mirrors
/
micropython
mirror of https://github.com/micropython/micropython.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
micropython/ports/mimxrt/boards/MIMXRT1010_EVK/mpconfigboard.mk

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

29 lines
843 B
Makefile
Raw Normal View History

mimxrt: Add MIMXRT1010 board.
2020-01-30 03:40:34 +00:00
MCU_SERIES = MIMXRT1011
MCU_VARIANT = MIMXRT1011DAE5A
mimxrt: Add floating point support. Since not all boards support double fp, all board specific .mk files are affected too.
2021-05-26 10:29:34 +01:00
MICROPY_FLOAT_IMPL = single
mimxrt: Add MIMXRT1010 board.
2020-01-30 03:40:34 +00:00
JLINK_PATH = /media/RT1010-EVK/
mimxrt: Implement machine.Pin class. - modified pin type from pin_obj_t to machine_pin_obj_t - created machine_pin.c - implemented basic version of make-pins.py to genertate pins.c/.h files automatically; the only alternate function currently supported is GPIO - added af.csv files for all supported MCUs - replaced pins.c/pins.h files with pin.csv for all boards - implemented on/off/high/low/value/init methods - Implemented IN/OUT/OPEN_DRAIN modes - modified LDFLAGS for DEBUG build to get usefull .elf file for debugging Signed-off-by: Philipp Ebensberger
2020-08-21 15:03:21 +01:00
JLINK_COMMANDER_SCRIPT = $(BUILD)/script.jlink
ifdef JLINK_IP
JLINK_CONNECTION_SETTINGS = -IP $(JLINK_IP)
else
JLINK_CONNECTION_SETTINGS = -USB
endif
deploy_jlink: $(BUILD)/firmware.hex
$(Q)$(TOUCH) $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "ExitOnError 1" > $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "speed auto" >> $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "r" >> $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "st" >> $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "loadfile \"$(realpath $(BUILD)/firmware.hex)\"" >> $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "qc" >> $(JLINK_COMMANDER_SCRIPT)
$(JLINK_PATH)JLinkExe -device $(MCU_VARIANT) -if SWD $(JLINK_CONNECTION_SETTINGS) -CommanderScript $(JLINK_COMMANDER_SCRIPT)
mimxrt: Add MIMXRT1010 board.
2020-01-30 03:40:34 +00:00
deploy: $(BUILD)/firmware.bin
cp $< $(JLINK_PATH)