mirrors
/
micropython
mirror of https://github.com/micropython/micropython.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
micropython/ports/mimxrt/Makefile

144 lines
3.8 KiB
Makefile
Raw Normal View History

mimxrt: Add new, minimal port to NXP i.MX RT series CPUs. This is an extremely minimal port to the NXP i.MX RT, in the style of the SAMD port It's largely based on the TinyUSB mimxrt implementation, using the NXP SDK. It currently supports the Teensy 4.0 board with a REPL over the USB-VCP interface. This commit also adds the NXP SDK submodule (also from TinyUSB) to lib/nxp_driver. Note: if you already have the tinyusb submodule initialized recursively you will need to run the following as the tinyusb sub-submodules have been rearranged (upstream): git submodule deinit lib/tinyusb rm -rf .git/modules/lib/tinyusb git submodule update --init lib/tinyusb
2020-01-20 11:25:51 +00:00
BOARD ?= TEENSY40
BOARD_DIR ?= boards/$(BOARD)
BUILD ?= build-$(BOARD)
CROSS_COMPILE ?= arm-none-eabi-
ifeq ($(wildcard $(BOARD_DIR)/.),)
$(error Invalid BOARD specified: $(BOARD_DIR))
endif
include ../../py/mkenv.mk
include $(BOARD_DIR)/mpconfigboard.mk
# Qstr definitions (must come before including py.mk)
QSTR_DEFS = qstrdefsport.h
QSTR_GLOBAL_DEPENDENCIES = $(BOARD_DIR)/mpconfigboard.h
# Include py core make definitions
include $(TOP)/py/py.mk
GIT_SUBMODULES = lib/tinyusb lib/nxp_driver
MCU_DIR = lib/nxp_driver/sdk/devices/$(MCU_SERIES)
LD_FILES = boards/$(MCU_SERIES).ld $(TOP)/$(MCU_DIR)/gcc/$(MCU_SERIES)xxxxx_flexspi_nor.ld
# mcu driver cause following warnings
#CFLAGS += -Wno-error=float-equal -Wno-error=nested-externs
CFLAGS += -Wno-error=unused-parameter
INC += -I.
INC += -I$(TOP)
INC += -I$(BUILD)
INC += -I$(BOARD_DIR)
INC += -I$(TOP)/lib/cmsis/inc
INC += -I$(TOP)/$(MCU_DIR)
INC += -I$(TOP)/$(MCU_DIR)/drivers
INC += -I$(TOP)/$(MCU_DIR)/project_template
INC += -I$(TOP)/lib/tinyusb/src
INC += -I$(TOP)/lib/tinyusb/hw
INC += -I$(TOP)/lib/tinyusb/hw/bsp/teensy_40
CFLAGS_MCU = -mtune=cortex-m7 -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16
all: Enable extra conversion warnings where applicable. Add -Wdouble-promotion and -Wfloat-conversion for most ports to ban out implicit floating point conversions, and add extra Travis builds using MICROPY_FLOAT_IMPL_FLOAT to uncover warnings which weren't found previously. For the unix port -Wsign-comparison is added as well but only there since only clang supports this but gcc doesn't.
