mirrors
/
micropython
mirror of https://github.com/micropython/micropython.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
micropython/ports/mimxrt/boards/TEENSY41/mpconfigboard.mk

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

18 lines
420 B
Makefile
Raw Normal View History

mimxrt/boards: Add board configuration files for Teensy 4.1. These are at the moment more or less identical to the Teensy 4.0 files, except for the pins.csv file and the flash size.
2021-06-01 19:15:55 +01:00
MCU_SERIES = MIMXRT1062
MCU_VARIANT = MIMXRT1062DVJ6A
MICROPY_FLOAT_IMPL = double
mimxrt/sdcard: Implement SDCard driver. - Configures `PLL2->PFD0` with **198MHz** as base clock of `USDHCx` peripheral. - Adds guards for SDCard related files via `MICROPY_PY_MACHINE_SDCARD` - Adds creation of pin defines for SDCard to make-pins.py - Adds new configuration option for SDCard peripheral pinout to mpconfigport.h - Adds interrupt handling support instead of polling - Adds support for `ADMA2` powered data transfer - Configures SDCard to run in HS (high-speed mode) with **50MHz** only! SDCard support is optional and requires `USDHC` peripheral. Thus this driver is not available on `MIMXRT1010_EVK`. SDCard support is enabled by setting `MICROPY_PY_MACHINE_SDCARD = 1` in mpconfigboard.mk. Signed-off-by: Philipp Ebensberger
2021-08-01 10:20:39 +01:00
MICROPY_PY_MACHINE_SDCARD = 1
mimxrt/boards: Remove conditional assignment of flash type/size. Removes conditional assignment because respective variables should only be set in board makefile fragments. Hence no conditional assignment needed.
2022-06-23 18:00:54 +01:00
MICROPY_HW_FLASH_TYPE = qspi_nor_flash
MICROPY_HW_FLASH_SIZE = 0x800000 # 8MB
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 20:41:58 +01:00
MICROPY_HW_FLASH_RESERVED ?= 0x1000 # 4KB
mimxrt: Add support for Hyperflash chips. Hyperflash is used by the MIMXRT1050_EVKB, MIMXRT1060_EVK and MIMXRT1064_EVK boards. This commit includes: - add support for Hyperflash - modify MIMXRT1060_EVK and MIMXRT1064_EVK to change from QSPI to hyperflash. - minor incidental changes to other boards so they still build Note: Erasing a sector on the hyperflash is slow. It takes about a second, which seems too long, but matches the data sheet.
2021-07-20 07:18:18 +01:00
mimxrt/eth: Add LAN support and integrate the network module. This commit implements 10/100 Mbit Ethernet support in the mimxrt port. The following boards are configured without ETH network: - MIMXRT1010_EVK - Teensy 4.0 The following boards are configured with ETH network: - MIMXRT1020_EVK - MIMXRT1050_EVK - MIMXRT1060_EVK - MIMXRT1064_EVK - Teensy 4.1 Ethernet support tested with TEENSY 4.1, MIMRTX1020_EVK and MIMXRT1050_EVK. Build tested with Teensy 4.0 and MIMXRT1010_EVK to be still working. Compiles and builds properly for MIMXRT1060_EVK and MIMXRT1064_EVK, but not tested lacking suitable boards. Tested functions are: - ping works bothway - simple UDP transfer works bothway - ntptime works - the ftp server works - secure socker works - telnet and webrepl works The MAC address is 0x02 plus 5 bytes from the manifacturing info field, which can be considered as unique per device. Some boards do not wire the RESET and INT pin of the PHY transceiver. For operation, these are not required. If they are defined, they will be used.
2021-07-03 17:39:17 +01:00
MICROPY_PY_LWIP = 1
MICROPY_PY_USSL = 1
MICROPY_SSL_MBEDTLS = 1
ports: Make all network-capable boards use bundle-networking. This will ensure that any board with networking support gets: - webrepl - mip - urequests - ntptime This work was funded through GitHub Sponsors. Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-01-27 03:17:19 +00:00
FROZEN_MANIFEST ?= $(BOARD_DIR)/manifest.py
mimxrt/boards: Add board configuration files for Teensy 4.1. These are at the moment more or less identical to the Teensy 4.0 files, except for the pins.csv file and the flash size.
2021-06-01 19:15:55 +01:00
deploy: $(BUILD)/firmware.hex
teensy_loader_cli --mcu=imxrt1062 -v -w $<