint32_t)0x03000000) / *!< SS[14:3] are don't care in Alarm
comparison . Only SS [ 2 : 0 ] are compared */
# define RTC_ALARMSUBSECONDMASK_SS14_4 ((uint32_t)0x04000000) / *!< SS[14:4] are don't care in Alarm
comparison . Only SS [ 3 : 0 ] are compared */
# define RTC_ALARMSUBSECONDMASK_SS14_5 ((uint32_t)0x05000000) / *!< SS[14:5] are don't care in Alarm
comparison . Only SS [ 4 : 0 ] are compared */
# define RTC_ALARMSUBSECONDMASK_SS14_6 ((uint32_t)0x06000000) / *!< SS[14:6] are don't care in Alarm
comparison . Only SS [ 5 : 0 ] are compared */
# define RTC_ALARMSUBSECONDMASK_SS14_7 ((uint32_t)0x07000000) / *!< SS[14:7] are don't care in Alarm
comparison . Only SS [ 6 : 0 ] are compared */
# define RTC_ALARMSUBSECONDMASK_SS14_8 ((uint32_t)0x08000000) / *!< SS[14:8] are don't care in Alarm
comparison . Only SS [ 7 : 0 ] are compared */
# define RTC_ALARMSUBSECONDMASK_SS14_9 ((uint32_t)0x09000000) / *!< SS[14:9] are don't care in Alarm
comparison . Only SS [ 8 : 0 ] are compared */
# define RTC_ALARMSUBSECONDMASK_SS14_10 ((uint32_t)0x0A000000) / *!< SS[14:10] are don't care in Alarm
comparison . Only SS [ 9 : 0 ] are compared */
# define RTC_ALARMSUBSECONDMASK_SS14_11 ((uint32_t)0x0B000000) / *!< SS[14:11] are don't care in Alarm
comparison . Only SS [ 10 : 0 ] are compared */
# define RTC_ALARMSUBSECONDMASK_SS14_12 ((uint32_t)0x0C000000) / *!< SS[14:12] are don't care in Alarm
comparison . Only SS [ 11 : 0 ] are compared */
# define RTC_ALARMSUBSECONDMASK_SS14_13 ((uint32_t)0x0D000000) / *!< SS[14:13] are don't care in Alarm
comparison . Only SS [ 12 : 0 ] are compared */
# define RTC_ALARMSUBSECONDMASK_SS14 ((uint32_t)0x0E000000) / *!< SS[14] is don't care in Alarm
comparison . Only SS [ 13 : 0 ] are compared */
# define RTC_ALARMSUBSECONDMASK_None ((uint32_t)0x0F000000) / *!< SS[14:0] are compared and must match
to activate alarm . */
# define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \
( ( MASK ) = = RTC_ALARMSUBSECONDMASK_SS14_1 ) | | \
( ( MASK ) = = RTC_ALARMSUBSECONDMASK_SS14_2 ) | | \
( ( MASK ) = = RTC_ALARMSUBSECONDMASK_SS14_3 ) | | \
( ( MASK ) = = RTC_ALARMSUBSECONDMASK_SS14_4 ) | | \
( ( MASK ) = = RTC_ALARMSUBSECONDMASK_SS14_5 ) | | \
( ( MASK ) = = RTC_ALARMSUBSECONDMASK_SS14_6 ) | | \
( ( MASK ) = = RTC_ALARMSUBSECONDMASK_SS14_7 ) | | \
( ( MASK ) = = RTC_ALARMSUBSECONDMASK_SS14_8 ) | | \
( ( MASK ) = = RTC_ALARMSUBSECONDMASK_SS14_9 ) | | \
( ( MASK ) = = RTC_ALARMSUBSECONDMASK_SS14_10 ) | | \
( ( MASK ) = = RTC_ALARMSUBSECONDMASK_SS14_11 ) | | \
( ( MASK ) = = RTC_ALARMSUBSECONDMASK_SS14_12 ) | | \
( ( MASK ) = = RTC_ALARMSUBSECONDMASK_SS14_13 ) | | \
( ( MASK ) = = RTC_ALARMSUBSECONDMASK_SS14 ) | | \
( ( MASK ) = = RTC_ALARMSUBSECONDMASK_None ) )
/**
* @ }
*/
/** @defgroup RTC_Interrupts_Definitions
* @ {
*/
