mirrors
/
micropython
mirror of https://github.com/micropython/micropython.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
micropython/ports/mimxrt/boards/MIMXRT1020_EVK/mpconfigboard.mk

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

33 lines
1018 B
Makefile
Raw Normal View History

mimxrt/boards: Integrate support for MIMXRT1020_EVK board.
2020-04-14 20:08:59 +01:00
MCU_SERIES = MIMXRT1021
MCU_VARIANT = MIMXRT1021DAG5A
mimxrt: Add floating point support. Since not all boards support double fp, all board specific .mk files are affected too.
2021-05-26 10:29:34 +01:00
MICROPY_FLOAT_IMPL = double
mimxrt/sdcard: Implement SDCard driver. - Configures `PLL2->PFD0` with **198MHz** as base clock of `USDHCx` peripheral. - Adds guards for SDCard related files via `MICROPY_PY_MACHINE_SDCARD` - Adds creation of pin defines for SDCard to make-pins.py - Adds new configuration option for SDCard peripheral pinout to mpconfigport.h - Adds interrupt handling support instead of polling - Adds support for `ADMA2` powered data transfer - Configures SDCard to run in HS (high-speed mode) with **50MHz** only! SDCard support is optional and requires `USDHC` peripheral. Thus this driver is not available on `MIMXRT1010_EVK`. SDCard support is enabled by setting `MICROPY_PY_MACHINE_SDCARD = 1` in mpconfigboard.mk. Signed-off-by: Philipp Ebensberger
2021-08-01 10:20:39 +01:00
MICROPY_PY_MACHINE_SDCARD = 1
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 20:41:58 +01:00
MICROPY_HW_FLASH_TYPE ?= qspi_nor
MICROPY_HW_FLASH_SIZE ?= 0x800000 # 8MB
MICROPY_HW_SDRAM_AVAIL = 1
MICROPY_HW_SDRAM_SIZE = 0x2000000 # 32MB
mimxrt: Add support for Hyperflash chips. Hyperflash is used by the MIMXRT1050_EVKB, MIMXRT1060_EVK and MIMXRT1064_EVK boards. This commit includes: - add support for Hyperflash - modify MIMXRT1060_EVK and MIMXRT1064_EVK to change from QSPI to hyperflash. - minor incidental changes to other boards so they still build Note: Erasing a sector on the hyperflash is slow. It takes about a second, which seems too long, but matches the data sheet.
2021-07-20 07:18:18 +01:00
mimxrt/boards: Integrate support for MIMXRT1020_EVK board.
2020-04-14 20:08:59 +01:00
JLINK_PATH ?= /media/RT1020-EVK/
mimxrt: Implement machine.Pin class. - modified pin type from pin_obj_t to machine_pin_obj_t - created machine_pin.c - implemented basic version of make-pins.py to genertate pins.c/.h files automatically; the only alternate function currently supported is GPIO - added af.csv files for all supported MCUs - replaced pins.c/pins.h files with pin.csv for all boards - implemented on/off/high/low/value/init methods - Implemented IN/OUT/OPEN_DRAIN modes - modified LDFLAGS for DEBUG build to get usefull .elf file for debugging Signed-off-by: Philipp Ebensberger
2020-08-21 15:03:21 +01:00
JLINK_COMMANDER_SCRIPT = $(BUILD)/script.jlink
ifdef JLINK_IP
JLINK_CONNECTION_SETTINGS = -IP $(JLINK_IP)
else
mimxrt: Rework flash configuration. - Moves definition of BOARD_FLASH_SIZE and other header files related to flash configuration into the Makefile. - Adds board specific clock_config.h. - Adds board.h, pin_mux.h, and peripherals.h as they are required by NXP MCU SDK in order to use our own clock_config.h. - Renames board specific FlexSPI configuration files. - Updates flash frequency of MIMXRT1020_EVK - Creates separated flash_config files for QSPI NOR and QSPI Hyper flash. - Unifies VFS start address to be @ 1M for 1010 and 1020 boards. - Unifies 1050EVK boards - Adds support to both NOR and HyperFlash on boards with both capabilities. - Adds automatic FlexRAM initialization to start-up code based on linker script and NXP HAL. - Applies code formatting to all files in mimxrt port. With this change the flash configuration is restructured and organized. This simplifies the configuration process and provides a better overview of each board's settings. With the integration of clock_config.h, board.h, pin_mux.h, and peripherals.h we gain better control of the settings and clock configurations. Furthermore the implementation of an explicit FlexRAM setup improves the system performance and allows for performance tuning. Signed-off-by: Philipp Ebensberger
