mirrors
/
micropython
mirror of https://github.com/micropython/micropython.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
micropython/ports/stm32/boards/NUCLEO_H743ZI/mpconfigboard.mk

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

26 lines
590 B
Makefile
Raw Normal View History

stm32/boards/NUCLEO_H743ZI: Add config options to support mboot.
2019-04-08 05:34:37 +01:00
USE_MBOOT ?= 0
# MCU settings
stm32/boards: Add new NUCLEO_H743ZI board configuration files. USB serial and mass storage works, and the REPL is also available via the UART through the on-board ST-LINK.
2018-02-20 22:35:05 +00:00
MCU_SERIES = h7
CMSIS_MCU = STM32H743xx
MICROPY_FLOAT_IMPL = double
AF_FILE = boards/stm32h743_af.csv
stm32/boards/NUCLEO_H743ZI: Add config options to support mboot.
2019-04-08 05:34:37 +01:00
ifeq ($(USE_MBOOT),1)
stm32: Extended flash filesystem space to 512K on H743 boards. The H743 has equal sized pages of 128k, which means the filesystem doesn't need to be near the beginning. This commit moves the filesystem to the very end of flash, and extends it to 512k (4 pages). Signed-off-by: Damien George <damien@micropython.org>
2021-08-19 16:12:19 +01:00
# When using Mboot everything goes after the bootloader
LD_FILES = boards/stm32h743.ld boards/common_bl.ld
TEXT0_ADDR = 0x08020000
stm32/boards/NUCLEO_H743ZI: Add config options to support mboot.
2019-04-08 05:34:37 +01:00
else
stm32: Extended flash filesystem space to 512K on H743 boards. The H743 has equal sized pages of 128k, which means the filesystem doesn't need to be near the beginning. This commit moves the filesystem to the very end of flash, and extends it to 512k (4 pages). Signed-off-by: Damien George <damien@micropython.org>
2021-08-19 16:12:19 +01:00
# When not using Mboot everything goes at the start of flash
LD_FILES = boards/stm32h743.ld boards/common_basic.ld
stm32/boards/NUCLEO_H743ZI: Update to build with new linker management.
2018-03-28 03:20:48 +01:00
TEXT0_ADDR = 0x08000000
stm32/boards/NUCLEO_H743ZI: Add config options to support mboot.
2019-04-08 05:34:37 +01:00
endif
stm32/boards/NUCLEO_H743ZI: Add extra pins and peripheral definitions. - Corrected pin assignments and checked with CubeMX. - Added additional I2C and UARTs. - Added Ethernet interface definitions with lwIP and SSL support (but Ethernet is currently unsupported on H7 MCUs so not fully enabled).
2019-12-10 20:52:30 +00:00
# MicroPython settings
MICROPY_PY_LWIP = 1
all: Rename UMODULE to MODULE in preprocessor/Makefile vars. This work was funded through GitHub Sponsors. Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-18 06:01:26 +01:00
MICROPY_PY_SSL = 1
stm32/boards/NUCLEO_H743ZI: Add extra pins and peripheral definitions. - Corrected pin assignments and checked with CubeMX. - Added additional I2C and UARTs. - Added Ethernet interface definitions with lwIP and SSL support (but Ethernet is currently unsupported on H7 MCUs so not fully enabled).
2019-12-10 20:52:30 +00:00
MICROPY_SSL_MBEDTLS = 1
stm32/boards/NUCLEO_H743ZI: Enable VfsLfs2 on NUCLEO_H743ZI(2) boards.
2021-08-19 16:12:46 +01:00
MICROPY_VFS_LFS2 = 1
ports: Make all network-capable boards use bundle-networking. This will ensure that any board with networking support gets: - webrepl - mip - urequests - ntptime This work was funded through GitHub Sponsors. Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-01-27 03:17:19 +00:00
stm32/boards/NUCLEO_H743ZI2: Refer to NUCLEO_H743ZI for frozen manifest. Fixes build issue introduced by 6250337c9cf725238df19104f7bf801e91b56e1a Signed-off-by: Damien George <damien@micropython.org>
2023-02-01 12:22:18 +00:00
FROZEN_MANIFEST ?= $(BOARD_DIR)/manifest.py