# define RTC_IT_TS ((uint32_t)0x00008000)
# define RTC_IT_WUT ((uint32_t)0x00004000)
# define RTC_IT_ALRB ((uint32_t)0x00002000)
# define RTC_IT_ALRA ((uint32_t)0x00001000)
# define RTC_IT_TAMP ((uint32_t)0x00000004) /* Used only to Enable the Tamper Interrupt */
# define RTC_IT_TAMP1 ((uint32_t)0x00020000)
# define RTC_IT_TAMP2 ((uint32_t)0x00040000)
/**
* @ }
*/
/** @defgroup RTC_Flags_Definitions
* @ {
*/
# define RTC_FLAG_RECALPF ((uint32_t)0x00010000)
# define RTC_FLAG_TAMP2F ((uint32_t)0x00004000)
# define RTC_FLAG_TAMP1F ((uint32_t)0x00002000)
# define RTC_FLAG_TSOVF ((uint32_t)0x00001000)
# define RTC_FLAG_TSF ((uint32_t)0x00000800)
# define RTC_FLAG_WUTF ((uint32_t)0x00000400)
# define RTC_FLAG_ALRBF ((uint32_t)0x00000200)
# define RTC_FLAG_ALRAF ((uint32_t)0x00000100)
# define RTC_FLAG_INITF ((uint32_t)0x00000040)
# define RTC_FLAG_RSF ((uint32_t)0x00000020)
# define RTC_FLAG_INITS ((uint32_t)0x00000010)
# define RTC_FLAG_SHPF ((uint32_t)0x00000008)
# define RTC_FLAG_WUTWF ((uint32_t)0x00000004)
# define RTC_FLAG_ALRBWF ((uint32_t)0x00000002)
# define RTC_FLAG_ALRAWF ((uint32_t)0x00000001)
/**
* @ }
*/
/**
* @ }
*/
/* Exported macro ------------------------------------------------------------*/
2014-08-06 22:33:31 +01:00
/** @brief Reset RTC handle state
* @ param __HANDLE__ : specifies the RTC handle .
* @ retval None
*/
# define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)
2014-03-12 06:55:41 +00:00
/**
* @ brief Disable the write protection for RTC registers .
* @ param __HANDLE__ : specifies the RTC handle .
* @ retval None
*/
# define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) \
do { \
( __HANDLE__ ) - > Instance - > WPR = 0xCA ; \
( __HANDLE__ ) - > Instance - > WPR = 0x53 ; \
} while ( 0 )
/**
* @ brief Enable the write protection for RTC registers .
* @ param __HANDLE__ : specifies the RTC handle .
* @ retval None
*/
# define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) \
do { \
( __HANDLE__ ) - > Instance - > WPR = 0xFF ; \
} while ( 0 )
/**
* @ brief Enable the RTC ALARMA peripheral .
* @ param __HANDLE__ : specifies the RTC handle .
* @ retval None
*/
# define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE))
/**
* @ brief Disable the RTC ALARMA peripheral .
* @ param __HANDLE__ : specifies the RTC handle .
* @ retval None
*/
# define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE))
/**
* @ brief Enable the RTC ALARMB peripheral .
* @ param __HANDLE__ : specifies the RTC handle .
* @ retval None
*/
# define __HAL_RTC_ALARMB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE))
/**
* @ brief Disable the RTC ALARMB peripheral .
* @ param __HANDLE__ : specifies the RTC handle .
* @ retval None
*/
# define __HAL_RTC_ALARMB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE))
/**
* @ brief Enable the RTC Alarm interrupt .
* @ param __HANDLE__ : specifies the RTC handle .