2021-08-20 20:41:58 +01:00
JLINK_CONNECTION_SETTINGS = -USB
mimxrt: Implement machine.Pin class. - modified pin type from pin_obj_t to machine_pin_obj_t - created machine_pin.c - implemented basic version of make-pins.py to genertate pins.c/.h files automatically; the only alternate function currently supported is GPIO - added af.csv files for all supported MCUs - replaced pins.c/pins.h files with pin.csv for all boards - implemented on/off/high/low/value/init methods - Implemented IN/OUT/OPEN_DRAIN modes - modified LDFLAGS for DEBUG build to get usefull .elf file for debugging Signed-off-by: Philipp Ebensberger
2020-08-21 15:03:21 +01:00
endif
deploy_jlink: $(BUILD)/firmware.hex
mimxrt: Rework flash configuration. - Moves definition of BOARD_FLASH_SIZE and other header files related to flash configuration into the Makefile. - Adds board specific clock_config.h. - Adds board.h, pin_mux.h, and peripherals.h as they are required by NXP MCU SDK in order to use our own clock_config.h. - Renames board specific FlexSPI configuration files. - Updates flash frequency of MIMXRT1020_EVK - Creates separated flash_config files for QSPI NOR and QSPI Hyper flash. - Unifies VFS start address to be @ 1M for 1010 and 1020 boards. - Unifies 1050EVK boards - Adds support to both NOR and HyperFlash on boards with both capabilities. - Adds automatic FlexRAM initialization to start-up code based on linker script and NXP HAL. - Applies code formatting to all files in mimxrt port. With this change the flash configuration is restructured and organized. This simplifies the configuration process and provides a better overview of each board's settings. With the integration of clock_config.h, board.h, pin_mux.h, and peripherals.h we gain better control of the settings and clock configurations. Furthermore the implementation of an explicit FlexRAM setup improves the system performance and allows for performance tuning. Signed-off-by: Philipp Ebensberger
2021-08-20 20:41:58 +01:00
$(Q)$(TOUCH) $(JLINK_COMMANDER_SCRIPT)
mimxrt: Implement machine.Pin class. - modified pin type from pin_obj_t to machine_pin_obj_t - created machine_pin.c - implemented basic version of make-pins.py to genertate pins.c/.h files automatically; the only alternate function currently supported is GPIO - added af.csv files for all supported MCUs - replaced pins.c/pins.h files with pin.csv for all boards - implemented on/off/high/low/value/init methods - Implemented IN/OUT/OPEN_DRAIN modes - modified LDFLAGS for DEBUG build to get usefull .elf file for debugging Signed-off-by: Philipp Ebensberger
2020-08-21 15:03:21 +01:00
$(ECHO) "ExitOnError 1" > $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "speed auto" >> $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "r" >> $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "st" >> $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "loadfile \"$(realpath $(BUILD)/firmware.hex)\"" >> $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "qc" >> $(JLINK_COMMANDER_SCRIPT)
$(JLINK_PATH)JLinkExe -device $(MCU_VARIANT) -if SWD $(JLINK_CONNECTION_SETTINGS) -CommanderScript $(JLINK_COMMANDER_SCRIPT)
mimxrt/boards: Integrate support for MIMXRT1020_EVK board.
2020-04-14 20:08:59 +01:00
deploy: $(BUILD)/firmware.bin
cp $< $(JLINK_PATH)