2020-04-09 12:59:11 +01:00
CFLAGS = $(INC) -Wall -Werror -Wdouble-promotion -Wfloat-conversion -std=c99 -nostdlib -mthumb $(CFLAGS_MCU)
mimxrt: Add new, minimal port to NXP i.MX RT series CPUs. This is an extremely minimal port to the NXP i.MX RT, in the style of the SAMD port It's largely based on the TinyUSB mimxrt implementation, using the NXP SDK. It currently supports the Teensy 4.0 board with a REPL over the USB-VCP interface. This commit also adds the NXP SDK submodule (also from TinyUSB) to lib/nxp_driver. Note: if you already have the tinyusb submodule initialized recursively you will need to run the following as the tinyusb sub-submodules have been rearranged (upstream): git submodule deinit lib/tinyusb rm -rf .git/modules/lib/tinyusb git submodule update --init lib/tinyusb
2020-01-20 11:25:51 +00:00
CFLAGS += -DCPU_$(MCU_SERIES) -DCPU_$(MCU_VARIANT)
CFLAGS += -DXIP_EXTERNAL_FLASH=1 \
-DXIP_BOOT_HEADER_ENABLE=1 \
-DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX \
-D__STARTUP_CLEAR_BSS \
-D__START=main \
-DCPU_HEADER_H='<$(MCU_SERIES).h>'
LDFLAGS = $(addprefix -T,$(LD_FILES)) -Map=$@.map --cref
LIBS = $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
# Tune for Debugging or Optimization
ifeq ($(DEBUG),1)
CFLAGS += -O0 -ggdb
else
CFLAGS += -Os -DNDEBUG
LDFLAGS += --gc-sections
CFLAGS += -fdata-sections -ffunction-sections
endif
# TinyUSB Stack source
SRC_TINYUSB_C += \
lib/tinyusb/src/tusb.c \
lib/tinyusb/src/common/tusb_fifo.c \
lib/tinyusb/src/device/usbd.c \
lib/tinyusb/src/device/usbd_control.c \
lib/tinyusb/src/class/msc/msc_device.c \
lib/tinyusb/src/class/cdc/cdc_device.c \
lib/tinyusb/src/class/dfu/dfu_rt_device.c \
lib/tinyusb/src/class/hid/hid_device.c \
lib/tinyusb/src/class/midi/midi_device.c \
lib/tinyusb/src/class/usbtmc/usbtmc_device.c \
lib/tinyusb/src/class/vendor/vendor_device.c \
lib/tinyusb/src/portable/nxp/transdimension/dcd_transdimension.c
SRC_TINYUSB_IMX_C += \
$(MCU_DIR)/system_$(MCU_SERIES).c \
$(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \
$(MCU_DIR)/project_template/clock_config.c \
$(MCU_DIR)/drivers/fsl_clock.c \
$(MCU_DIR)/drivers/fsl_gpio.c \
$(MCU_DIR)/drivers/fsl_common.c \
$(MCU_DIR)/drivers/fsl_lpuart.c \
$(MCU_DIR)/drivers/fsl_flexram.c \
SRC_C = \
main.c \
mimxrt: Add initial impl of machine.LED class, and basic pin support. This commit implements an LED class with rudimentary parts of a pin C API to support it. The LED class does not yet support setting an intensity. This LED class is put in the machine module for the time being, until a better place is found. One LED is supported on TEENSY40 and MIMXRT1010_EVK boards.
2020-04-12 21:00:06 +01:00
led.c \
pin.c \
mimxrt: Add new, minimal port to NXP i.MX RT series CPUs. This is an extremely minimal port to the NXP i.MX RT, in the style of the SAMD port It's largely based on the TinyUSB mimxrt implementation, using the NXP SDK. It currently supports the Teensy 4.0 board with a REPL over the USB-VCP interface. This commit also adds the NXP SDK submodule (also from TinyUSB) to lib/nxp_driver. Note: if you already have the tinyusb submodule initialized recursively you will need to run the following as the tinyusb sub-submodules have been rearranged (upstream): git submodule deinit lib/tinyusb rm -rf .git/modules/lib/tinyusb git submodule update --init lib/tinyusb
2020-01-20 11:25:51 +00:00
tusb_port.c \
board_init.c \
$(BOARD_DIR)/flash_config.c \
mimxrt: Add initial impl of machine.LED class, and basic pin support. This commit implements an LED class with rudimentary parts of a pin C API to support it. The LED class does not yet support setting an intensity. This LED class is put in the machine module for the time being, until a better place is found. One LED is supported on TEENSY40 and MIMXRT1010_EVK boards.