* @ param __INTERRUPT__ : specifies the RTC Alarm interrupt sources to be enabled or disabled .
* This parameter can be any combination of the following values :
* @ arg RTC_IT_ALRA : Alarm A interrupt
* @ arg RTC_IT_ALRB : Alarm B interrupt
* @ retval None
*/
# define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
/**
* @ brief Disable the RTC Alarm interrupt .
* @ param __HANDLE__ : specifies the RTC handle .
* @ param __INTERRUPT__ : specifies the RTC Alarm interrupt sources to be enabled or disabled .
* This parameter can be any combination of the following values :
* @ arg RTC_IT_ALRA : Alarm A interrupt
* @ arg RTC_IT_ALRB : Alarm B interrupt
* @ retval None
*/
# define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
/**
* @ brief Check whether the specified RTC Alarm interrupt has occurred or not .
* @ param __HANDLE__ : specifies the RTC handle .
* @ param __FLAG__ : specifies the RTC Alarm interrupt sources to be enabled or disabled .
* This parameter can be :
* @ arg RTC_IT_ALRA : Alarm A interrupt
* @ arg RTC_IT_ALRB : Alarm B interrupt
* @ retval None
*/
# define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __FLAG__) ((((((__HANDLE__)->Instance->ISR)& ((__FLAG__)>> 4)) & 0x0000FFFF) != RESET)? SET : RESET)
/**
* @ brief Get the selected RTC Alarm ' s flag status .
* @ param __HANDLE__ : specifies the RTC handle .
* @ param __FLAG__ : specifies the RTC Alarm Flag sources to be enabled or disabled .
* This parameter can be :
* @ arg RTC_FLAG_ALRAF
* @ arg RTC_FLAG_ALRBF
* @ arg RTC_FLAG_ALRAWF
* @ arg RTC_FLAG_ALRBWF
* @ retval None
*/
# define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
/**
* @ brief Clear the RTC Alarm ' s pending flags .
* @ param __HANDLE__ : specifies the RTC handle .
* @ param __FLAG__ : specifies the RTC Alarm Flag sources to be enabled or disabled .
* This parameter can be :
* @ arg RTC_FLAG_ALRAF
* @ arg RTC_FLAG_ALRBF
* @ retval None
*/
# define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
# define RTC_EXTI_LINE_ALARM_EVENT ((uint32_t)0x00020000) /*!< External interrupt line 17 Connected to the RTC Alarm event */
# define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
# define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to the RTC Wakeup event */
/**
* @ brief Enable the RTC Exti line .
* @ param __EXTILINE__ : specifies the RTC Exti sources to be enabled or disabled .
* This parameter can be :
2014-08-06 22:33:31 +01:00
* @ arg RTC_EXTI_LINE_ALARM_EVENT
* @ arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
* @ arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
2014-03-12 06:55:41 +00:00
* @ retval None
2014-08-06 22:33:31 +01:00
*/
# define __HAL_RTC_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__))
/* alias define maintained for legacy */
# define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT
2014-03-12 06:55:41 +00:00
/**
* @ brief Disable the RTC Exti line .
* @ param __EXTILINE__ : specifies the RTC Exti sources to be enabled or disabled .
* This parameter can be :
2014-08-06 22:33:31 +01:00
* @ arg RTC_EXTI_LINE_ALARM_EVENT
* @ arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
* @ arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
2014-03-12 06:55:41 +00:00
* @ retval None
*/
2014-08-06 22:33:31 +01:00
# define __HAL_RTC_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__))
/* alias define maintained for legacy */
# define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT
/**
* @ brief Generates a Software interrupt on selected EXTI line .
* @ param __EXTILINE__ : specifies the RTC Exti sources to be enabled or disabled .
* This parameter can be :
* @ arg RTC_EXTI_LINE_ALARM_EVENT
* @ arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
* @ arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
* @ retval None
*/
# define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
2014-03-12 06:55:41 +00:00
/**
* @ brief Clear the RTC Exti flags .
