micropython/ports/stm32/boards/B_L475E_IOT01A/mpconfigboard.mk

MCU_SERIES = l4
CMSIS_MCU = STM32L475xx
# The stm32l475 does not have a LDC controller which is
# the only diffrence to the stm32l476 - so reuse some files.
AF_FILE = boards/stm32l476_af.csv
LD_FILES = boards/stm32l476xg.ld boards/common_ifs.ld
TEXT_ADDR = 0x08004000
OPENOCD_CONFIG = boards/openocd_stm32l4.cfg
stm32/boards: Add new board B_L475E_IOT01A based on STM32L475. 2017-09-03 12:57:57 +01:00			`MCU_SERIES = l4`
			`CMSIS_MCU = STM32L475xx`
			`# The stm32l475 does not have a LDC controller which is`
			`# the only diffrence to the stm32l476 - so reuse some files.`
			`AF_FILE = boards/stm32l476_af.csv`
stm32/boards: Allow boards to have finer control over the linker script. This patch allows a particular board to independently specify the linker scripts for 1) the MCU memory layout; 2) how the different firmware sections are arranged in memory. Right now all boards follow the same layout with two separate firmware section, one for the ISR and one for the text and data. This leaves room for storage (filesystem data) to live between the firmware sections. The idea with this patch is to accommodate boards that don't have internal flash storage and only need to have one continuous firmware section. Thus the common.ld script is renamed to common_ifs.ld to make explicit that it is used for cases where the board has internal flash storage. 2018-03-27 11:17:48 +01:00			`LD_FILES = boards/stm32l476xg.ld boards/common_ifs.ld`
stm32/boards: Add new board B_L475E_IOT01A based on STM32L475. 2017-09-03 12:57:57 +01:00			`TEXT_ADDR = 0x08004000`
			`OPENOCD_CONFIG = boards/openocd_stm32l4.cfg`