2020-04-12 21:00:06 +01:00
$(BOARD_DIR)/pins.c \
machine_led.c \
mimxrt: Add new, minimal port to NXP i.MX RT series CPUs. This is an extremely minimal port to the NXP i.MX RT, in the style of the SAMD port It's largely based on the TinyUSB mimxrt implementation, using the NXP SDK. It currently supports the Teensy 4.0 board with a REPL over the USB-VCP interface. This commit also adds the NXP SDK submodule (also from TinyUSB) to lib/nxp_driver. Note: if you already have the tinyusb submodule initialized recursively you will need to run the following as the tinyusb sub-submodules have been rearranged (upstream): git submodule deinit lib/tinyusb rm -rf .git/modules/lib/tinyusb git submodule update --init lib/tinyusb
2020-01-20 11:25:51 +00:00
modutime.c \
modmachine.c \
mphalport.c \
lib/mp-readline/readline.c \
lib/libc/string0.c \
all: Factor gchelper code to one place and use it for unix & ARM ports. No functionality change is intended with this commit, it just consolidates the separate implementations of GC helper code to the lib/utils/ directory as a general set of helper functions useful for any port. This reduces duplication of code, and makes it easier for future ports or embedders to get the GC implementation correct. Ports should now link against gchelper_native.c and either gchelper_m0.s or gchelper_m3.s (currently only Cortex-M is supported but other architectures can follow), or use the fallback gchelper_generic.c which will work on x86/x64/ARM. The gc_helper_get_sp function from gchelper_m3.s is not really GC related and was only used by cc3200, so it has been moved to that port and renamed to cortex_m3_get_sp.
2020-04-23 07:12:55 +01:00
lib/utils/gchelper_native.c \
mimxrt: Add new, minimal port to NXP i.MX RT series CPUs. This is an extremely minimal port to the NXP i.MX RT, in the style of the SAMD port It's largely based on the TinyUSB mimxrt implementation, using the NXP SDK. It currently supports the Teensy 4.0 board with a REPL over the USB-VCP interface. This commit also adds the NXP SDK submodule (also from TinyUSB) to lib/nxp_driver. Note: if you already have the tinyusb submodule initialized recursively you will need to run the following as the tinyusb sub-submodules have been rearranged (upstream): git submodule deinit lib/tinyusb rm -rf .git/modules/lib/tinyusb git submodule update --init lib/tinyusb
2020-01-20 11:25:51 +00:00
lib/utils/printf.c \
lib/utils/pyexec.c \
lib/utils/stdout_helpers.c \
$(SRC_TINYUSB_C) \
$(SRC_TINYUSB_IMX_C) \
SRC_SS = $(MCU_DIR)/gcc/startup_$(MCU_SERIES).S
SRC_S = lib/utils/gchelper_m3.s \
# List of sources for qstr extraction
mimxrt: Add initial impl of machine.LED class, and basic pin support. This commit implements an LED class with rudimentary parts of a pin C API to support it. The LED class does not yet support setting an intensity. This LED class is put in the machine module for the time being, until a better place is found. One LED is supported on TEENSY40 and MIMXRT1010_EVK boards.
2020-04-12 21:00:06 +01:00
SRC_QSTR += \
machine_led.c \
modutime.c \
modmachine.c \
pin.c \
$(BOARD_DIR)/pins.c \
mimxrt: Add new, minimal port to NXP i.MX RT series CPUs. This is an extremely minimal port to the NXP i.MX RT, in the style of the SAMD port It's largely based on the TinyUSB mimxrt implementation, using the NXP SDK. It currently supports the Teensy 4.0 board with a REPL over the USB-VCP interface. This commit also adds the NXP SDK submodule (also from TinyUSB) to lib/nxp_driver. Note: if you already have the tinyusb submodule initialized recursively you will need to run the following as the tinyusb sub-submodules have been rearranged (upstream): git submodule deinit lib/tinyusb rm -rf .git/modules/lib/tinyusb git submodule update --init lib/tinyusb
2020-01-20 11:25:51 +00:00
OBJ += $(PY_O)
OBJ += $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_S:.s=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_SS:.S=.o))
# Workaround for bug in older gcc, warning on "static usbd_device_t _usbd_dev = { 0 };"
$(BUILD)/lib/tinyusb/src/device/usbd.o: CFLAGS += -Wno-missing-braces
all: $(BUILD)/firmware.hex
$(BUILD)/firmware.elf: $(OBJ)
$(ECHO) "LINK $@"
$(Q)$(LD) $(LDFLAGS) -o $@ $^ $(LIBS)
$(Q)$(SIZE) $@
$(BUILD)/firmware.bin: $(BUILD)/firmware.elf
$(Q)$(OBJCOPY) -O binary $^ $@
$(BUILD)/firmware.hex: $(BUILD)/firmware.elf
$(Q)$(OBJCOPY) -O ihex -R .eeprom $< $@
include $(TOP)/py/mkrules.mk