* @ param __FLAG__ : specifies the RTC Exti sources to be enabled or disabled .
* This parameter can be :
2014-08-06 22:33:31 +01:00
* @ arg RTC_EXTI_LINE_ALARM_EVENT
* @ arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
* @ arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
2014-03-12 06:55:41 +00:00
* @ retval None
*/
2014-08-06 22:33:31 +01:00
# define __HAL_RTC_EXTI_CLEAR_FLAG(__FLAG__) (EXTI->PR = (__FLAG__))
/* alias define maintained for legacy */
# define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
2014-03-12 06:55:41 +00:00
/* Include RTC HAL Extension module */
# include "stm32f4xx_hal_rtc_ex.h"
/* Exported functions --------------------------------------------------------*/
/* Initialization and de-initialization functions ****************************/
HAL_StatusTypeDef HAL_RTC_Init ( RTC_HandleTypeDef * hrtc ) ;
HAL_StatusTypeDef HAL_RTC_DeInit ( RTC_HandleTypeDef * hrtc ) ;
void HAL_RTC_MspInit ( RTC_HandleTypeDef * hrtc ) ;
void HAL_RTC_MspDeInit ( RTC_HandleTypeDef * hrtc ) ;
/* RTC Time and Date functions ************************************************/
HAL_StatusTypeDef HAL_RTC_SetTime ( RTC_HandleTypeDef * hrtc , RTC_TimeTypeDef * sTime , uint32_t Format ) ;
HAL_StatusTypeDef HAL_RTC_GetTime ( RTC_HandleTypeDef * hrtc , RTC_TimeTypeDef * sTime , uint32_t Format ) ;
HAL_StatusTypeDef HAL_RTC_SetDate ( RTC_HandleTypeDef * hrtc , RTC_DateTypeDef * sDate , uint32_t Format ) ;
HAL_StatusTypeDef HAL_RTC_GetDate ( RTC_HandleTypeDef * hrtc , RTC_DateTypeDef * sDate , uint32_t Format ) ;
/* RTC Alarm functions ********************************************************/
HAL_StatusTypeDef HAL_RTC_SetAlarm ( RTC_HandleTypeDef * hrtc , RTC_AlarmTypeDef * sAlarm , uint32_t Format ) ;
HAL_StatusTypeDef HAL_RTC_SetAlarm_IT ( RTC_HandleTypeDef * hrtc , RTC_AlarmTypeDef * sAlarm , uint32_t Format ) ;
HAL_StatusTypeDef HAL_RTC_DeactivateAlarm ( RTC_HandleTypeDef * hrtc , uint32_t Alarm ) ;
HAL_StatusTypeDef HAL_RTC_GetAlarm ( RTC_HandleTypeDef * hrtc , RTC_AlarmTypeDef * sAlarm , uint32_t Alarm , uint32_t Format ) ;
void HAL_RTC_AlarmIRQHandler ( RTC_HandleTypeDef * hrtc ) ;
HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent ( RTC_HandleTypeDef * hrtc , uint32_t Timeout ) ;
void HAL_RTC_AlarmAEventCallback ( RTC_HandleTypeDef * hrtc ) ;
/* Peripheral Control functions ***********************************************/
HAL_StatusTypeDef HAL_RTC_WaitForSynchro ( RTC_HandleTypeDef * hrtc ) ;
/* Peripheral State functions *************************************************/
HAL_RTCStateTypeDef HAL_RTC_GetState ( RTC_HandleTypeDef * hrtc ) ;
HAL_StatusTypeDef RTC_EnterInitMode ( RTC_HandleTypeDef * hrtc ) ;
uint8_t RTC_ByteToBcd2 ( uint8_t Value ) ;
uint8_t RTC_Bcd2ToByte ( uint8_t Value ) ;
/**
* @ }
*/
/**
* @ }
*/
# ifdef __cplusplus
}
# endif
# endif /* __STM32F4xx_HAL_RTC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
