micropython/docs/library/pyb.Pin.rst

.. _pyb.Pin:

class Pin -- control I/O pins
=============================

A pin is the basic object to control I/O pins.  It has methods to set
the mode of the pin (input, output, etc) and methods to get and set the
digital logic level. For analog control of a pin, see the ADC class.

Usage Model:

.. only:: port_pyboard

    All Board Pins are predefined as pyb.Pin.board.Name::
    
        x1_pin = pyb.Pin.board.X1
    
        g = pyb.Pin(pyb.Pin.board.X1, pyb.Pin.IN)
    
    CPU pins which correspond to the board pins are available
    as ``pyb.cpu.Name``. For the CPU pins, the names are the port letter
    followed by the pin number. On the PYBv1.0, ``pyb.Pin.board.X1`` and
    ``pyb.Pin.cpu.B6`` are the same pin.
    
    You can also use strings::
    
        g = pyb.Pin('X1', pyb.Pin.OUT_PP)
    
    Users can add their own names::
    
        MyMapperDict = { 'LeftMotorDir' : pyb.Pin.cpu.C12 }
        pyb.Pin.dict(MyMapperDict)
        g = pyb.Pin("LeftMotorDir", pyb.Pin.OUT_OD)
    
    and can query mappings::
    
        pin = pyb.Pin("LeftMotorDir")
    
    Users can also add their own mapping function::
    
        def MyMapper(pin_name):
           if pin_name == "LeftMotorDir":
               return pyb.Pin.cpu.A0
    
        pyb.Pin.mapper(MyMapper)
    
    So, if you were to call: ``pyb.Pin("LeftMotorDir", pyb.Pin.OUT_PP)``
    then ``"LeftMotorDir"`` is passed directly to the mapper function.
    
    To summarise, the following order determines how things get mapped into
    an ordinal pin number:
    
    1. Directly specify a pin object
    2. User supplied mapping function
    3. User supplied mapping (object must be usable as a dictionary key)
    4. Supply a string which matches a board pin
    5. Supply a string which matches a CPU port/pin
    
    You can set ``pyb.Pin.debug(True)`` to get some debug information about
    how a particular object gets mapped to a pin.
    
    When a pin has the ``Pin.PULL_UP`` or ``Pin.PULL_DOWN`` pull-mode enabled,
    that pin has an effective 40k Ohm resistor pulling it to 3V3 or GND
    respectively (except pin Y5 which has 11k Ohm resistors).

    Now every time a falling edge is seen on the gpio pin, the callback will be
    executed. Caution: mechanical push buttons have "bounce" and pushing or
    releasing a switch will often generate multiple edges.
    See: http://www.eng.utah.edu/~cs5780/debouncing.pdf for a detailed
    explanation, along with various techniques for debouncing.

    All pin objects go through the pin mapper to come up with one of the
    gpio pins.

Constructors
------------

.. class:: pyb.Pin(id, ...)

   Create a new Pin object associated with the id.  If additional arguments are given,
   they are used to initialise the pin.  See :meth:`pin.init`.

.. only:: port_pyboard

    Class methods
    -------------
    
    .. method:: Pin.af_list()
    
       Returns an array of alternate functions available for this pin.
    
    .. method:: Pin.debug([state])
    
       Get or set the debugging state (``True`` or ``False`` for on or off).
    
    .. method:: Pin.dict([dict])
    
       Get or set the pin mapper dictionary.
    
    .. method:: Pin.mapper([fun])
    
       Get or set the pin mapper function.


Methods
-------

.. only:: port_pyboard

    .. method:: pin.init(mode, pull=Pin.PULL_NONE, af=-1)
    
       Initialise the pin:
       
         - ``mode`` can be one of:

            - ``Pin.IN`` - configure the pin for input;
            - ``Pin.OUT_PP`` - configure the pin for output, with push-pull control;
            - ``Pin.OUT_OD`` - configure the pin for output, with open-drain control;
            - ``Pin.AF_PP`` - configure the pin for alternate function, pull-pull;
            - ``Pin.AF_OD`` - configure the pin for alternate function, open-drain;
            - ``Pin.ANALOG`` - configure the pin for analog.

         - ``pull`` can be one of:

            - ``Pin.PULL_NONE`` - no pull up or down resistors;
            - ``Pin.PULL_UP`` - enable the pull-up resistor;
            - ``Pin.PULL_DOWN`` - enable the pull-down resistor.

         - when mode is ``Pin.AF_PP`` or ``Pin.AF_OD``, then af can be the index or name
           of one of the alternate functions associated with a pin.
       
       Returns: ``None``.

.. method:: pin.value([value])

   Get or set the digital logic level of the pin:

     - With no argument, return 0 or 1 depending on the logic level of the pin.
     - With ``value`` given, set the logic level of the pin.  ``value`` can be
       anything that converts to a boolean.  If it converts to ``True``, the pin
       is set high, otherwise it is set low.

.. only:: port_pyboard

    .. method:: pin.__str__()
    
       Return a string describing the pin object.
    
    .. method:: pin.af()
    
       Returns the currently configured alternate-function of the pin. The
       integer returned will match one of the allowed constants for the af
       argument to the init function.
    
    .. method:: pin.gpio()
    
       Returns the base address of the GPIO block associated with this pin.
    
    .. method:: pin.mode()
    
       Returns the currently configured mode of the pin. The integer returned
       will match one of the allowed constants for the mode argument to the init
       function.
    
    .. method:: pin.name()

       Get the pin name.

    .. method:: pin.names()
    
       Returns the cpu and board names for this pin.
    
    .. method:: pin.pin()
    
       Get the pin number.
    
    .. method:: pin.port()
    
       Get the pin port.
    
.. method:: pin.pull()

    Returns the currently configured pull of the pin. The integer returned
    will match one of the allowed constants for the pull argument to the init
    function.

Constants
---------

.. only:: port_pyboard

    .. data:: Pin.AF_OD
    
       initialise the pin to alternate-function mode with an open-drain drive
    
    .. data:: Pin.AF_PP
    
       initialise the pin to alternate-function mode with a push-pull drive
    
    .. data:: Pin.ANALOG
    
       initialise the pin to analog mode
    
    .. data:: Pin.IN
    
       initialise the pin to input mode
    
    .. data:: Pin.OUT_OD
    
       initialise the pin to output mode with an open-drain drive
    
    .. data:: Pin.OUT_PP
    
       initialise the pin to output mode with a push-pull drive
    
    .. data:: Pin.PULL_DOWN
    
       enable the pull-down resistor on the pin
    
    .. data:: Pin.PULL_NONE
    
       don't enable any pull up or down resistors on the pin
    
    .. data:: Pin.PULL_UP
    
       enable the pull-up resistor on the pin

.. only:: port_pyboard

    class PinAF -- Pin Alternate Functions
    ======================================
    
    A Pin represents a physical pin on the microcprocessor. Each pin
    can have a variety of functions (GPIO, I2C SDA, etc). Each PinAF
    object represents a particular function for a pin.
    
    Usage Model::
    
        x3 = pyb.Pin.board.X3
        x3_af = x3.af_list()
    
    x3_af will now contain an array of PinAF objects which are availble on
    pin X3.
    
    For the pyboard, x3_af would contain:
        [Pin.AF1_TIM2, Pin.AF2_TIM5, Pin.AF3_TIM9, Pin.AF7_USART2]
    
    Normally, each peripheral would configure the af automatically, but sometimes
    the same function is available on multiple pins, and having more control
    is desired.
    
    To configure X3 to expose TIM2_CH3, you could use::
    
       pin = pyb.Pin(pyb.Pin.board.X3, mode=pyb.Pin.AF_PP, af=pyb.Pin.AF1_TIM2)
    
    or::
    
       pin = pyb.Pin(pyb.Pin.board.X3, mode=pyb.Pin.AF_PP, af=1)

    Methods
    -------
    
    .. method:: pinaf.__str__()
    
       Return a string describing the alternate function.
    
    .. method:: pinaf.index()
    
       Return the alternate function index.
    
    .. method:: pinaf.name()
    
       Return the name of the alternate function.
    
    .. method:: pinaf.reg()
    
       Return the base register associated with the peripheral assigned to this
       alternate function. For example, if the alternate function were TIM2_CH3
       this would return stm.TIM2